Morphological and mechanical characterization of 3D printed PLA scaffolds with controlled porosity for trabecular bone tissue replacement

Computational and experimental characterization of 3D-printed PCL structures toward the design of soft biological tissue scaffolds

(2020) Hailong Liu et al.   MATERIALS & DESIGN

Finite element evaluations of the mechanical properties of polycaprolactone/hydroxyapatite scaffolds by direct ink writing: Effects of pore geometry

(2020) Bin Zhang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Assessment of the morphology and dimensional accuracy of 3D printed PLA and PLA/HAp scaffolds

(2020) Ieva Gendviliene et al.   Journal of the Mechanical Behavior of Biomedical Materials

Production of 3D printed polylactide scaffolds with surface grafted hydrogel coatings

(2019) Piotr Kowalczyk et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue applications: Fabrication, characterization and simulation

(2019) S. Sahmani et al.   CERAMICS INTERNATIONAL

Biaxial mechanics of 3D fiber deposited ply-laminate scaffolds for soft tissue engineering part II: Finite element analyses

(2019) Mitchell Page et al.   Journal of the Mechanical Behavior of Biomedical Materials

Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces

(2018) M. Afshar et al.   Materials Science & Engineering C-Materials for Biological Applications

3D-printed biodegradable gyroid scaffolds for tissue engineering applications

(2018) Loïc Germain et al.   MATERIALS & DESIGN

Young’s modulus of trabecular bone at the tissue level: A review

(2018) Dan Wu et al.   Acta Biomaterialia

3D printing of bone scaffolds with hybrid biomaterials

(2018) BankoleI. Oladapo et al.   COMPOSITES PART B-ENGINEERING

Three-dimensional (3D) printed scaffold and material selection for bone repair

(2018) Lei Zhang et al.   Acta Biomaterialia

Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties

(2018) Fei Liu et al.   MATERIALS & DESIGN

Shape memory effect in 3D-printed scaffolds for self-fitting implants

(2017) F.S. Senatov et al.   EUROPEAN POLYMER JOURNAL

Characterization of printed PLA scaffolds for bone tissue engineering

(2017) Agathe Grémare et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Scaffolds for Bone Tissue Engineering: State of the art and new perspectives

(2017) Livia Roseti et al.   Materials Science & Engineering C-Materials for Biological Applications

Morphology, Crystallization and Thermal Behaviors of PLA-Based Composites: Wonderful Effects of Hybrid GO/PEG via Dynamic Impregnating

(2017) Shikui Jia et al.   Polymers

Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer

(2017) Aleš Gregor et al.   Journal of Biological Engineering

Role of scaffold mean pore size in meniscus regeneration

(2016) Zheng-Zheng Zhang et al.   Acta Biomaterialia

Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration

(2016) Daniel Tang et al.   BIOMATERIALS

Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds

(2016) F.S. Senatov et al.   COMPOSITES PART B-ENGINEERING

Thermal strain-induced cold crystallization of amorphous poly(lactic acid)

(2016) Chengbo Zhou et al.   CRYSTENGCOMM

Mesenchymal stem cells growth and proliferation enhancement using PLA vs PCL based nanofibrous scaffolds

(2016) Narguess H. Marei et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: The effect of layer penetration and post-heating

(2016) S. Naghieh et al.   Journal of the Mechanical Behavior of Biomedical Materials

Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds

(2016) F.S. Senatov et al.   Journal of the Mechanical Behavior of Biomedical Materials

Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures

(2016) M. Afshar et al.   Journal of the Mechanical Behavior of Biomedical Materials

Review Article: Bone Transplantation and Immune Response

(2016) Hamid Shegarfi et al.   Journal of Orthopaedic Surgery

Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair

(2015) Rachit Agarwal et al.   ADVANCED DRUG DELIVERY REVIEWS

3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration

(2015) Derek Rosenzweig et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

3D Printing of Scaffolds for Tissue Regeneration Applications

(2015) Anh-Vu Do et al.   Advanced Healthcare Materials

Strain rate effect on semi-crystalline PLLA mechanical properties measured by instrumented indentation tests

(2014) S.C. Cifuentes et al.   EUROPEAN POLYMER JOURNAL

Scaffold Design for Bone Regeneration

(2014) Liliana Polo-Corrales et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds

(2014) Tiziano Serra et al.   Materials Science & Engineering C-Materials for Biological Applications

Nanostructured scaffolds for bone tissue engineering

(2013) Xiaoming Li et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

High-resolution PLA-based composite scaffolds via 3-D printing technology

(2012) T. Serra et al.   Acta Biomaterialia

Effect of process parameters on the morphological and mechanical properties of 3D Bioextruded poly(ε‐caprolactone) scaffolds

(2012) M. Domingos et al.   RAPID PROTOTYPING JOURNAL

Biomaterials & scaffolds for tissue engineering

(2011) Fergal J. O'Brien   Materials Today

Time-dependent response of polypropylene after strain reversal

(2010) A.D. Drozdov   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES