Forced Convection Heat Transfer in Porous Structure: Effect of Morphology on Pressure Drop and Heat Transfer Coefficient
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Forced Convection Heat Transfer in Porous Structure: Effect of Morphology on Pressure Drop and Heat Transfer Coefficient
Authors
Keywords
-
Journal
Journal of Thermal Science
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2021-01-13
DOI
10.1007/s11630-021-1403-x
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Experimental and numerical study on the heat transfer and flow characteristics in shell side of helically coiled tube heat exchanger based on multi-objective optimization
- (2019) Guanghui Wang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Forced convective heat transfer of tubes sintered with partially-filled gradient metal foams (GMFs) considering local thermal non-equilibrium effect
- (2018) Z.G. Xu et al. APPLIED THERMAL ENGINEERING
- The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels
- (2018) Beibei Shen et al. APPLIED THERMAL ENGINEERING
- Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design
- (2018) Liang Gong et al. APPLIED THERMAL ENGINEERING
- Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor
- (2018) Qingguo Peng et al. ENERGY CONVERSION AND MANAGEMENT
- Effect of porosity on heat transfer and pressure drop characteristics of wet air in hydrophobic metal foam under dehumidifying conditions
- (2018) Zhancheng Lai et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Experimental study on heat transfer enhancement of gas tube partially filled with metal foam
- (2018) Yanzhe Li et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Partially metal foam wrapped tube bundle as a novel generation of air cooled heat exchangers
- (2018) N. Alvandifar et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental investigation on enhanced thermal performance of staggered tube bundles wrapped with metallic foam
- (2018) Kang Chen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and Pyramidal-lattice cores
- (2018) Xin Jin et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Thermal conductivity model of open-cell foam suitable for wide span of porosities
- (2018) Dongxu Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- An experimental study on the thermal and hydraulic characteristics of open-cell nickel and copper foams for compact heat exchangers
- (2018) Dae Yeon Kim et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Design of multifunctional lattice-frame materials for compact heat exchangers
- (2017) Karen N. Son et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experiment on the convective heat transfer from airflow to skeleton in open-cell porous foams
- (2017) Xin-lin Xia et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Investigation of turbulence effects within porous layer on the thermal performance of a partially filled pipe
- (2017) Majid Eshagh Nimvari et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Influence of Morphology on Flow Law Characteristics in Open-Cell Foams: An Overview of Usual Approaches and Correlations
- (2017) Prashant Kumar et al. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME
- State-of-the-Art of Pressure Drop in Open-Cell Porous Foams: Review of Experiments and Correlations
- (2017) Prashant Kumar et al. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME
- Heat Transfer During High Temperature Gas Flow Through Metal Foam Heat Exchangers
- (2017) Pakeeza Hafeez et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Measurement of tortuosity of porous Cu using a diffusion diaphragm cell
- (2017) Kaikan Diao et al. MEASUREMENT
- Thermal Performance Evaluation of a Double-Tube Heat Exchanger Partially Filled with Porous Media Under Turbulent Flow Regime
- (2017) Alireza Jamarani et al. TRANSPORT IN POROUS MEDIA
- Experimental and numerical study on pressure drop and heat transfer performance of grille-sphere composite structured packed bed
- (2017) Jingyu Wang et al. APPLIED ENERGY
- Experimental investigation of near compact wire mesh heat exchangers
- (2016) Renju Kurian et al. APPLIED THERMAL ENGINEERING
- Experimental study on single-phase heat transfer and pressure drop of refrigerants in a plate heat exchanger with metal-foam-filled channels
- (2016) Gholamreza Bamorovat Abadi et al. APPLIED THERMAL ENGINEERING
- Development of a new pressure drop correlation for open-cell foams based completely on theoretical grounds: Taking into account strut shape and geometric tortuosity
- (2016) Amer Inayat et al. CHEMICAL ENGINEERING JOURNAL
- A novel strengthening method for carbon fiber composite lattice truss structures
- (2016) Qianqian Wu et al. COMPOSITE STRUCTURES
- An experimental study on open cell metal foam as extended heat transfer surface
- (2016) Tisha Dixit et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Experimental hydrodynamics of high-porosity metal foam: Effect of pore density
- (2016) Özer Bağcı et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Fabrication and heat transfer characteristics of C/SiC pyramidal core lattice sandwich panel
- (2015) Kai Wei et al. APPLIED THERMAL ENGINEERING
- Thermal development in open-cell metal foam: An experiment with constant wall heat flux
- (2015) Nihad Dukhan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- An X-type lattice cored ventilated brake disc with enhanced cooling performance
- (2015) H.B. Yan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A lightweight X-type metallic lattice in single-phase forced convection
- (2015) H.B. Yan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Specific surface areas of porous Cu manufactured by Lost Carbonate Sintering: Measurements by quantitative stereology and cyclic voltammetry
- (2015) K.K. Diao et al. MATERIALS CHEMISTRY AND PHYSICS
- Characteristics of convective heat transport in a packed pebble-bed reactor
- (2015) Rahman S. Abdulmohsin et al. NUCLEAR ENGINEERING AND DESIGN
- A revisit of pressure drop-flow rate correlations for packed beds of spheres
- (2015) Esra Erdim et al. POWDER TECHNOLOGY
- Wire-woven cellular metals: The present and future
- (2015) Ki-Ju Kang PROGRESS IN MATERIALS SCIENCE
- Review of convection heat transfer and fluid flow in porous media with nanofluid
- (2015) Raed Abed Mahdi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- The geometric and thermohydraulic characterization of ceramic foams: An analytical approach
- (2014) Prashant Kumar et al. ACTA MATERIALIA
- Thermal conductivity enhancement with different fillers for epoxy resin adhesives
- (2014) Yuan-Xiang Fu et al. APPLIED THERMAL ENGINEERING
- Tortuosity studies of cellular vitreous carbon foams
- (2014) M. Letellier et al. CARBON
- Investigation of fluid flow properties in open cell foams: Darcy and weak inertia regimes
- (2014) Prashant Kumar et al. CHEMICAL ENGINEERING SCIENCE
- Effects of thermal exposure on mechanical behavior of carbon fiber composite pyramidal truss core sandwich panel
- (2014) Jiayi Liu et al. COMPOSITES PART B-ENGINEERING
- Radial two-phase thermal conductivity and wall heat transfer coefficient of ceramic sponges – Experimental results and correlation
- (2014) M. Wallenstein et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Metal foam hydrodynamics: Flow regimes from pre-Darcy to turbulent
- (2014) Nihad Dukhan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- R134a and R1234ze(E) liquid and flow boiling heat transfer in a high porosity copper foam
- (2014) Simone Mancin et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Feasibility of a wire-woven metal for application as a sandwich core
- (2014) Min-Geun Lee et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Thermofluidic Characteristics of a Porous Ventilated Brake Disk
- (2014) H. B. Yan et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Micro-structural Impact of Different Strut Shapes and Porosity on Hydraulic Properties of Kelvin-Like Metal Foams
- (2014) Prashant Kumar et al. TRANSPORT IN POROUS MEDIA
- Heat transfer coefficients for solid ceramic sponges – Experimental results and correlation
- (2013) B. Dietrich INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Air forced convection through metal foams: Experimental results and modeling
- (2013) Simone Mancin et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- The predicted compressive strength of a pyramidal lattice made from case hardened steel tubes
- (2013) L. St-Pierre et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Shear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores
- (2012) J. Xiong et al. ACTA MATERIALIA
- An appraisal of the heat transfer properties of metallic open-cell foams for strongly exo-/endo-thermic catalytic processes in tubular reactors
- (2012) Enrico Bianchi et al. CHEMICAL ENGINEERING JOURNAL
- Pressure drop correlation for ceramic and metal sponges
- (2012) Benjamin Dietrich CHEMICAL ENGINEERING SCIENCE
- Mechanical behavior of a wire-woven metal under compression
- (2012) M.G. Lee et al. COMPOSITE STRUCTURES
- A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
- (2012) Xiao-Hong Han et al. HEAT TRANSFER ENGINEERING
- Review on thermal transport in high porosity cellular metal foams with open cells
- (2012) C.Y. Zhao INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Compressive characteristics of a wire-woven cellular metal
- (2012) Min-Geun Lee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermal hydraulic performance analysis of a printed circuit heat exchanger using a helium–water test loop and numerical simulations
- (2011) In Hun Kim et al. APPLIED THERMAL ENGINEERING
- Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing
- (2011) Amer Inayat et al. CHEMICAL ENGINEERING SCIENCE
- A predictive model based on tortuosity for pressure drop estimation in ‘slim’ and ‘fat’ foams
- (2011) Jouane Ahmed et al. CHEMICAL ENGINEERING SCIENCE
- Experimental analysis of forced convective heat transfer in novel structured packed beds of particles
- (2011) Jian Yang et al. CHEMICAL ENGINEERING SCIENCE
- Field synergy principle analysis on fully developed forced convection in porous medium with uniform heat generation
- (2011) G.M. Chen et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Application of metal foams in air-cooled condensers for geothermal power plants: An optimization study
- (2011) Mostafa Odabaee et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Forced convective heat transfer in all metallic wire-woven bulk Kagome sandwich panels
- (2011) J.-H. Joo et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams
- (2011) Mo Bai et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Heat transfer performance assessment for forced convection in a tube partially filled with a porous medium
- (2011) Chen Yang et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Heat Transfer Performance of Aluminum Foams
- (2011) Simone Mancin et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited
- (2010) Amer Inayat et al. CHEMICAL ENGINEERING SCIENCE
- Thermo-hydraulic study of a single row heat exchanger consisting of metal foam covered round tubes
- (2010) C. T’Joen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Heat transfer during air flow in aluminum foams
- (2010) Simone Mancin et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Pressure drop during air flow in aluminum foams
- (2010) Simone Mancin et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances
- (2010) Zhiyong Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effect of sample’s length on flow properties of open-cell metal foam and pressure-drop correlations
- (2010) Nihad Dukhan et al. JOURNAL OF POROUS MATERIALS
- A two-permeability approach for assessing flow properties in metal foam
- (2010) Nihad Dukhan et al. JOURNAL OF POROUS MATERIALS
- A review of correlations to model the packing structure and effective thermal conductivity in packed beds of mono-sized spherical particles
- (2010) W. van Antwerpen et al. NUCLEAR ENGINEERING AND DESIGN
- Microtomography-Based Simulation of Transport through Open-Cell Metal Foams
- (2010) Karthik K. Bodla et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications
- (2009) Zhiyong Wu et al. APPLIED ENERGY
- Numerical and experimental study of forced convection in graphite foams of different configurations
- (2009) K.C. Leong et al. APPLIED THERMAL ENGINEERING
- Statistical distribution of residence time and tortuosity of flow through open-cell foams
- (2009) P. Habisreuther et al. CHEMICAL ENGINEERING SCIENCE
- Pressure drop measurements of ceramic sponges—Determining the hydraulic diameter
- (2009) Benjamin Dietrich et al. CHEMICAL ENGINEERING SCIENCE
- Towards a more realistic modeling of solid foam: Use of the pentagonal dodecahedron geometry
- (2009) Tri Truong Huu et al. CHEMICAL ENGINEERING SCIENCE
- Computational study of forced convective heat transfer in structured packed beds with spherical or ellipsoidal particles
- (2009) Jian Yang et al. CHEMICAL ENGINEERING SCIENCE
- Exergy transfer in a porous rectangular channel
- (2009) İrfan Kurtbaş et al. ENERGY
- Experimental Studies on Friction Factor and Heat Transfer Characteristics Through Wire-Woven Bulk Kagome Structure
- (2009) J.-H. Joo et al. EXPERIMENTAL HEAT TRANSFER
- A study on interstitial heat transfer in consolidated and unconsolidated porous media
- (2009) Akira Nakayama et al. HEAT AND MASS TRANSFER
- Morphological Characterization of Ceramic Sponges for Applications in Chemical Engineering
- (2009) Julia Grosse et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Use of oscillating heat pipe technique as extended surface in wire-on-tube heat exchanger for heat transfer enhancement
- (2009) Atipoang Nuntaphan et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Tomography-Based Heat and Mass Transfer Characterization of Reticulate Porous Ceramics for High-Temperature Processing
- (2009) Sophia Haussener et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- A Zigzag-formed Truss Core and its Mechanical Performances
- (2009) Heonsoo Kim et al. JOURNAL OF SANDWICH STRUCTURES & MATERIALS
- Measurement of tortuosity in aluminum foams using airborne ultrasound
- (2009) Lawrence H. Le et al. ULTRASONICS
- The effect of heat transfer on the pressure drop through a heat exchanger for aero engine applications
- (2008) C. Albanakis et al. APPLIED THERMAL ENGINEERING
- Volume Image Analysis of Ceramic Sponges
- (2008) J. Große et al. CHEMICAL ENGINEERING & TECHNOLOGY
- Pressure drop modeling on SOLID foam: State-of-the art correlation
- (2008) David Edouard et al. CHEMICAL ENGINEERING JOURNAL
- Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities
- (2008) G. Incera Garrido et al. CHEMICAL ENGINEERING SCIENCE
- Equivalent particle diameter and length scale for pressure drop in porous metals
- (2008) Nihad Dukhan et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Nickel foam-based manganese dioxide–carbon nanotube composite electrodes for electrochemical supercapacitors
- (2008) Jun Li et al. JOURNAL OF POWER SOURCES
- Numerical investigation on the flow characteristics and permeability of three-dimensional reticulated foam materials
- (2007) Weigang Xu et al. CHEMICAL ENGINEERING JOURNAL
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started