Strain-rate-sensitive mechanical response, twinning, and texture features of NiCoCrFe high-entropy alloy: Experiments, multi-level crystal plasticity and artificial neural networks modeling

Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path

(2020) Zhaofei Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Texture formation in face-centered cubic high-entropy alloys

(2020) G. Dan Sathiaraj et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling

(2019) William G. Feather et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Application of artificial neural networks in micromechanics for polycrystalline metals

(2019) Usman Ali et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A nanotwinned austenite stainless steel with high hydrogen embrittlement resistance

(2019) Y.H. Fan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Strain rate-dependent hardening with dislocation-twin interaction of Fe–Mn–Al–C steel using crystal plasticity

(2019) Z.X. Su et al.   MATERIALS SCIENCE AND TECHNOLOGY

Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents

(2019) J.T. Benzing et al.   ACTA MATERIALIA

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

(2019) T.W. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

(2018) Christian Haase et al.   ACTA MATERIALIA

Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction

(2018) Yiqiang Wang et al.   ACTA MATERIALIA

Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy

(2018) C.E. Slone et al.   ACTA MATERIALIA

Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys

(2018) He Huang et al.   ACTA MATERIALIA

Twinning-induced plasticity (TWIP) steels

(2018) Bruno C. De Cooman et al.   ACTA MATERIALIA

Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets

(2018) Milovan Zecevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Crystallographic examination of the interaction between texture evolution, mechanically induced martensitic transformation and twinning in nanostructured bainite

(2018) Lucia Morales-Rivas et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy

(2018) Jeong Min Park et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical response and deformation behavior of Al 0.6 CoCrFeNi high-entropy alloys upon dynamic loading

(2018) L. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy

(2018) Qingyun Lin et al.   Materials Research Letters

Investigation of the mechanical response of single crystal magnesium considering slip and twin

(2018) S. Kweon et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Anisotropy and strain rate effects on the failure behavior of TWIP steel: A multiscale experimental study

(2018) Manjunatha Madivala et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy

(2017) N.D. Stepanov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy

(2017) Wael Abuzaid et al.   MATERIALS CHARACTERIZATION

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

(2017) S.-H. Joo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic deformation behaviors and constitutive relations of an AlCoCr 1.5 Fe 1.5 NiTi 0.5 high-entropy alloy

(2017) T.W. Zhang et al.   SCRIPTA MATERIALIA

Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite

(2017) Aijun Zhang et al.   MATERIALS & DESIGN

High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure

(2017) Z. Li et al.   Scientific Reports

Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion

(2017) Wenqian Wu et al.   Scientific Reports

A crystal plasticity model for twinning- and transformation-induced plasticity

(2016) Su Leen Wong et al.   ACTA MATERIALIA

Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys

(2016) Zhenggang Wu et al.   ACTA MATERIALIA

Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy

(2016) G. Dan Sathiaraj et al.   INTERMETALLICS

Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion

(2016) Bin Liu et al.   INTERMETALLICS

Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy

(2016) Milan Ardeljan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dynamic tensile properties of a single crystal Nickel-base superalloy at high temperatures measured with an improved SHTB technique

(2016) Jianjun Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel

(2015) Z.Y. Liang et al.   ACTA MATERIALIA

Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy

(2015) Miroslav Zecevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain rate effect of high purity aluminum single crystals: Experiments and simulations

(2015) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructure and properties of a refractory high-entropy alloy after cold working

(2015) O.N. Senkov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Tensile properties of low-stacking fault energy high-entropy alloys

(2015) A.J. Zaddach et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy

(2015) N. Kumar et al.   MATERIALS & DESIGN

Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

(2014) Z. Wu et al.   ACTA MATERIALIA

A robust and efficient substepping scheme for the explicit numerical integration of a rate-dependent crystal plasticity model

(2014) K. Zhang et al.   INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING

A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys

(2014) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites

(2014) Milan Ardeljan et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

(2013) J.Y. He et al.   ACTA MATERIALIA

Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling

(2013) Marko Knezevic et al.   ACTA MATERIALIA

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

(2013) P.P. Bhattacharjee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modeling and experimental verification of thermo-mechanical coupled behavior of face-centered-cubic polycrystals

(2013) Dan Zhao et al.   MATERIALS & DESIGN

Ab initioinvestigation of high-entropy alloys of 3delements

(2013) Fuyang Tian et al.   PHYSICAL REVIEW B

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

(2012) David R. Steinmetz et al.   ACTA MATERIALIA

Coupled effects of the lattice rotation definition, twinning and interaction strength on the FCC rolling texture evolution using the viscoplastic ϕ-model

(2012) W. Wen et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity

(2012) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dynamic mechanical properties of the Fe–30Mn–3Si–4Al TWIP steel after different heat treatments

(2011) Zhi-ping Xiong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm

(2011) Florian Bachmann et al.   ULTRAMICROSCOPY

The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel

(2010) I. Gutierrez-Urrutia et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain hardening and heterogeneous deformation during twinning in Hadfield steel

(2009) C. Efstathiou et al.   ACTA MATERIALIA

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications

(2009) F. Roters et al.   ACTA MATERIALIA

Prediction of cold rolling texture of steels using an Artificial Neural Network

(2009) Abhijit Brahme et al.   COMPUTATIONAL MATERIALS SCIENCE

Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel

(2008) Y.C. Lin et al.   COMPUTATIONAL MATERIALS SCIENCE

A novel pole figure inversion method: specification of theMTEXalgorithm

(2008) R. Hielscher et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions

(2008) D. Barbier et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method

(2007) H.W. Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A dislocation-based constitutive law for pure Zr including temperature effects

(2007) I.J. Beyerlein et al.   INTERNATIONAL JOURNAL OF PLASTICITY