Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion

Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures

(2017) Feng He et al.   SCRIPTA MATERIALIA

Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co 25 Ni 25 Fe 25 Al 7.5 Cu 17.5 high-entropy alloy

(2016) Zhiqiang Fu et al.   ACTA MATERIALIA

Ductile CoCrFeNiMo x high entropy alloys strengthened by hard intermetallic phases

(2016) W.H. Liu et al.   ACTA MATERIALIA

Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion

(2016) Bin Liu et al.   INTERMETALLICS

Anomalies in the deformation mechanism and kinetics of coarse-grained high entropy alloy

(2016) Mageshwari Komarasamy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of high pressure torsion on microstructures and properties of an Al 0.1 CoCrFeNi high-entropy alloy

(2016) P.F. Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-entropy alloy: challenges and prospects

(2016) Y.F. Ye et al.   Materials Today

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

(2015) X.D. Xu et al.   ACTA MATERIALIA

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

(2015) B. Schuh et al.   ACTA MATERIALIA

Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy

(2015) N. Stepanov et al.   INTERMETALLICS

Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing

(2015) Q.H. Tang et al.   MATERIALS LETTERS

Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins

(2015) Y. Cao et al.   SCRIPTA MATERIALIA

Dislocation–Twin Boundary Interactions Induced Nanocrystalline via SPD Processing in Bulk Metals

(2015) Fucheng Zhang et al.   Scientific Reports

Influence of dislocation–solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion

(2014) Kaveh Edalati et al.   ACTA MATERIALIA

High-Entropy Alloys: A Critical Review

(2014) Ming-Hung Tsai et al.   Materials Research Letters

Hexagonal High-entropy Alloys

(2014) Michael Feuerbacher et al.   Materials Research Letters

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Atomic Structure Modeling of Multi-Principal-Element Alloys by the Principle of Maximum Entropy

(2013) Shaoqing Wang   Entropy

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

(2013) Z. Wu et al.   INTERMETALLICS

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

(2013) A. J. Zaddach et al.   JOM

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials

(2012) S. Ni et al.   ACTA MATERIALIA

Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging

(2011) I. Gutierrez-Urrutia et al.   ACTA MATERIALIA

Deformation twinning in nanocrystalline materials

(2011) Y.T. Zhu et al.   PROGRESS IN MATERIALS SCIENCE

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium

(2010) D.K. Yang et al.   ACTA MATERIALIA

Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu–Al alloy processed by dynamic plastic deformation

(2010) C.S. Hong et al.   ACTA MATERIALIA

Dislocation–twin interactions in nanocrystalline fcc metals

(2010) Y.T. Zhu et al.   ACTA MATERIALIA

The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion

(2010) Y.B. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dislocation structures of Σ3 {112} twin boundaries in face centered cubic metals

(2009) J. Wang et al.   APPLIED PHYSICS LETTERS

Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids

(2009) Yih-Farn Kao et al.   CORROSION SCIENCE

Strong Strain Hardening in Nanocrystalline Nickel

(2009) X. L. Wu et al.   PHYSICAL REVIEW LETTERS

First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr

(2009) M. T. Pérez-Prado et al.   PHYSICAL REVIEW LETTERS

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

(2009) K. Lu et al.   SCIENCE

Revealing the Maximum Strength in Nanotwinned Copper

(2009) L. Lu et al.   SCIENCE

Nanoscale structural refinement via deformation twinning in face-centered cubic metals

(2009) N.R. Tao et al.   SCRIPTA MATERIALIA

Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals

(2008) Z.-H. Jin et al.   ACTA MATERIALIA

Microband-induced plasticity in a high Mn–Al–C light steel

(2008) Je Doo Yoo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Inverse Grain-Size Effect on Twinning in Nanocrystalline Ni

(2008) X. L. Wu et al.   PHYSICAL REVIEW LETTERS

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures

(2007) Y.S. Li et al.   ACTA MATERIALIA