A review of modified metal bipolar plates for proton exchange membrane fuel cells
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A review of modified metal bipolar plates for proton exchange membrane fuel cells
Authors
Keywords
PEMFC, BBP, Metal, Corrosion resistance, ICR
Journal
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Volume -, Issue -, Pages -
Publisher
Elsevier BV
Online
2021-01-02
DOI
10.1016/j.ijhydene.2020.12.074
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Superior conducting polypyrrole anti-corrosion coating containing functionalized carbon powders for 304 stainless steel bipolar plates in proton exchange membrane fuel cells
- (2020) Zhihao Chen et al. CHEMICAL ENGINEERING JOURNAL
- Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC
- (2020) Jiefu Shi et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Stainless steel bipolar plate coated with polyaniline/Zn-Porphyrin composites coatings for proton exchange membrane fuel cell
- (2020) M. A. Deyab et al. Scientific Reports
- Properties of a Plasma-Nitrided Coating and a CrNx Coating on the Stainless Steel Bipolar Plate of PEMFC
- (2020) Meiling Xu et al. Coatings
- Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti–6Al–4V bipolar plates for PEMFC
- (2020) Jie Jin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Formable chromium nitride coatings for proton exchange membrane fuel cell stainless steel bipolar plates
- (2020) Emile Haye et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrophobic octadecylamine-functionalized graphene/TiO2 hybrid coating for corrosion protection of copper bipolar plates in simulated proton exchange membrane fuel cell environment
- (2020) Zahra Sadeghian et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Electrodeposited Ni–Mo–Cr–P coatings for AISI 1020 steel bipolar plates
- (2020) Uttam K. Chanda et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The frequency of pulsed DC sputtering power introducing the graphitization and the durability improvement of amorphous carbon films for metallic bipolar plates in proton exchange membrane fuel cells
- (2020) Xiaobo Li et al. JOURNAL OF POWER SOURCES
- Effect of N+ Implantation on Surface Characteristics of 316L Stainless Steels for Bipolar Plate in PEMFC
- (2020) Yu-Sung Kim et al. Coatings
- ZrC Coating Modified Ti Bipolar Plate for Proton Exchange Membrane Fuel Cell
- (2020) P.C. Zhang et al. Fuel Cells
- Investigation of incorporating oxygen into TiN coating to resist high potential effects on PEMFC bipolar plates in vehicle applications
- (2020) Jie Jin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Interface-induced degradation of amorphous carbon films/stainless steel bipolar plates in proton exchange membrane fuel cells
- (2020) Hao Li et al. JOURNAL OF POWER SOURCES
- Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell
- (2020) Pengchao Zhang et al. SURFACE & COATINGS TECHNOLOGY
- Molybdenum carbide coated 316L stainless steel for bipolar plates of proton exchange membrane fuel cells
- (2019) Lun Wang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Cr2N coated martensitic stainless steels by pack cementation process as materials for bipolar plates of proton exchange membrane fuel cells
- (2019) Y.Q. Hu et al. JOURNAL OF POWER SOURCES
- Anode bleeding experiments to improve the performance and durability of proton exchange membrane fuel cells
- (2019) Murat Gökhan Eskin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells
- (2019) Peiyun Yi et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Poly( m ‐phenylenediamine)‐coated 316L SS: A promising material for bipolar plates in PEMFC environment
- (2019) Chellakkutty Shanmugham et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Corrosion and interfacial contact resistance of 316L stainless steel coated with magnetron sputtered ZrN and TiN in the simulated cathodic environment of a proton-exchange membrane fuel cell
- (2019) Pan Yi et al. SURFACE & COATINGS TECHNOLOGY
- Investigation of diffusion alloying time on electrochemical behavior and conductivity of Nb-modified AISI 430 SS as PEMFC bipolar plate
- (2019) Fupeng Cheng et al. ANTI-CORROSION METHODS AND MATERIALS
- Synthesis and characterization of conductive ceramic MAX-phase coatings for metal bipolar plates in simulated PEMFC environments
- (2019) J.L. Lu et al. CORROSION SCIENCE
- Performance of surface chromizing layer on 316L stainless steel for proton exchange membrane fuel cell bipolar plates
- (2019) Zhihao Dong et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- A reactive-sputter-deposited TiSiN nanocomposite coating for the protection of metallic bipolar plates in proton exchange membrane fuel cells
- (2019) Shuang Peng et al. CERAMICS INTERNATIONAL
- Characterization of Ti3SiC2-coating on stainless steel bipolar plates in simulated proton exchange membrane fuel cell environments
- (2019) J.L. Lu et al. ELECTROCHEMISTRY COMMUNICATIONS
- Enhanced anticorrosion performance of PPY-graphene oxide/PPY-camphorsulfonic acid composite coating for 304SS bipolar plates in proton exchange membrane fuel cell
- (2019) Li Jiang et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells
- (2019) Sharif Jannat et al. JOURNAL OF POWER SOURCES
- Performance of Tantalum Modified 316L Stainless Steel Bipolar Plate for Proton Exchange Membrane Fuel Cell
- (2019) T. Li et al. Fuel Cells
- Corrosion Resistant Al‐Cr‐Mo Alloy Coating on Type 316L Stainless Steel Bipolar Plates for Proton Exchange Membrane Fuel Cell Applications
- (2019) A. V. Ingle et al. Fuel Cells
- Corrosion resistant quaternary Al–Cr–Mo–N coating on type 316L stainless steel bipolar plates for proton exchange membrane fuel cells
- (2019) Avinash V. Ingle et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Investigation on physical and electrochemical properties of TiN-coated Monel alloy used for bipolar plates of proton exchange membrane fuel cell
- (2019) Mohammad Matboo Ghorbani et al. MATERIALS CHEMISTRY AND PHYSICS
- Improving performance in PEMFC by applying different coatings to metallic bipolar plates
- (2019) F. Madadi et al. MATERIALS CHEMISTRY AND PHYSICS
- Synthesis and corrosion protection of Nb doped TiO2 nanopowders modified polyaniline coating on 316 stainless steel bipolar plates for proton-exchange membrane fuel cells
- (2019) Yanli Wang et al. PROGRESS IN ORGANIC COATINGS
- Effects of assembly torque on a proton exchange membrane fuel cell with stamped metallic bipolar plates
- (2018) Chen-Yu Chen et al. ENERGY
- Optimization design of the cathode flow channel for proton exchange membrane fuel cells
- (2018) Linhao Fan et al. ENERGY CONVERSION AND MANAGEMENT
- Electrochemical study of Monel alloy corrosion in hydrochloric acid solution and pyrrolidine dithiocarboxylate self-assembled monolayers as its corrosion protector
- (2018) Mojtaba Bagherzadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Carbon composite coatings on Ti for corrosion protection as bipolar plates of proton exchange membrane fuel cells
- (2018) Pingping Gao et al. Micro & Nano Letters
- Formation of 3D graphene–Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell
- (2018) Yeoseon Sim et al. Journal of Materials Chemistry A
- Impact of Film Thickness on Defects and the Graphitization of Nanothin Carbon Coatings Used for Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cells
- (2018) Peiyun Yi et al. ACS Applied Materials & Interfaces
- Preparation and performances of electrically conductive Nb-doped TiO2 coatings for 316 stainless steel bipolar plates of proton-exchange membrane fuel cells
- (2018) Yanli Wang et al. CORROSION SCIENCE
- Studies on the physical and electrochemical properties of Ni-P coating on commercial aluminum as bipolar plate in PEMFC
- (2018) A.G. González-Gutiérrez et al. FUEL
- Microstructure and properties of a-C films deposited under different argon flow rate on stainless steel bipolar plates for proton exchange membrane fuel cells
- (2018) Peiyun Yi et al. JOURNAL OF POWER SOURCES
- Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells
- (2017) S. Pugal Mani et al. ENERGY
- Self-assembled graphene film to enable highly conductive and corrosion resistant aluminum bipolar plates in fuel cells
- (2017) Peng Chen et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Surface modification of 316 stainless steel with platinum for the application of bipolar plates in high performance proton exchange membrane fuel cells
- (2017) Kaijie Lin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review
- (2017) Nur Fawwaz Asri et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Developments of electric cars and fuel cell hydrogen electric cars
- (2017) Tabbi Wilberforce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Degradation of graphene coated copper in simulated proton exchange membrane fuel cell environment: Electrochemical impedance spectroscopy study
- (2017) Y.J. Ren et al. JOURNAL OF POWER SOURCES
- The Corrosion Resistance Behaviors of Metallic Bipolar Plates for PEMFC Coated with Physical Vapor Deposition (PVD): An Experimental Study
- (2016) H. Kahraman et al. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
- Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid
- (2016) Z.B. Wang et al. CORROSION SCIENCE
- Stability of type 310S stainless steel bipolar plates tested at various current densities in proton exchange membrane fuel cells
- (2016) Masanobu Kumagai et al. ELECTROCHIMICA ACTA
- Mitigation studies of carbon corrosion by optimizing the opening size of the cathode outlet in a proton exchange membrane fuel cell with dead-ended anode
- (2016) Ben Chen et al. ENERGY CONVERSION AND MANAGEMENT
- Durability and characterization studies of chromium carbide coated aluminum fuel cell stack
- (2016) Y. Hung et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Electrodeposited conductive polypyrrole/polyaniline composite film for the corrosion protection of copper bipolar plates in proton exchange membrane fuel cells
- (2016) T.J. Pan et al. JOURNAL OF POWER SOURCES
- Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells
- (2016) M. Alishahi et al. JOURNAL OF POWER SOURCES
- A review on unitized regenerative fuel cell technologies, part-A: Unitized regenerative proton exchange membrane fuel cells
- (2016) Yifei Wang et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Effects of operation temperature and reactant gas humidity levels on performance of PEM fuel cells
- (2016) Dilek Nur Ozen et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Chromium interlayer amorphous carbon film for 304 stainless steel bipolar plate of proton exchange membrane fuel cell
- (2016) Wu Mingge et al. SURFACE & COATINGS TECHNOLOGY
- Optimisation of pack chromised stainless steel for proton exchange membrane fuel cells bipolar plates using response surface methodology
- (2016) A.M. Oladoye et al. SURFACE & COATINGS TECHNOLOGY
- Corrosion resistance of a tungsten modified AISI 430 stainless steel bipolar plate for proton exchange membrane fuel cells
- (2016) Jinlong Cui et al. RSC Advances
- Operation characteristics and carbon corrosion of PEMFC (Proton exchange membrane fuel cell) with dead-ended anode for high hydrogen utilization
- (2015) Ben Chen et al. ENERGY
- Molybdenum addition enhancing the corrosion behaviors of 316 L stainless steel in the simulated cathodic environment of proton exchange membrane fuel cell
- (2015) D.G. Li et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Low-nickel austenitic stainless steel as an alternative to 316L bipolar plate for proton exchange membrane fuel cells
- (2015) Subash Rajasekar et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Effect of nitrides on the corrosion behaviour of 316L SS bipolar plates for Proton Exchange Membrane Fuel Cell (PEMFC)
- (2015) S. Pugal Mani et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Preparation of corrosion-resistant and conductive trivalent Cr–C coatings on 304 stainless steel for use as bipolar plates in proton exchange membrane fuel cells by electrodeposition
- (2015) Hsiang-Cheng Wang et al. JOURNAL OF POWER SOURCES
- Multilayer graphene for long-term corrosion protection of stainless steel bipolar plates for polymer electrolyte membrane fuel cell
- (2015) Adam C. Stoot et al. JOURNAL OF POWER SOURCES
- The potential of using nanofluids in PEM fuel cell cooling systems: A review
- (2015) M.R. Islam et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Active screen plasma surface co-alloying treatments of 316 stainless steel with nitrogen and silver for fuel cell bipolar plates
- (2015) Kaijie Lin et al. SURFACE & COATINGS TECHNOLOGY
- Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite CrC films
- (2014) Kristian Nygren et al. APPLIED SURFACE SCIENCE
- Cr 2 O 3 /C composite coatings on stainless steel 304 as bipolar plate for proton exchange membrane fuel cell
- (2014) Kaikai Huang et al. ENERGY
- Investigation of single-layer and multilayer coatings for aluminum bipolar plate in polymer electrolyte membrane fuel cell
- (2014) Zhuguo Li et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Active screen plasma nitriding of 316 stainless steel for the application of bipolar plates in proton exchange membrane fuel cells
- (2014) Kaijie Lin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: Materials, fabrication, and material selection
- (2014) Reza Taherian JOURNAL OF POWER SOURCES
- Study on dimensional and corrosion properties of thixoformed A356 and AA7075 aluminum bipolar plates for proton exchange membrane fuel cells
- (2014) Amir Bolouri et al. RENEWABLE ENERGY
- The study of electroplating trivalent CrC alloy coatings with different current densities on stainless steel 304 as bipolar plate of proton exchange membrane fuel cells
- (2014) Hsiang-Cheng Wang et al. THIN SOLID FILMS
- In situ synthesis of graphene/carbon nanotube modified ordered mesoporous carbon as protective film of stainless steel bipolar plates for proton exchange membrane fuel cells
- (2014) Hairong Xue et al. RSC Advances
- The effect of formic acid concentration on the conductivity and corrosion resistance of chromium carbide coatings electroplated with trivalent chromium
- (2013) Chen-En Lu et al. APPLIED SURFACE SCIENCE
- Manufacturing and performance assessment of stamped, laser welded, and nitrided FeCrV stainless steel bipolar plates for proton exchange membrane fuel cells
- (2013) M.P. Brady et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Ni–P and Ni–Mo–P modified aluminium alloy 6061 as bipolar plate material for proton exchange membrane fuel cells
- (2013) Amani E. Fetohi et al. JOURNAL OF POWER SOURCES
- Composition optimization of multilayered chromium-nitride–carbon film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells
- (2013) Peiyun Yi et al. JOURNAL OF POWER SOURCES
- An investigation of coated aluminium bipolar plates for PEMFC
- (2012) Chien-Hung Lin et al. APPLIED ENERGY
- Ni–P and Ni–Co–P coated aluminum alloy 5251 substrates as metallic bipolar plates for PEM fuel cell applications
- (2012) Amani E. Fetohi et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Electroless Ni–Cu–P/nano-graphite composite coatings for bipolar plates of proton exchange membrane fuel cells
- (2012) Cheng-Kuo Lee JOURNAL OF POWER SOURCES
- Direct observation of the passive layer on high nitrogen stainless steel used as bipolar plates for proton exchange membrane fuel cells
- (2012) Masanobu Kumagai et al. JOURNAL OF POWER SOURCES
- Niobized AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cell
- (2012) Lixia Wang et al. JOURNAL OF POWER SOURCES
- Electrocatalyst approaches and challenges for automotive fuel cells
- (2012) Mark K. Debe NATURE
- Electrically conductive polymer composite coating on aluminum for PEM fuel cells bipolar plate
- (2012) Choong-Hyun Lee et al. RENEWABLE ENERGY
- Deposition and characterization of magnetron sputtered amorphous Cr–C films
- (2012) Matilda Andersson et al. VACUUM
- Nanocrystalline hard chromium electrodeposition from trivalent chromium bath containing carbamide and formic acid: Structure, composition, electrochemical corrosion behavior, hardness and wear characteristics of deposits
- (2011) F.I. Danilov et al. APPLIED SURFACE SCIENCE
- Formation of nano-contacts on Fe–Ni–Cr alloy for bipolar plate of proton exchange membrane fuel cell
- (2011) Lu Guo et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The characteristics and performance of AISI 1045 steel bipolar plates with chromized coatings for proton exchange membrane fuel cells
- (2011) Ching-Yuan Bai et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions
- (2011) Mevlut Fatih Peker et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Corrosion resistance and interfacial contact resistance of TiN coated 316L bipolar plates for proton exchange membrane fuel cell
- (2011) Rujin Tian et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- CrN/Cr multilayer coating on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells
- (2011) Huabing Zhang et al. JOURNAL OF POWER SOURCES
- Surface modification by carbon ion implantation for the application of ni-based amorphous alloys as bipolar plate in proton exchange membrane fuel cells
- (2011) Min-Uk Kim et al. METALS AND MATERIALS INTERNATIONAL
- Electrodeposition of hard nanocrystalline chrome from aqueous sulfate trivalent chromium bath
- (2011) V.S. Protsenko et al. THIN SOLID FILMS
- A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
- (2010) Yun Wang et al. APPLIED ENERGY
- Corrosion of metal bipolar plates for PEM fuel cells: A review
- (2010) Renato A. Antunes et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Deposition of gold–titanium and gold–nickel coatings on electropolished 316L stainless steel bipolar plates for proton exchange membrane fuel cells
- (2010) Young-Hoon Yun INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Chromium-containing carbon film on stainless steel as bipolar plates for proton exchange membrane fuel cells
- (2010) Bo Wu et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- High-density plasma nitriding of AISI 316L for bipolar plate in proton exchange membrane fuel cell
- (2010) Wonhyuk Hong et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Applicability of extra low interstitials ferritic stainless steels for bipolar plates of proton exchange membrane fuel cells
- (2010) Masanobu Kumagai et al. JOURNAL OF POWER SOURCES
- Surface modification and performance of inexpensive Fe-based bipolar plates for proton exchange membrane fuel cells
- (2010) Ching-Yuan Bai et al. JOURNAL OF POWER SOURCES
- Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates: Part 1. Corrosion, interfacial contact resistance, and surface structure
- (2010) M.P. Brady et al. JOURNAL OF POWER SOURCES
- Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates
- (2010) José Barranco et al. JOURNAL OF POWER SOURCES
- Facile Fabrication of Superhydrophobic Octadecylamine-Functionalized Graphite Oxide Film
- (2010) Ziyin Lin et al. LANGMUIR
- Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cells
- (2009) Kai Feng et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Corrosion behaviors and contact resistances of the low-carbon steel bipolar plate with a chromized coating containing carbides and nitrides
- (2009) Ching-Yuan Bai et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Ni–Cr Co-implanted 316L stainless steel as bipolar plate in polymer electrolyte membrane fuel cells
- (2009) Kai Feng et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The bipolar plate of AISI 1045 steel with chromized coatings prepared by low-temperature pack cementation for proton exchange membrane fuel cell
- (2009) Ching-Yuan Bai et al. JOURNAL OF POWER SOURCES
- Corrosion protection of type 304 stainless steel bipolar plates of proton-exchange membrane fuel cells by doped polyaniline coating
- (2009) Y.J. Ren et al. JOURNAL OF POWER SOURCES
- Thermally nitrided Cu–5.3Cr alloy for application as metallic separators in PEMFCs
- (2008) Hye-Youn Lee et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Carbon-based films coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cells
- (2008) Y FU et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Optimized Cr-nitride film on 316L stainless steel as proton exchange membrane fuel cell bipolar plate
- (2008) Y FU et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Catalyst layer-free carbon-coated steel—An easy route to bipolar plates of polymer electrolyte membrane fuel cells: Characterization on structure and electrochemistry
- (2008) Chih-Yeh Chung et al. JOURNAL OF POWER SOURCES
- Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating
- (2007) Yu Fu et al. JOURNAL OF POWER SOURCES
- Carbon film-coated 304 stainless steel as PEMFC bipolar plate
- (2007) Chih-Yeh Chung et al. JOURNAL OF POWER SOURCES
- Corrosion resistance of chromized 316L stainless steel for PEMFC bipolar plates
- (2007) K.H. Cho et al. JOURNAL OF POWER SOURCES
- A novel design and micro-fabrication for copper (Cu) electroforming bipolar plates
- (2007) Shou-Shing Hsieh et al. MICRON
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now