Thermal performance of phase change material–based heat sink for passive cooling of electronic components: An experimental study

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

(2020) Yongping Huang et al.   HEAT TRANSFER ENGINEERING

Phase change heat transfer in an L-Shape heatsink occupied with paraffin-copper metal foam

(2020) Ali Chamkha et al.   APPLIED THERMAL ENGINEERING

Nanoparticles enhanced phase change materials (NePCMs)-A recent review

(2020) Syeda Laraib Tariq et al.   APPLIED THERMAL ENGINEERING

Pore-scale investigation on effects of void cavity distribution on melting of composite phase change materials

(2020) Xinyi Li et al.   APPLIED ENERGY

Thermal transport process of metal foam/paraffin composite (MFPC) with solid-liquid phase change: An experimental study

(2020) Yuanpeng Yao et al.   APPLIED THERMAL ENGINEERING

Experimental and numerical assessments of thermal transport in fins and metal foam infused latent heat thermal energy storage systems: A comparative evaluation

(2020) Varun Joshi et al.   APPLIED THERMAL ENGINEERING

A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams

(2019) Tauseef-ur-Rehman et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Investigation of functionally graded metal foam thermal management system for solar cell

(2019) Weng Cheong Tan et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Thermal performance analysis of metallic foam-based heat sinks embedded with RT-54HC paraffin: an experimental investigation for electronic cooling

(2019) Tauseef-ur- Rehman et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

An experimental approach to investigate thermal performance of paraffin wax and 1-hexadecanol based heat sinks for cooling of electronic system

(2019) Kin Yuen Leong et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Experimental study on the thermal behavior of RT-35HC paraffin within copper and Iron-Nickel open cell foams: Energy storage for thermal management of electronics

(2019) Tauseef-ur- Rehman et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation on the thermal management performance of heat sink using low melting point alloy as phase change material

(2019) Liang Zhao et al.   RENEWABLE ENERGY

Thermal management and uniform temperature regulation of photovoltaic modules using hybrid phase change materials-nanofluids system

(2019) Ali Hassan et al.   RENEWABLE ENERGY

Transversely isotropic thermal properties of carbon nanotubes containing vacancies

(2018) R. Kothari et al.   ACTA MECHANICA

Thermal performance of copper foam/paraffin composite phase change material

(2018) Huanpei Zheng et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation of Phase Change Materials for thermal management of handheld devices

(2018) Yash Ganatra et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Pore-scale visualization and measurement of paraffin melting in high porosity open-cell copper foam

(2018) Yuanpeng Yao et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Comprehensive analysis of melting and solidification of a phase change material in an annulus

(2018) Rohit Kothari et al.   HEAT AND MASS TRANSFER

Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling

(2018) Tauseef-ur- Rehman et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems

(2018) Tauseef-ur- Rehman et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices

(2017) Hafiz Muhammad Ali et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material

(2016) Hongfei Wang et al.   APPLIED ENERGY

Numerical analysis and comparison of the thermal performance enhancement methods for metal foam/phase change material composite

(2016) Feng Zhu et al.   APPLIED THERMAL ENGINEERING

Transient performance of a thermal energy storage-based heat sink using a liquid metal as the phase change material

(2016) Li-Wu Fan et al.   APPLIED THERMAL ENGINEERING

Local Thermal Nonequilibrium During Melting of a Paraffin Filled in an Open-Cell Copper Foam: A Visualized Study at the Pore-Scale

(2016) Li-Wu Fan et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Melting of phase change material assisted by expanded metal mesh

(2015) Ahmad Mustaffar et al.   APPLIED THERMAL ENGINEERING

Unidirectional freezing of phase change materials saturated in open-cell metal foams

(2015) Shangsheng Feng et al.   APPLIED THERMAL ENGINEERING

Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components

(2015) Salma Gharbi et al.   APPLIED THERMAL ENGINEERING

Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems

(2015) M.J. Hosseini et al.   ENERGY AND BUILDINGS

Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment

(2015) W.G. Alshaer et al.   ENERGY CONVERSION AND MANAGEMENT

A numerical method for PCM-based pin fin heat sinks optimization

(2015) R. Pakrouh et al.   ENERGY CONVERSION AND MANAGEMENT

Developments in organic solid–liquid phase change materials and their applications in thermal energy storage

(2015) R.K. Sharma et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure

(2014) Babak Kamkari et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling

(2014) Sandesh S. Chougule et al.   JOURNAL OF ELECTRONIC PACKAGING

Effects of a Thick Plate on the Excess Temperature of Iso-Heat Flux Heat Sources Cooled by Laminar Forced Convection Flow: Conjugate Analysis

(2014) M. R. Hajmohammadi et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks

(2013) Saad Mahmoud et al.   APPLIED ENERGY

Preparation and thermal characterization of paraffin/metal foam composite phase change material

(2013) X. Xiao et al.   APPLIED ENERGY

Thermal optimization of PCM based pin fin heat sinks: An experimental study

(2013) Rajesh Baby et al.   APPLIED THERMAL ENGINEERING

Experimental investigations on thermal performance enhancement and effect of orientation on porous matrix filled PCM based heat sink

(2013) Rajesh Baby et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Phi and Psi shaped conductive routes for improved cooling in a heat generating piece

(2013) M.R. Hajmohammadi et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Evolutionary techniques in optimizing machining parameters: Review and recent applications (2007–2011)

(2012) Norfadzlan Yusup et al.   EXPERT SYSTEMS WITH APPLICATIONS

Radiation Effect on Constructal Design Analysis of a T-Y-Shaped Assembly of Fins

(2012) Mohammad Reza HAJMOHAMMADI et al.   Journal of Thermal Science and Technology

Energy and cost optimization of a plate and fin heat exchanger using genetic algorithm

(2011) Hamidreza Najafi et al.   APPLIED THERMAL ENGINEERING

Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling

(2011) Rajesh Baby et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer correlations for PCM-based heat sinks with plate fins

(2010) S.K. Saha et al.   APPLIED THERMAL ENGINEERING

Active cooling of a mobile phone handset

(2010) Ronan Grimes et al.   APPLIED THERMAL ENGINEERING

Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials

(2010) D. Zhou et al.   APPLIED THERMAL ENGINEERING

A Universal Performance Chart for CPU Cooling Devices

(2008) Kim Choon Ng et al.   HEAT TRANSFER ENGINEERING

Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials

(2008) S. K. Saha et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Thermal Management of Low Profile Electronic Equipment Using Radial Fans and Heat Sinks

(2008) Ed Walsh et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Fabrication and properties of graphite flakes/metal composites for thermal management applications

(2008) R. Prieto et al.   SCRIPTA MATERIALIA