Corrosion behavior and thermos-physical properties of a promising Yb2O3 and Y2O3 co-stabilized ZrO2 ceramic for thermal barrier coatings subject to calcium-magnesium-aluminum-silicate (CMAS) deposition: experiments and first-principles calculation

Infiltration mechanism of Ca-Mg-Al-silicate (CMAS) melt on Yttria stabilized zirconia (YSZ) columnar crystal at high temperature: First-principles research

(2020) Peifeng Zhou et al.   APPLIED SURFACE SCIENCE

Investigation of CMAS resistance of sacrificial plasma-sprayed mullite-YSZ protective layer on 8YSZ thermal barrier coating

(2020) Huanjie Fang et al.   CORROSION SCIENCE

Corrosion resistant plasma sprayed (Y0.8Gd0.2)3Al5O12/YSZ thermal barrier coatings towards molten calcium-magnesium-alumina-silicate

(2019) Shiyu Sun et al.   CERAMICS INTERNATIONAL

Diffusion characteristics and structural stability of Pt modified β-NiAl/γ′-Ni3Al within NiCoCrAl alloy at high temperature

(2019) Asim Khan et al.   APPLIED SURFACE SCIENCE

Corrosion behavior of Sc2O3–Y2O3 co-stabilized ZrO2 thermal barrier coatings with CMAS attack

(2019) W. Fan et al.   CERAMICS INTERNATIONAL

CMAS corrosion resistance in high temperature and rainwater environment of double-layer thermal barrier coatings odified by rare earth

(2019) Tian-shun Dong et al.   CERAMICS INTERNATIONAL

Wetting mechanism of CMAS melt on YSZ surface at high temperature: First-principles calculation

(2019) Bingtian Li et al.   APPLIED SURFACE SCIENCE

Corrosion resistance and thermal-mechanical properties of ceramic pellets to molten calcium-magnesium-alumina-silicate (CMAS)

(2019) Huanjie Fang et al.   CERAMICS INTERNATIONAL

CMAS resistance characteristics of LaPO4/YSZ thermal barrier coatings at 1250°C–1350°C

(2019) Lei Guo et al.   CORROSION SCIENCE

CMAS penetration-induced cracking behavior in the ceramic top coat of APS TBCs

(2019) Zhenwei Cai et al.   CERAMICS INTERNATIONAL

Hot corrosion behavior and wettability of calcium–magnesium–alumina–silicate (CMAS) on LaTi2Al9O19 ceramic

(2019) Weiwei Qu et al.   CORROSION SCIENCE

Investigation of ternary rare earth oxide-doped YSZ and its high temperature stability

(2019) Dong Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of rare earth oxides on kinetics and reaction mechanisms in CMAS silicate melts

(2019) F. Perrudin et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

The corrosion behaviors of thermal barrier material of M-YTaO4 attacked by CMAS at 1250 °C

(2019) Wenqi Yang et al.   CERAMICS INTERNATIONAL

Hot corrosion behavior of BaLa 2 Ti 3 O 10 exposed to calcium-magnesium-alumina-silicate at elevated temperatures

(2018) Jianxing Yu et al.   CERAMICS INTERNATIONAL

CMAS (CaO–MgO–Al 2 O 3 –SiO 2 ) resistance of Y 2 O 3 -stabilized ZrO 2 thermal barrier coatings with Pt layers

(2018) Hui Liu et al.   CERAMICS INTERNATIONAL

Phase stability and thermo-physical properties of ZrO 2 -CeO 2 -TiO 2 ceramics for thermal barrier coatings

(2018) Jinshuang Wang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Environmental-barrier coating ceramics for resistance against attack by molten calcia-magnesia-aluminosilicate (CMAS) glass: Part II, β-Yb 2 Si 2 O 7 and β-Sc 2 Si 2 O 7

(2018) Laura R. Turcer et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Layered, composite, and doped thermal barrier coatings exposed to sand laden flows within a gas turbine engine: Microstructural evolution, mechanical properties, and CMAS deposition

(2018) Andy Nieto et al.   SURFACE & COATINGS TECHNOLOGY

Defects/CMAS corrosion resistance relationship in plasma sprayed YPSZ coating

(2017) Y.X. Kang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Resistance of 2ZrO2 ·Y2 O3 top coat in thermal/environmental barrier coatings to calcia-magnesia-aluminosilicate attack at 1500°C

(2017) Amanda R. Krause et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Plasma sprayed nanostructured GdPO4 thermal barrier coatings: Preparation microstructure and CMAS corrosion resistance

(2017) Lei Guo et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Lifetime and failure modes of plasma sprayed thermal barrier coatings in thermal gradient rig tests with simultaneous CMAS injection

(2017) Daniel E. Mack et al.   SURFACE & COATINGS TECHNOLOGY

CMAS behavior of yttrium aluminum garnet (YAG) and yttria-stabilized zirconia (YSZ) thermal barrier coatings

(2017) Rishi Kumar et al.   SURFACE & COATINGS TECHNOLOGY

Thermal cycling behavior and bonding strength of single-ceramic-layer Sm 2 Zr 2 O 7 and double-ceramic-layer Sm 2 Zr 2 O 7 /8YSZ thermal barrier coatings deposited by atmospheric plasma spraying

(2016) H.X. Wu et al.   CERAMICS INTERNATIONAL

Adsorbability and spreadability of calcium-magnesium-alumino-silicate (CMAS) on Al-modified 7YSZ thermal barrier coating

(2016) X.F. Zhang et al.   CERAMICS INTERNATIONAL

Stability, chemical bonding behavior, elastic properties and lattice thermal conductivity of molybdenum and tungsten borides under hydrostatic pressure

(2016) XiaoYu Chong et al.   CERAMICS INTERNATIONAL

Protectiveness of Pt and Gd2Zr2O7 layers on EB-PVD YSZ thermal barrier coatings against calcium–magnesium–alumina–silicate (CMAS) attack

(2015) Lu Wang et al.   CERAMICS INTERNATIONAL

Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection

(2015) Tao Liu et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

Oxygen vacancy induced carbon deposition at the triple phase boundary of the nickel/yttrium-stabilized zirconia (YSZ) interface

(2014) Yanxing Zhang et al.   JOURNAL OF POWER SOURCES

2ZrO2·Y2O3Thermal Barrier Coatings Resistant to Degradation by Molten CMAS: Part I, Optical Basicity Considerations and Processing

(2014) Amanda R. Krause et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Anisotropy in elasticity and thermal conductivity of monazite-type REPO4 (RE=La, Ce, Nd, Sm, Eu and Gd) from first-principles calculations

(2013) J. Feng et al.   ACTA MATERIALIA

Effect of processing and service conditions on the luminescence intensity of plasma sprayed (Tm3++Dy3+) co-doped YSZ coatings

(2013) Weize Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Composition effects of thermal barrier coating ceramics on their interaction with molten Ca–Mg–Al–silicate (CMAS) glass

(2012) Julie M. Drexler et al.   ACTA MATERIALIA

Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability, Thermo-physical Properties and Sintering of 8YSZ

(2012) Yanli ZHANG et al.   Chinese Journal of Aeronautics

Environmental degradation of thermal-barrier coatings by molten deposits

(2012) Carlos G. Levi et al.   MRS BULLETIN

Thermal conductivity of the gadolinium calcium silicate apatites: Effect of different point defect types

(2011) Zhixue Qu et al.   ACTA MATERIALIA

Jet Engine Coatings for Resisting Volcanic Ash Damage

(2011) Julie M. Drexler et al.   ADVANCED MATERIALS

A novel test approach for plasma-sprayed coatings tested simultaneously under CMAS and thermal gradient cycling conditions

(2010) Tanja Steinke et al.   SURFACE & COATINGS TECHNOLOGY

Thermal-gradient testing of thermal barrier coatings under simultaneous attack by molten glassy deposits and its mitigation

(2010) Julie M. Drexler et al.   SURFACE & COATINGS TECHNOLOGY

First-principles study of the relaxation and energy of bcc-Fe, fcc-Fe and AISI-304 stainless steel surfaces

(2009) Jun Yu et al.   APPLIED SURFACE SCIENCE

Infiltration-Inhibiting Reaction of Gadolinium Zirconate Thermal Barrier Coatings with CMAS Melts

(2008) Stephan Krämer et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY