In situ synchrotron computed tomography study of nanoscale interlaminar reinforcement and thin-ply effects on damage progression in composite laminates

Interlaminar to intralaminar mode I and II crack bifurcation due to aligned carbon nanotube reinforcement of aerospace-grade advanced composites

(2020) Xinchen Ni et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Static and fatigue interlaminar shear reinforcement in aligned carbon nanotube-reinforced hierarchical advanced composites

(2019) Xinchen Ni et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Particle-toughened interlayers enhance mechanical response of composite laminates

(2019) Minh Hoang Nguyen et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Failure behavior of notched CFRP laminates subjected to tensile load

(2019) Hiroshi Suemasu et al.   ADVANCED COMPOSITE MATERIALS

Mode I interlaminar fracture toughness of thin-ply laminates with CNT webs at the crack interface

(2019) Sofia Di Leonardo et al.   COMPOSITE STRUCTURES

Simulation of failure in laminated polymer composites: Building-block validation

(2019) C. Furtado et al.   COMPOSITE STRUCTURES

In situ observation of interactive failure modes in a single-edge notched symmetric cross-ply laminate using synchrotron X-ray tomography

(2019) Eonyeon Jo et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Ply thickness dependence of the intralaminar fracture in thin-ply carbon-epoxy laminates

(2018) G. Frossard et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

X-ray computed tomography of polymer composites

(2018) S.C. Garcea et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Advanced carbon fiber composite out-of-autoclave laminate manufacture via nanostructured out-of-oven conductive curing

(2018) Jeonyoon Lee et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Synergetic effects of thin plies and aligned carbon nanotube interlaminar reinforcement in composite laminates

(2018) Estelle Kalfon-Cohen et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Identification of failure modes of composite thin-ply laminates containing circular hole under tension by acoustic emission signals

(2018) Chunfang Huang et al.   COMPOSITE STRUCTURES

Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance

(2018) J. Cugnoni et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance

(2018) Mahoor Mehdikhani et al.   JOURNAL OF COMPOSITE MATERIALS

Improving damage resistance and load capacity of thin-ply laminates using ply clustering and small mismatch angles

(2018) A. Wagih et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The imaging of failure in structural materials by synchrotron radiation X-ray microtomography

(2017) S.C. Wu et al.   ENGINEERING FRACTURE MECHANICS

Three-dimensional deformation mapping of Mode I interlaminar crack extension in particle-toughened interlayers

(2016) G. Borstnar et al.   ACTA MATERIALIA

Selective ply-level hybridisation for improved notched response of composite laminates

(2016) C. Furtado et al.   COMPOSITE STRUCTURES

Using thin-plies to improve the damage resistance and tolerance of aeronautical CFRP composites

(2016) T.A. Sebaey et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Cure path dependency of mode I fracture toughness in thermoplastic particle interleaf toughened prepreg laminates

(2016) Chris Hunt et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness

(2016) G. Frossard et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

In-plane strength enhancement of laminated composites via aligned carbon nanotube interlaminar reinforcement

(2016) R. Guzman de Villoria et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Fibre failure assessment in carbon fibre reinforced polymers under fatigue loading by synchrotron X-ray computed tomography

(2016) S.C. Garcea et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Hierarchical lightweight composite materials for structural applications

(2016) Larissa Gorbatikh et al.   MRS BULLETIN

Use of microfasteners to produce damage tolerant composite structures

(2016) Ivana K. Partridge et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Initial damage induced by thermal residual stress and microscopic failure analysis of carbon-fiber reinforced composite under shear loading

(2015) Geng Han et al.   COMPOSITE INTERFACES

On crack initiation in notched, cross-plied polymer matrix composites

(2015) Q.D. Yang et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

An experimental investigation into size effects in quasi-isotropic carbon/epoxy laminates with sharp and blunt notches

(2014) Xiaodong Xu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Thin ply composites: Experimental characterization and modeling of size-effects

(2014) R. Amacher et al.   COMPOSITES SCIENCE AND TECHNOLOGY

In situtomographic investigation of damage development in ±45° carbon fibre reinforced laminates

(2014) F. Sket et al.   MATERIALS SCIENCE AND TECHNOLOGY

Environmental damage and degradation of FRP composites: A review report

(2014) Bankim Chandra Ray et al.   POLYMER COMPOSITES

An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface

(2013) Brian G. Falzon et al.   COMPOSITE STRUCTURES

Notched response of non-crimp fabric thin-ply laminates: Analysis methods

(2013) A. Arteiro et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Influence of voids on damage mechanisms in carbon/epoxy composites determined via high resolution computed tomography

(2013) A.E. Scott et al.   COMPOSITES SCIENCE AND TECHNOLOGY

A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements

(2012) G. Lubineau et al.   CARBON

Three-dimensional failure criteria for fiber-reinforced laminates

(2012) G. Catalanotti et al.   COMPOSITE STRUCTURES

Effect of stitch density and stitch thread thickness on damage progression and failure characteristics of stitched composites under out-of-plane loading

(2012) K.T. Tan et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing

(2011) J. LLorca et al.   ADVANCED MATERIALS

Improvement of tensile properties of CFRP composites under LEO space environment by applying MWNTs and thin-ply

(2011) Jin-Bum Moon et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

In situ fibre fracture measurement in carbon–epoxy laminates using high resolution computed tomography

(2011) A.E. Scott et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber—epoxy composites

(2011) Piyush R. Thakre et al.   JOURNAL OF COMPOSITE MATERIALS

Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings

(2010) Tomohiro Yokozeki et al.   COMPOSITE STRUCTURES

Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness

(2010) A. Turon et al.   COMPOSITE STRUCTURES

A review of recent research on mechanics of multifunctional composite materials and structures

(2010) Ronald F. Gibson   COMPOSITE STRUCTURES

High resolution tomographic imaging and modelling of notch tip damage in a laminated composite

(2010) P. Wright et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Matrix hybridization in the interlayer for carbon fiber reinforced composites

(2010) Vasileios M. Drakonakis et al.   POLYMER COMPOSITES

An experimental and numerical investigation into the damage mechanisms in notched composites

(2009) S.R. Hallett et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Scaling Effects in Notched Composites

(2009) M.R. Wisnom et al.   JOURNAL OF COMPOSITE MATERIALS

Joining prepreg composite interfaces with aligned carbon nanotubes

(2008) Enrique J. Garcia et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites

(2008) P. Wright et al.   JOURNAL OF COMPOSITE MATERIALS

Micromechanisms of damage in 0° splits in a [90/0]s composite material using synchrotron radiation computed tomography

(2008) A.J. Moffat et al.   SCRIPTA MATERIALIA

Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates

(2007) Tomohiro Yokozeki et al.   COMPOSITE STRUCTURES

Measuring the notched compressive strength of composite laminates: Specimen size effects

(2007) J. Lee et al.   COMPOSITES SCIENCE AND TECHNOLOGY