Application of porous metal foam heat exchangers and the implications of particulate fouling for energy-intensive industries
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Application of porous metal foam heat exchangers and the implications of particulate fouling for energy-intensive industries
Authors
Keywords
Metal foams, Heat exchanger fouling, Heat and mass transfer, Multiphase flows, CFD-DEM
Journal
CHEMICAL ENGINEERING SCIENCE
Volume 228, Issue -, Pages 115968
Publisher
Elsevier BV
Online
2020-07-17
DOI
10.1016/j.ces.2020.115968
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Transient heat transfer and non-isothermal particle-laden gas flows through porous metal foams of differing structure
- (2019) S.T.W. Kuruneru et al. APPLIED THERMAL ENGINEERING
- Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling
- (2019) Jian Wang et al. APPLIED ENERGY
- Potentials of porous materials for energy management in heat exchangers – A comprehensive review
- (2019) Saman Rashidi et al. APPLIED ENERGY
- Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design
- (2018) Liang Gong et al. APPLIED THERMAL ENGINEERING
- Applying artificial neural networks for systematic estimation of degree of fouling in heat exchangers
- (2018) Ehsan Davoudi et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Coupled CFD-DEM simulation of oscillatory particle-laden fluid flow through a porous metal foam heat exchanger: Mitigation of particulate fouling
- (2018) Sahan T.W. Kuruneru et al. CHEMICAL ENGINEERING SCIENCE
- Emerging electrochemical and membrane-based systems to convert low-grade heat to electricity
- (2018) Mohammad Rahimi et al. Energy & Environmental Science
- Membrane distillation at the water-energy nexus: limits, opportunities, and challenges
- (2018) Akshay Deshmukh et al. Energy & Environmental Science
- Effect of porosity on heat transfer and pressure drop characteristics of wet air in hydrophobic metal foam under dehumidifying conditions
- (2018) Zhancheng Lai et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Natural convection in metal foam heat sinks with open slots
- (2018) Shangsheng Feng et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Partially metal foam wrapped tube bundle as a novel generation of air cooled heat exchangers
- (2018) N. Alvandifar et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Evaluation of metal foam based thermoelectric generators for automobile waste heat recovery
- (2018) K. Nithyanandam et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Optimization of thermal design of heat sinks: A review
- (2018) Hamdi E. Ahmed et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Thermohydraulics of a metal foam-filled annulus
- (2018) M.P. Orihuela et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Mean turbulence statistics in boundary layers over high-porosity foams
- (2018) Christoph Efstathiou et al. JOURNAL OF FLUID MECHANICS
- Modeling and analysis of dust and temperature effects on photovoltaic systems’ performance and optimal cleaning frequency: Jordan case study
- (2018) Bashar Hammad et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A review on the applications of nanofluids in solar energy field
- (2018) Khalil Khanafer et al. RENEWABLE ENERGY
- Numerical simulations of two-phase flow in open-cell metal foams with application to aero-engine separators
- (2018) Zhengwei Nie et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Flow measurements in microporous media using micro-particle image velocimetry
- (2018) Xianke Lu et al. Physical Review Fluids
- Effect of porous substrates on thermohydraulic performance enhancement of double layer microchannel heat sinks
- (2018) Ali Ghahremannezhad et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review on heat conduction, heat convection, thermal radiation and phase change heat transfer of nanofluids in porous media: Fundamentals and applications
- (2018) H.J. Xu et al. CHEMICAL ENGINEERING SCIENCE
- Particulate fouling assessment in membrane based air-to-air energy exchangers
- (2017) Amin Engarnevis et al. ENERGY AND BUILDINGS
- Performance evaluation of a flat-plate solar collector filled with porous metal foam: Experimental and numerical analysis
- (2017) S. Saedodin et al. ENERGY CONVERSION AND MANAGEMENT
- Experimental heat transfer and pressure drop in a metal-foam-filled tube heat exchanger
- (2017) Gholamreza Bamorovat Abadi et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Two- and four-way coupling of cohesive poly-disperse particulate foulants on a metal foam fibre immersed in quiescent fluid
- (2017) S.T.W. Kuruneru et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- A coupled finite volume & discrete element method to examine particulate foulant transport in metal foam heat exchangers
- (2017) Sahan T.W. Kuruneru et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Geometric Mean of Fin Efficiency and Effectiveness: A Parameter to Determine Optimum Length of Open-Cell Metal Foam Used as Extended Heat Transfer Surface
- (2017) Tisha Dixit et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Heat Transfer During High Temperature Gas Flow Through Metal Foam Heat Exchangers
- (2017) Pakeeza Hafeez et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Performance degradation of photovoltaic power system: Review on mitigation methods
- (2017) Wan Juzaili Jamil et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Organic flexible thermoelectric generators: from modeling, a roadmap towards applications
- (2017) D. Beretta et al. Sustainable Energy & Fuels
- Thermal energy storage and retrieval characteristics of a molten-salt latent heat thermal energy storage system
- (2016) P. Zhang et al. APPLIED ENERGY
- Numerical investigation of the temporal evolution of particulate fouling in metal foams for air-cooled heat exchangers
- (2016) Sahan Trushad Wickramasooriya Kuruneru et al. APPLIED ENERGY
- A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement
- (2016) P. Zhang et al. APPLIED ENERGY
- Prediction of air-side particulate fouling of HVAC&R heat exchangers
- (2016) Harshad V. Inamdar et al. APPLIED THERMAL ENGINEERING
- Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions
- (2016) Haitao Hu et al. APPLIED THERMAL ENGINEERING
- Fouling and Scaling in Desalination
- (2016) Mohamed Khayet DESALINATION
- The effect of the gas–solid contacting pattern in a high-temperature thermochemical energy storage on the performance of a concentrated solar power plant
- (2016) S. Ströhle et al. Energy & Environmental Science
- Performance enhancement of thermoelectric waste heat recovery system by using metal foam inserts
- (2016) Tongcai Wang et al. ENERGY CONVERSION AND MANAGEMENT
- A Novel Experimental Method to Assess Particle Deposition in Idealized Porous Channels
- (2016) Sahan Trushad Wickramasooriya Kuruneru et al. HEAT TRANSFER ENGINEERING
- Numerical model of particle deposition on fin surface of heat exchanger
- (2016) Feilong Zhan et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Electronic cooling using water flow in aluminum metal foam heat sink: Experimental and numerical approach
- (2016) A.M. Bayomy et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Experimental study of porous media flow using hydro-gel beads and LED based PIV
- (2016) H M D Harshani et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Commercial Applications of Metal Foams: Their Properties and Production
- (2016) Francisco García-Moreno Materials
- Effects of heat enhancement for exhaust heat exchanger on the performance of thermoelectric generator
- (2015) Chi Lu et al. APPLIED THERMAL ENGINEERING
- Fouling in microstructured devices: a review
- (2015) M. Schoenitz et al. CHEMICAL COMMUNICATIONS
- Fouling Mitigation in Tubular Exchangers Using Various Projectiles: Deposit Removal Mechanisms
- (2015) Mohamed S. Abd-Elhady et al. CHEMICAL ENGINEERING & TECHNOLOGY
- An efficient 4 way coupling CFD–DEM model for dense gas–solid particulate flows simulations
- (2015) Philippe Traoré et al. COMPUTERS & FLUIDS
- A general framework for the assessment of solar fuel technologies
- (2015) Jeffrey A. Herron et al. Energy & Environmental Science
- Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials
- (2015) Baicun Wang et al. ENERGY CONVERSION AND MANAGEMENT
- High resolution X-ray microtomography-based CFD simulation for the characterization of flow permeability and effective thermal conductivity of aluminum metal foams
- (2015) Paola Ranut et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Effect of frequency on heat transfer due to oscillating water flow in open-cell metal foam: An experimental study
- (2015) Nihad Dukhan et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Comparison of metal foam heat exchangers to a finned heat exchanger for low Reynolds number applications
- (2015) Henk Huisseune et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam
- (2015) Shangsheng Feng et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical investigation of pressure drop and heat transfer through reconstructed metal foams and comparison against experiments
- (2015) Andrea Diani et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- An analytical consideration of steady-state forced convection within a nanofluid-saturated metal foam
- (2015) W. Zhang et al. JOURNAL OF FLUID MECHANICS
- Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam
- (2015) Shahabeddin K. Mohammadian et al. JOURNAL OF POWER SOURCES
- Analysis and Characterization of Metal Foam-Filled Double-Pipe Heat Exchangers
- (2015) Xi Chen et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Waste heat recovery through plate heat exchanger based thermoelectric generator system
- (2014) Tongcai Wang et al. APPLIED ENERGY
- Performance evaluation of single tubular aluminium foam heat exchangers
- (2014) A. Chumpia et al. APPLIED THERMAL ENGINEERING
- A Comprehensive Review of Milk Fouling on Heated Surfaces
- (2014) E. Sadeghinezhad et al. CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION
- Drivers of rising global energy demand: The importance of spatial lag and error dependence
- (2014) Yongfu Huang ENERGY
- Particle size distribution effects on preferential deposition areas in metal foam wrapped tube bundle
- (2014) E. Sauret et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- An experimental and numerical study of finned metal foam heat sinks under impinging air jet cooling
- (2014) S.S. Feng et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Improvement of the mechanical and thermal characteristics of open cell aluminum foams by the electrodeposition of Cu
- (2014) A. Antenucci et al. MATERIALS & DESIGN
- Membrane processes for heating, ventilation, and air conditioning
- (2014) Jason Woods RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Energy yield loss caused by dust deposition on photovoltaic panels
- (2014) Arash Sayyah et al. SOLAR ENERGY
- Energy efficiency improvement potentials and a low energy demand scenario for the global industrial sector
- (2014) Katerina Kermeli et al. Energy Efficiency
- $ per W metrics for thermoelectric power generation: beyond ZT
- (2013) Shannon K. Yee et al. Energy & Environmental Science
- Influence of cleaning using water and surfactants on the performance of photovoltaic panels
- (2013) K.A. Moharram et al. ENERGY CONVERSION AND MANAGEMENT
- A review of membrane-based air dehumidification
- (2013) Bo Yang et al. INDOOR AND BUILT ENVIRONMENT
- An experimental study on the heat dissipation of LED lighting module using metal/carbon foam
- (2013) Kai-Shing Yang et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Thermal Performance Enhancement of Microchannel Heat Sinks with Sintered Porous Media
- (2013) Tu-Chieh Hung et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Towards a description of particulate fouling: From single particle deposition to clogging
- (2012) Christophe Henry et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams
- (2012) P. Wang et al. APPLIED ENERGY
- Performances of two heat exchangers assisted by ultrasound
- (2012) M. Legay et al. APPLIED THERMAL ENGINEERING
- Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchanger
- (2012) Sven De Schampheleire et al. APPLIED THERMAL ENGINEERING
- Opportunities for low-grade heat recovery in the UK food processing industry
- (2012) Richard Law et al. APPLIED THERMAL ENGINEERING
- The impact of crystallization fouling on a microscale heat exchanger
- (2012) Moriz Mayer et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Experimental investigations of fouling reduction in an ultrasonically-assisted heat exchanger
- (2012) M. Legay et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
- (2012) Xiao-Hong Han et al. HEAT TRANSFER ENGINEERING
- Analysis of heat transfer in oscillating flow through a channel filled with metal foam using computational fluid dynamics
- (2012) Mohsen Ghafarian et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Impact of Particulate Deposition on the Thermohydraulic Performance of Metal Foam Heat Exchangers: A Simplified Theoretical Model
- (2012) K. Hooman et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Low grade thermal energy sources and uses from the process industry in the UK
- (2011) Yasmine Ammar et al. APPLIED ENERGY
- Technologies and trends in solar power and fuels
- (2011) Martin Roeb et al. Energy & Environmental Science
- Experimental investigation of thermal performance of aluminum finned heat exchangers and open-cell aluminum foam heat exchangers
- (2011) A.A. Sertkaya et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- A Comparison of Metal-Foam Heat Exchangers to Compact Multilouver Designs for Air-Side Heat Transfer Applications
- (2011) Z. Dai et al. HEAT TRANSFER ENGINEERING
- Design of Complex Structured Monolithic Heat Sinks for Enhanced Air Cooling
- (2011) Shankar Krishnan et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Air-side particulate fouling of microchannel heat exchangers: Experimental comparison of air-side pressure drop and heat transfer with plate-fin heat exchanger
- (2010) Ian H. Bell et al. APPLIED THERMAL ENGINEERING
- Heat Exchanger Fouling: Mitigation and Cleaning Strategies
- (2010) H. Müller-Steinhagen et al. HEAT TRANSFER ENGINEERING
- Virtual motion of real particles
- (2010) G. TRYGGVASON JOURNAL OF FLUID MECHANICS
- Impact of dust on solar photovoltaic (PV) performance: Research status, challenges and recommendations
- (2010) Monto Mani et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Seasonal effect of dust deposition on a field of evacuated tube collectors on the performance of a solar desalination plant
- (2009) Ali M. El-Nashar DESALINATION
- Heat Exchanger Fouling: Environmental Impacts
- (2009) H. Müller-Steinhagen et al. HEAT TRANSFER ENGINEERING
- Thermal analysis and optimization of multiple LED packaging based on a general analytical solution
- (2009) Ting Cheng et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- High recovery of concentrated RO brines using forward osmosis and membrane distillation
- (2009) C. Riziero Martinetti et al. JOURNAL OF MEMBRANE SCIENCE
- A synthesis of fluid and thermal transport models for metal foam heat exchangers
- (2008) Shadi Mahjoob et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A novel split-dimple interrupted fin configuration for heat transfer augmentation
- (2008) Mohammad A. Elyyan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Flow in porous metallic materials: A magnetic resonance imaging study
- (2008) Shoujun Xu et al. JOURNAL OF MAGNETIC RESONANCE IMAGING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now