Effect of flow behavior and process-induced variations on shape stability of 3D printed elements – A review
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effect of flow behavior and process-induced variations on shape stability of 3D printed elements – A review
Authors
Keywords
3D printing, Extrusion, Process-induced variations, Pumping, Shape stability
Journal
CEMENT & CONCRETE COMPOSITES
Volume -, Issue -, Pages 103952
Publisher
Elsevier BV
Online
2021-01-22
DOI
10.1016/j.cemconcomp.2021.103952
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- A process classification framework for defining and describing Digital Fabrication with Concrete
- (2020) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
- (2020) Sooraj A.O. Nair et al. CEMENT & CONCRETE COMPOSITES
- Elastic buckling and plastic collapse during 3D concrete printing
- (2020) A.S.J. Suiker et al. CEMENT AND CONCRETE RESEARCH
- Rheological and harden properties of the high-thixotropy 3D printing concrete
- (2019) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
- (2019) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates
- (2019) Joseph Ingaglio et al. CONSTRUCTION AND BUILDING MATERIALS
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- A review of the current progress and application of 3D printed concrete
- (2019) Jingchuan Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- How much is bulk concrete sheared during pumping?
- (2019) Dimitri Feys CONSTRUCTION AND BUILDING MATERIALS
- Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
- (2019) Binrong Zhu et al. MATERIALS & DESIGN
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- A self-reinforced cementitious composite for building-scale 3D printing
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- Changes in concrete properties during pumping and formation of lubricating material under pressure
- (2018) Egor Secrieru et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
- (2018) Sarah Al-Qutaifi et al. CONSTRUCTION AND BUILDING MATERIALS
- Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
- (2018) A.S.J. Suiker INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Concrete pumping and its effect on the air void system
- (2018) Jan Vosahlik et al. MATERIALS AND STRUCTURES
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Feasibility of using cellulose filaments as a viscosity modifying agent in self-consolidating concrete
- (2018) Ousmane A. Hisseine et al. CEMENT & CONCRETE COMPOSITES
- A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing
- (2018) Zhu Ding et al. Materials
- Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement Paste
- (2018) Mingxu Chen et al. Materials
- Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
- (2018) Zhixin Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of concrete mixtures for additive construction
- (2017) Todd S. Rushing et al. RAPID PROTOTYPING JOURNAL
- How do concrete rheology, tribology, flow rate and pipe radius influence pumping pressure?
- (2016) Dimitri Feys et al. CEMENT & CONCRETE COMPOSITES
- Changes in rheology of self-consolidating concrete induced by pumping
- (2016) Dimitri Feys et al. MATERIALS AND STRUCTURES
- Viscoelastic Properties of Fresh Cement Paste to Study the Flow Behavior
- (2016) Myoungsung Choi et al. International Journal of Concrete Structures and Materials
- Method of formulating geopolymer for 3D printing for construction applications
- (2016) Ming Xia et al. MATERIALS & DESIGN
- Prediction of pumping pressure by means of new tribometer for highly-workable concrete
- (2015) Dimitri Feys et al. CEMENT & CONCRETE COMPOSITES
- Understanding the Filler Effect on the Nucleation and Growth of C-S-H
- (2014) E. Berodier et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Cement paste prior to setting: A rheological approach
- (2013) Maurizio Bellotto CEMENT AND CONCRETE RESEARCH
- Lubrication layer properties during concrete pumping
- (2013) Myoungsung Choi et al. CEMENT AND CONCRETE RESEARCH
- Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes
- (2013) H. Khelifi et al. POWDER TECHNOLOGY
- Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids
- (2012) J. Spangenberg et al. CEMENT AND CONCRETE RESEARCH
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
- (2012) Arnoud Perrot et al. RHEOLOGICA ACTA
- Rheology as a tool in concrete science: The use of rheographs and workability boxes
- (2011) Olafur Haraldsson Wallevik et al. CEMENT AND CONCRETE RESEARCH
- Cement-based mixes: Shearing properties and pore pressure
- (2011) Thibaut Lecompte et al. CEMENT AND CONCRETE RESEARCH
- The origins of thixotropy of fresh cement pastes
- (2011) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- 3D Printing of cement composites
- (2009) G. Gibbons Advances in Applied Ceramics
- Effect of temperature on the rheology of flowable mortars
- (2009) Jean-Yves Petit et al. CEMENT & CONCRETE COMPOSITES
- Rheological behavior of mortars under different squeezing rates
- (2009) Fábio A. Cardoso et al. CEMENT AND CONCRETE RESEARCH
- Steady state flow of cement suspensions: A micromechanical state of the art
- (2009) Nicolas Roussel et al. CEMENT AND CONCRETE RESEARCH
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- From ordinary rhelogy concrete to self compacting concrete: A transition between frictional and hydrodynamic interactions
- (2008) Joumana Yammine et al. CEMENT AND CONCRETE RESEARCH
- Rheological properties of cement paste: Thixotropic behavior and structural breakdown
- (2008) Jon Elvar Wallevik CEMENT AND CONCRETE RESEARCH
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now