Development of cathode cooling fins with a multi-hole structure for open-cathode polymer electrolyte membrane fuel cells

Improving open-cathode polymer electrolyte membrane fuel cell performance using multi-hole separators

(2020) Kyung Don Baik et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Experimental and theoretical study on improving the operating characteristics of an open-cathode PEMFC stack by generating periodic disturbances at anode

(2019) Jing Zhao et al.   ENERGY CONVERSION AND MANAGEMENT

Advances in proton exchange membrane fuel cell with dead-end anode operation: A review

(2019) Jundika C. Kurnia et al.   APPLIED ENERGY

Effect of multi-hole flow field structure on the performance of H2/O2 polymer electrolyte membrane fuel cells

(2019) Kyung Don Baik et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

A critical review on unmanned aerial vehicles power supply and energy management: Solutions, strategies, and prospects

(2019) Mohamed Nadir Boukoberine et al.   APPLIED ENERGY

Metallic bipolar plate with a multi-hole structure in the rib regions for polymer electrolyte membrane fuel cells

(2018) Kyung Don Baik et al.   APPLIED ENERGY

Development of a polymer electrolyte fuel cell dead-ended anode purge strategy for use with a nitrogen-containing hydrogen gas supply

(2017) Tonny I. Okedi et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

An experimental and simulation study of novel channel designs for open-cathode high-temperature polymer electrolyte membrane fuel cells

(2016) Sobi Thomas et al.   APPLIED ENERGY

In-situ electrochemically active surface area evaluation of an open-cathode polymer electrolyte membrane fuel cell stack

(2016) Sergio Torija et al.   JOURNAL OF POWER SOURCES

Electro-thermal impedance spectroscopy applied to an open-cathode polymer electrolyte fuel cell

(2016) Erik Engebretsen et al.   JOURNAL OF POWER SOURCES

Water management in a planar air-breathing fuel cell array using operando neutron imaging

(2016) E. Coz et al.   JOURNAL OF POWER SOURCES

Anode purge strategy optimization of the polymer electrode membrane fuel cell system under the dead-end anode operation

(2016) Zhe Hu et al.   JOURNAL OF POWER SOURCES

The Hydro-electro-thermal Performance of Air-cooled, Open-cathode Polymer Electrolyte Fuel Cells: Combined Localised Current Density, Temperature and Water Mapping

(2015) Quentin Meyer et al.   ELECTROCHIMICA ACTA

System-level electro-thermal optimisation of air-cooled open-cathode polymer electrolyte fuel cells: Air blower parasitic load and schemes for dynamic operation

(2015) Quentin Meyer et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Study of water accumulation dynamics in the channels of an open-cathode fuel cell through electro-thermal characterisation and droplet visualisation

(2015) Oluwamayowa A. Obeisun et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions

(2015) Q. Meyer et al.   JOURNAL OF POWER SOURCES

Experimental and numerical modeling study of the electrical resistance of gas diffusion layer-less polymer electrolyte membrane fuel cells

(2015) Shiro Tanaka et al.   JOURNAL OF POWER SOURCES

Optimisation of air cooled, open-cathode fuel cells: Current of lowest resistance and electro-thermal performance mapping

(2015) Quentin Meyer et al.   JOURNAL OF POWER SOURCES

An efficient mathematical model for air-breathing PEM fuel cells

(2014) M.S. Ismail et al.   APPLIED ENERGY

Development of open-cathode polymer electrolyte fuel cells using printed circuit board flow-field plates: Flow geometry characterisation

(2014) Oluwamayowa A. Obeisun et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Corrugated mesh flow channel and novel microporous layers for reducing flooding and resistance in gas diffusion layer-less polymer electrolyte fuel cells

(2014) Shiro Tanaka et al.   JOURNAL OF POWER SOURCES

A portable system powered with hydrogen and one single air-breathing PEM fuel cell

(2013) J. Fernández-Moreno et al.   APPLIED ENERGY

Thermal modelling of the cathode in air-breathing PEM fuel cells

(2013) M.S. Ismail et al.   APPLIED ENERGY

Ultra-high current density water management in polymer electrolyte fuel cell with porous metallic flow field

(2013) A.K. Srouji et al.   JOURNAL OF POWER SOURCES

Dead-ended anode polymer electrolyte fuel cell stack operation investigated using electrochemical impedance spectroscopy, off-gas analysis and thermal imaging

(2013) Quentin Meyer et al.   JOURNAL OF POWER SOURCES

Vertically aligned carbon nanotube electrodes for high current density operating proton exchange membrane fuel cells

(2013) Shigeaki Murata et al.   JOURNAL OF POWER SOURCES

Air-breathing membraneless laminar flow-based fuel cells: Do they breathe enough oxygen?

(2012) Jin Xuan et al.   APPLIED ENERGY

Thermal analysis of air-cooled PEM fuel cells

(2012) Setareh Shahsavari et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Performance and mass transport in open metallic element architecture fuel cells at ultra-high current density

(2012) A.K. Srouji et al.   JOURNAL OF POWER SOURCES

A sizing-design methodology for hybrid fuel cell power systems and its application to an unmanned underwater vehicle

(2010) Q. Cai et al.   JOURNAL OF POWER SOURCES