Oxidation‐Resistant Environmental Barrier Coatings for Mo‐Based Alloys: A Review

Polymer derived ceramic materials from Si, B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection

(2019) Iryna Smokovych et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Processing of Mo silicide powders as filler particles in polymer-derived ceramic coatings for Mo-Si-B substrates

(2019) M. Krüger et al.   POWDER TECHNOLOGY

Tailored Oxidation Barrier Coatings for Mo-Hf-B and Mo-Zr-B Alloys

(2019) Iryna Smokovych et al.   Materials

Growth kinetics and isothermal oxidation behavior of a Si pack cementation-coated Mo-Si-B alloy

(2019) Kwangsu Choi et al.   APPLIED SURFACE SCIENCE

Passive filler loaded polysilazane‐derived glass/ceramic coating system applied to AISI 441 stainless steel, part 1: Processing and characterization

(2019) Ivana Petríková et al.   International Journal of Applied Ceramic Technology

Environmental Barrier Coatings Made by Different Thermal Spray Technologies

(2019) Robert Vaßen et al.   Coatings

Polysilazane-Type Coatings on Mo-Si-B Alloys: A Thermodynamic Assessment of the Phase Composition

(2018) Iryna Smokovych et al.   ADVANCED ENGINEERING MATERIALS

High temperature environmental resistant Mo-Si-B based coatings

(2018) J.H. Perepezko   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Microstructure and oxidation resistance of a multiphase Mo-Si-B ceramic coating on Mo substrates deposited by a plasma transferred arc process

(2018) Xinke Deng et al.   CERAMICS INTERNATIONAL

Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands

(2018) Andresa Baptista et al.   Coatings

Oxidation mechanism of W substituted Mo-Si-B alloys

(2017) Tuba Karahan et al.   INTERMETALLICS

High temperature oxidation and microstructure of MoSi 2 /MoB composite coating for Mo substrate

(2017) Yi Wang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Deposition and oxidation behavior of Mo(Si,Al) 2 /MoB layered coatings on TZM alloy

(2017) Ping Zhang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Polymer derived oxidation barrier coatings for Mo-Si-B alloys

(2017) Iryna Smokovych et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

PVD thermal barrier coating systems for Mo–Si–B alloys

(2017) A. Lange et al.   MATERIALS AT HIGH TEMPERATURES

Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 1650 °C

(2017) Zhenyang Cai et al.   SURFACE & COATINGS TECHNOLOGY

Near-Eutectic Ternary Mo-Si-B Alloys: Microstructures and Creep Properties

(2016) G. Hasemann et al.   JOM

The 2016 Thermal Spray Roadmap

(2016) Armelle Vardelle et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

Characterization of Oxidation Kinetics of Mo–Si–B-Based Materials

(2016) M. A. Azim et al.   OXIDATION OF METALS

Effect of filler on the oxidation protective ability of MoSi 2 coating for Mo substrate by halide activated pack cementation

(2016) Jia Sun et al.   MATERIALS & DESIGN

Preparation of agglomerated powders for air plasma spraying MoSi2 coating

(2015) Jian-hui Yan et al.   CERAMICS INTERNATIONAL

Properties of CMAS glass from desert sand

(2015) Narottam P. Bansal et al.   CERAMICS INTERNATIONAL

Oxidation behavior of (Mo,W)Si2–Si3N4 composite coating on molybdenum substrate at 1600°C

(2015) Houan Zhang et al.   CERAMICS INTERNATIONAL

Thermal expansion coefficient of single-crystal silicon from 7 K to 293 K

(2015) Thomas Middelmann et al.   PHYSICAL REVIEW B

Oxidation behavior of pack-cemented Si–B oxidation protection coatings for Mo–Si–B alloys at 1300°C

(2015) Annika Lange et al.   SURFACE & COATINGS TECHNOLOGY

Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process

(2014) Xiaodong Tian et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying

(2013) Yi Wang et al.   APPLIED SURFACE SCIENCE

Oxidation behavior of magnetron sputtered double layer coatings containing molybdenum, silicon and boron

(2013) A. Lange et al.   INTERMETALLICS

Correlation between microstructure and properties of fine grained Mo–Mo3Si–Mo5SiB2 alloys

(2013) M. Krüger et al.   INTERMETALLICS

Preparation and oxidation behavior of MoSi2–CrSi2–Si3N4 composite coating on Mo substrate

(2013) Houan Zhang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Preparation and characterization of MoSi2/MoB composite coating on Mo substrate

(2013) Yi Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Suppressing CMAS attack with a MoSiB-based coating

(2013) I.P. Downs et al.   SURFACE & COATINGS TECHNOLOGY

Slurry spray technique for manufacturing thermal barrier coatings

(2013) Phuc Nguyen et al.   Surface Innovations

Mo-Si-B Alloys for Ultrahigh-Temperature Structural Applications

(2012) J. A. Lemberg et al.   ADVANCED MATERIALS

Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy

(2012) S. Majumdar   SURFACE & COATINGS TECHNOLOGY

On the fracture toughness of fine-grained Mo-3Si-1B (wt.%) alloys at ambient to elevated (1300 °C) temperatures

(2011) Joseph A. Lemberg et al.   INTERMETALLICS

Oxidation behavior of Mo-Si-B-(X) alloys: Macro- and microalloying (X= Cr, Zr, La2O3)

(2011) S. Burk et al.   JOM

Effect of Thermal Annealing Upon Residual Stress and Mechanical Properties of Nanostructured TiSiN Coatings on Steel Substrates

(2011) Mohammad Shoeb Ahmed et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steel

(2011) Martin Günthner et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Thermodynamic assessment of the Nb–Si–Mo system

(2010) Tai Geng et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes

(2010) Xiaoai Fei et al.   CERAMICS INTERNATIONAL

Oxidation-resistant coatings for ultra-high-temperature refractory Mo-based alloys

(2010) J. H. Perepezko et al.   JOM

Stress Distributions in Plasma-Sprayed Thermal Barrier Coatings Under Thermal Cycling in a Temperature Gradient

(2010) Andi M. Limarga et al.   JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME

Development of silicide coating over molybdenum based refractory alloy and its characterization

(2010) S.P. Chakraborty et al.   JOURNAL OF NUCLEAR MATERIALS

Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics

(2010) Paolo Colombo et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Dip coating fabrication process for micro-tubular SOFCs

(2010) Alireza Torabi et al.   SOLID STATE IONICS

Transient oxidation of Mo–Si–B alloys: Effect of the microstructure size scale

(2009) F.A. Rioult et al.   ACTA MATERIALIA

Particle-Filled PHPS Silazane-Based Coatings on Steel

(2009) Martin Günthner et al.   International Journal of Applied Ceramic Technology

MoSi2 coating on Mo substrate for short-term oxidation protection in air

(2009) Md. Zafir Alam et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Hotter the Engine, the Better

(2009) J. H. Perepezko   SCIENCE

Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy

(2008) Zhihong Tang et al.   INTERMETALLICS

Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties

(2008) M. Krüger et al.   INTERMETALLICS

Oxidation Resistance Coatings of Mo-Si-B Alloys via a Pack Cementation Process

(2008) J. S. Park   METALS AND MATERIALS INTERNATIONAL