标题
Recent Development in Beta Titanium Alloys for Biomedical Applications
作者
关键词
-
出版物
Metals
Volume 10, Issue 9, Pages 1139
出版商
MDPI AG
发表日期
2020-08-24
DOI
10.3390/met10091139
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles
- (2020) Qiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced fatigue characteristics of a topology-optimized porous titanium structure produced by selective laser melting
- (2020) Y.J. Liu et al. Additive Manufacturing
- Wetting of graphite by molten Cu–xSn–yCr ternary alloys at 1373 K
- (2020) Qiaoli Lin et al. CARBON
- A study on the mechanical properties and corrosion behavior of the new as-cast TZNT alloys for biomedical applications
- (2020) Amir Zareidoost et al. Materials Science & Engineering C-Materials for Biological Applications
- Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys
- (2020) S.F. Jawed et al. Materials Science & Engineering C-Materials for Biological Applications
- Superelastic behavior of in-situ eutectic-reaction manufactured high strength 3D porous NiTi-Nb scaffold
- (2020) Shifeng Liu et al. SCRIPTA MATERIALIA
- Beta Titanium Alloys Produced from Titanium Hydride: Effect of Alloying Elements on Titanium Hydride Decomposition
- (2020) Caterina Chirico et al. Metals
- The evolution of microstructure and electrical performance in doped Mn-Co and Cu-Mn oxide layers with the extended oxidation time
- (2020) P.Y. Guo et al. CORROSION SCIENCE
- Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development
- (2020) Hooyar Attar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of in-situ reinforced Ti–35Nb–5Ta–7Zr (TNTZ) alloy by selective electron beam melting (SEBM)
- (2020) Kun Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications
- (2020) Taekyung Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In situ fabrication of a titanium-niobium alloy with tailored microstructures, enhanced mechanical properties and biocompatibility by using selective laser melting
- (2020) Danlei Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of grain size on the recovery strain in a new Ti–20Zr–12Nb–2Sn superelastic alloy
- (2020) J.J. Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A 3D-Printed Ultra-Low Young’s Modulus β-Ti Alloy for Biomedical Applications
- (2020) Massimo Pellizzari et al. Materials
- Superelastic Behavior of Ti-Nb Alloys Obtained by the Laser Engineered Net Shaping (LENS) Technique
- (2020) Damian Kalita et al. Materials
- Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
- (2020) Shun-Xing Liang et al. Applied Materials Today
- A low-cost metastable beta Ti alloy with high elastic admissible strain and enhanced ductility for orthopaedic application
- (2020) Yidong Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, mechanical property and corrosion behavior of porous Ti–Ta–Nb–Zr
- (2020) B.Q. Li et al. Bioactive Materials
- Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
- (2020) Jincheng Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Mechanical Properties and the Microstructure of β Ti-35Nb-10Ta-xFe Alloys Obtained by Powder Metallurgy for Biomedical Applications
- (2019) Angélica Amigó et al. Metals
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Novel β-Ti35Zr28Nb alloy scaffolds manufactured using selective laser melting for bone implant applications
- (2019) Yuncang Li et al. Acta Biomaterialia
- Effects of laser surface alloying with Cr on microstructure and hardness of commercial purity Zr
- (2019) Ke Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Effect of EBM Process Parameters on Porosity and Microstructure of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
- (2019) Tomasz Kurzynowski et al. SCANNING
- Microstructure evolution and electrochemical properties of TiO2/Ti-35Nb-2Ta-3Zr micro/nano-composites fabricated by friction stir processing
- (2019) Hao Gu et al. MATERIALS & DESIGN
- Deformation and strength characteristics of Laves phases in titanium alloys
- (2019) C.D. Rabadia et al. MATERIALS & DESIGN
- Mechanical behavior and phase transformation of β-type Ti-35Nb-2Ta-3Zr alloy fabricated by 3D-Printing
- (2019) Noman Hafeez et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical characterization and deformation behavior of β-stabilized Ti-Nb-Sn-Cr alloys
- (2019) S.F. Jawed et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of Ti–35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
- (2019) J.C. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coating
- (2019) Liang-Yu Chen et al. SURFACE & COATINGS TECHNOLOGY
- Near Net Shape Manufacture of Titanium Alloy Components from Powder and Wire: A Review of State-of-the-Art Process Routes
- (2019) Thomas Childerhouse et al. Metals
- Nanoindentation characterization on local plastic response of Ti-6Al-4V under high-load spherical indentation
- (2019) Yan Wen et al. Journal of Materials Research and Technology-JMR&T
- A comparative study on the nanoindentation behavior, wear resistance and in vitro biocompatibility of SLM manufactured CP–Ti and EBM manufactured Ti64 gyroid scaffolds
- (2019) Arash Ataee et al. Acta Biomaterialia
- Ultrahigh-performance TiNi shape memory alloy by 4D printing
- (2019) H.Z. Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A review of catalytic performance of metallic glasses in wastewater treatment: Recent progress and prospects
- (2019) Lai-Chang Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Calculation of Oxygen Diffusion Coefficients in Oxide Films Formed on Low-Temperature Annealed Zr Alloys and Their Related Corrosion Behavior
- (2019) Lina Zhang et al. Metals
- Design and fabrication of a (β+α") dual-phase Ti-Nb-Sn alloy with linear deformation behavior for biomedical applications
- (2019) Shun Guo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Simultaneously improved strength and toughness of in situ bi-phased TiB2–Ti(C,N)–Ni cermets by Mo addition
- (2019) Hong-Yu Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
- (2019) C.D. Rabadia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
- (2019) Bai-Xin Dong et al. MATERIALS & DESIGN
- Beta-type Ti-Nb-Zr-Cr alloys with large plasticity and significant strain hardening
- (2019) S.F. Jawed et al. MATERIALS & DESIGN
- Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests
- (2019) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- The effect and mechanism of alloying elements on Al/SiC interfacial reaction in Al melt
- (2019) Haotian Tong et al. APPLIED SURFACE SCIENCE
- Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti–20Zr–Mo alloys system for biomedical applications
- (2019) P.A.B. Kuroda et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and properties of equiatomic Ti–Ni alloy fabricated by selective laser melting
- (2019) D.C. Ren et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of Ti-35Nb-2Ta-3Zr Alloy by Laser Quenching
- (2019) Ting Zhang et al. Frontiers in Materials
- Microstructure evolution and superelasticity of layer-like NiTiNb porous metal prepared by eutectic reaction
- (2018) Liqiang Wang et al. ACTA MATERIALIA
- Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
- (2018) S. Zhao et al. ACTA MATERIALIA
- Porous Titanium Implants: A Review
- (2018) Krzysztof Pałka et al. ADVANCED ENGINEERING MATERIALS
- Corrosion behavior of non-equilibrium Zr-Sn-Nb-Fe-Cu-O alloys in high-temperature 0.01 M LiOH aqueous solution and degradation of the surface oxide films
- (2018) Liang-Yu Chen et al. CORROSION SCIENCE
- Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy
- (2018) Linjiang Chai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting
- (2018) Libo Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing
- (2018) Igor Polozov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermomechanical processing of a high strength metastable beta titanium alloy powder, consolidated using the low-cost FAST- forge process
- (2018) Emma Calvert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Synthesis of porous Ti–50Ta alloy by powder metallurgy
- (2018) Grzegorz Dercz et al. MATERIALS CHARACTERIZATION
- Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting
- (2018) Wei Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity
- (2018) C.D. Rabadia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting
- (2018) Y.J. Liu et al. SCRIPTA MATERIALIA
- Unmasking chloride attack on the passive film of metals
- (2018) B. Zhang et al. Nature Communications
- A Review of Metastable Beta Titanium Alloys
- (2018) R. Kolli et al. Metals
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials Science & Engineering
- Compelling Rejuvenated Catalytic Performance in Metallic Glasses
- (2018) Shun-Xing Liang et al. ADVANCED MATERIALS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality
- (2018) Swee Leong Sing et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Synthesis of biphasic calcium phosphate (BCP) coatings on β‒type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion
- (2018) Burak Dikici et al. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
- Effect of Ta addition on the microstructures and mechanical properties of in situ bi-phase (TiB2-TiCxNy)/(Ni-Ta) cermets
- (2018) Hong-Yu Yang et al. CERAMICS INTERNATIONAL
- Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment
- (2018) Ijlal Simsek et al. Materials Science & Engineering C-Materials for Biological Applications
- Phase interaction induced texture in a plasma sprayed-remelted NiCrBSi coating during solidification: An electron backscatter diffraction study
- (2018) Liang-Yu Chen et al. SURFACE & COATINGS TECHNOLOGY
- Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions
- (2017) Shima Ehtemam-Haghighi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Erosion-wear and intergranular corrosion resistance properties of AISI 304L austenitic stainless steel after low-temperature plasma nitriding
- (2017) Xujuan Qin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- FAST-forge − A new cost-effective hybrid processing route for consolidating titanium powder into near net shape forged components
- (2017) N.S. Weston et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
- (2017) Nianwei Dai et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy
- (2017) M. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- α→β Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy
- (2017) LinJiang Chai et al. Science China-Technological Sciences
- Microstructural evolution in a superelastic metastable beta-Ti alloy
- (2017) James Coakley et al. SCRIPTA MATERIALIA
- Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
- (2017) Takuya Ishimoto et al. SCRIPTA MATERIALIA
- Effects of solution treatment and aging on the microstructure, mechanical properties, and corrosion resistance of a β type Ti–Ta–Hf–Zr alloy
- (2017) Jixing Lin et al. RSC Advances
- Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
- (2017) Qian Wang et al. MATERIALS & DESIGN
- Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid
- (2016) Xueyuan Yang et al. Acta Biomaterialia
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Texture Development in Cold Deformed and Recrystallized Ti-30Nb-4Sn Alloy and Its Effects on Hardness and Young's Modulus
- (2016) Leonardo Fanton et al. ADVANCED ENGINEERING MATERIALS
- Effect of Rapid Solidification on Microstructure and Elastic Modulus of β Ti-x Nb-3Fe Alloys for Implant Applications
- (2016) Conrado R. M. Afonso et al. ADVANCED ENGINEERING MATERIALS
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- On the electropolishing and anodic oxidation of Ti-15Mo alloy
- (2016) Dorota Babilas et al. ELECTROCHIMICA ACTA
- Production of porous Ti5Al2.5Fe alloy via pressureless spark plasma sintering
- (2016) R. Yamanoglu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
- (2016) Swee Leong Sing et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain Boundary Character Distribution of TLM Titanium Alloy During Deformation
- (2016) X. F. Bai et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Characterization of the photoactivity of nanotube layers grown on Ti–35Nb and Ti–35Nb–4Sn alloys
- (2016) Nathalia Carolina Veríssimo et al. JOURNAL OF MATERIALS SCIENCE
- Electron Beam Melted Beta-type Ti–24Nb–4Zr–8Sn Porous Structures With High Strength-to-Modulus Ratio
- (2016) Yujing Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Orthorhombic martensite formation upon aging in a Ti-30Nb-4Sn alloy
- (2016) Camilo A.F. Salvador et al. MATERIALS CHEMISTRY AND PHYSICS
- Bioactive surface modification of Ti–29Nb–13Ta–4.6Zr alloy through alkali solution treatments
- (2016) E. Takematsu et al. Materials Science & Engineering C-Materials for Biological Applications
- Biocompatibility of new Ti–Nb–Ta base alloys
- (2016) Abdelrahman H. Hussein et al. Materials Science & Engineering C-Materials for Biological Applications
- In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
- (2016) M. Fischer et al. Materials Science & Engineering C-Materials for Biological Applications
- Development of a new β Ti alloy with low modulus and favorable plasticity for implant material
- (2016) S.X. Liang et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of Nb on the β → α″ martensitic phase transformation and properties of the newly designed Ti–Fe–Nb alloys
- (2016) Shima Ehtemam-Haghighi et al. Materials Science & Engineering C-Materials for Biological Applications
- Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder
- (2016) L.H. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shaped metal deposition technique in additive manufacturing: A review
- (2016) Oguzhan Yilmaz et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Surface treatment and its effect on the electrochemical behavior of Ti–15Mo–3Nb–3Al alloy
- (2016) R. V. Lakshmi et al. RSC Advances
- Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition
- (2016) Pedro Fernandes Santos et al. MATERIALS & DESIGN
- Evaluation of mechanical and wear properties of Ti xNb 7Fe alloys designed for biomedical applications
- (2016) S. Ehtemam-Haghighi et al. MATERIALS & DESIGN
- Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition
- (2016) Shima Ehtemam-Haghighi et al. MATERIALS & DESIGN
- Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires
- (2016) Liqiang Wang et al. Scientific Reports
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Zr–Sn–Nb–Fe–Si–O alloy for fuel cladding candidate: Processing, microstructure, corrosion resistance and tensile behavior
- (2015) Liangyu Chen et al. CORROSION SCIENCE
- Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys
- (2015) S. Ehtemam Haghighi et al. MATERIALS & DESIGN
- Comparative study of structure formation and mechanical behavior of age-hardened Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys
- (2015) K. Inaekyan et al. MATERIALS CHARACTERIZATION
- On the influence of space holder in the development of porous titanium implants: Mechanical, computational and biological evaluation
- (2015) S. Muñoz et al. MATERIALS CHARACTERIZATION
- Superelasticity, corrosion resistance and biocompatibility of the Ti–19Zr–10Nb–1Fe alloy
- (2015) Pengfei Xue et al. Materials Science & Engineering C-Materials for Biological Applications
- First principles theoretical investigations of low Young's modulus beta Ti–Nb and Ti–Nb–Zr alloys compositions for biomedical applications
- (2015) Rajamallu Karre et al. Materials Science & Engineering C-Materials for Biological Applications
- Metallic implant biomaterials
- (2015) Qizhi Chen et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Processing and properties of topologically optimised biomedical Ti–24Nb–4Zr–8Sn scaffolds manufactured by selective laser melting
- (2015) Y.J. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening
- (2015) Liqiang Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective Laser Melting of Ti-45Nb Alloy
- (2015) Holger Schwab et al. Metals
- Fabrication of nano-grained Ti–Nb–Zr biomaterials using spark plasma sintering
- (2015) M.A. Hussein et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Fabrication of Metallic Biomedical Scaffolds with the Space Holder Method: A Review
- (2014) Budi Arifvianto et al. Materials
- New Developments of Ti-Based Alloys for Biomedical Applications
- (2014) Yuhua Li et al. Materials
- Electrochemical properties, chemical composition and thickness of passive film formed on novel Ti–20Nb–10Zr–5Ta alloy
- (2013) Ingrid Milošev et al. ELECTROCHIMICA ACTA
- A new asymmetric Schiff base system as fluorescent chemosensor for Al3+ ion
- (2013) Reza Azadbakht et al. INORGANIC CHEMISTRY COMMUNICATIONS
- Effects of phase stability and processing on the mechanical properties of Ti–Nb based β Ti alloys
- (2013) Damon Kent et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy
- (2013) Xiaohua Min et al. SCRIPTA MATERIALIA
- Influence of Zr content on microstructure and mechanical properties of implant Ti–35Nb–4Sn–6Mo–xZr alloys
- (2013) Shi-juan DAI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A comparative study of the cytotoxicity and corrosion resistance of nickel–titanium and titanium–niobium shape memory alloys
- (2012) Rebecca E. McMahon et al. Acta Biomaterialia
- Development of new metallic alloys for biomedical applications
- (2012) Mitsuo Niinomi et al. Acta Biomaterialia
- Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti–15Mo–5Zr–3Al alloy single crystal
- (2012) S.-H. Lee et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biocompatibility of Ti-alloys for long-term implantation
- (2012) Mohamed Abdel-Hady Gepreel et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure, mechanical, and anticorrosive properties of a new Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements
- (2012) Monica Popa et al. METALS AND MATERIALS INTERNATIONAL
- On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
- (2012) Matthieu Marteleur et al. SCRIPTA MATERIALIA
- Electrochemical corrosion behavior of Ti–24Nb–4Zr–8Sn alloy in a simulated physiological environment
- (2011) Y. Bai et al. APPLIED SURFACE SCIENCE
- Corrosion behavior of β titanium alloys for biomedical applications
- (2011) M. Atapour et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural Characterization of a Prototype Titanium Alloy Structure Processed via Direct Laser Deposition (DLD)
- (2011) Daniel Clark et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Conventional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications
- (2011) Y. Torres et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Fabrication of biomedical Ti–35Nb–7Zr–5Ta alloys by mechanical alloying and spark plasma sintering
- (2011) L M Zou et al. POWDER METALLURGY
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- The effect of oxygen on α″ martensite and superelasticity in Ti–24Nb–4Zr–8Sn
- (2010) E.G. Obbard et al. ACTA MATERIALIA
- Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solution
- (2010) I. Cvijović-Alagić et al. CORROSION SCIENCE
- Gene expression of markers of osteogenic differentiation of human mesenchymal cells on collagen I-modified microrough titanium surfaces
- (2010) M. Morra et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Production of Ti–13Nb–13Zr alloy for surgical implants by powder metallurgy
- (2010) V. A. R. Henriques et al. JOURNAL OF MATERIALS SCIENCE
- Mechanical properties of low modulus ββ titanium alloys designed from the electronic approach
- (2010) P. Laheurte et al. Journal of the Mechanical Behavior of Biomedical Materials
- Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-β titanium alloy
- (2010) A. Carman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An electrochemical study on self-ordered nanoporous and nanotubular oxide on Ti–35Nb–5Ta–7Zr alloy for biomedical applications
- (2009) Viswanathan S. Saji et al. Acta Biomaterialia
- Porous TiNbZr alloy scaffolds for biomedical applications
- (2009) Xiaojian Wang et al. Acta Biomaterialia
- In vivo investigation of the inflammatory response against allylamine plasma polymer coated titanium implants in a rat model
- (2009) A. Hoene et al. Acta Biomaterialia
- High resolution transmission electron microscopy study of the hardening mechanism through phase separation in a β-Ti–35Nb–7Zr–5Ta alloy for implant applications
- (2009) Conrado R.M. Afonso et al. Acta Biomaterialia
- Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
- (2009) Amit Bandyopadhyay et al. Acta Biomaterialia
- In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25°C and 37°C
- (2009) V.A. Alves et al. CORROSION SCIENCE
- Electrochemical corrosion behaviour of nanotubular Ti–13Nb–13Zr alloy in Ringer’s solution
- (2009) Viswanathan S. Saji et al. CORROSION SCIENCE
- Electrochemical characterization of β-Ti alloy in Ringer's solution for implant application
- (2009) Satendra Kumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dehydrogenation characteristics of Ti- and Ni/Ti-catalyzed Mg hydrides
- (2009) H.B. Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Engineered porous metals for implants
- (2008) B. Vamsi Krishna et al. JOM
- Corrosion behavior of Ti–13Nb–13Zr alloy used as a biomaterial
- (2008) T.C. Niemeyer et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Processing, characterization, andin vitro/in vivoevaluations of powder metallurgy processed Ti-13Nb-13Zr alloys
- (2008) Marco C. Bottino et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Grain-refinement mechanisms in titanium alloys
- (2008) M.J. Bermingham et al. JOURNAL OF MATERIALS RESEARCH
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- In vitro apatite formation on chemically treated (P/M) Ti–13Nb–13Zr
- (2007) Frank A. Müller et al. DENTAL MATERIALS
- Pitting corrosion of Cu–Zr metallic glasses in hydrochloric acid solutions
- (2007) H.B. Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Isochronal sintering of the blended elemental Ti–35Nb alloy
- (2007) D.R. Santos et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Histomorphologic evaluation of Ti–13Nb–13Zr alloys processed via powder metallurgy. A study in rabbits
- (2006) M.C. Bottino et al. Materials Science & Engineering C-Materials for Biological Applications
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More