Additive Manufacturing of Functional Microarchitected Reactors for Energy, Environmental, and Biological Applications

Mechanical Metamaterials and Their Engineering Applications

(2019) James Utama Surjadi et al.   ADVANCED ENGINEERING MATERIALS

Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning

(2019) Martin P. de Beer et al.   Science Advances

Multimaterial 3D laser microprinting using an integrated microfluidic system

(2019) Frederik Mayer et al.   Science Advances

Volumetric additive manufacturing via tomographic reconstruction

(2019) Brett E. Kelly et al.   SCIENCE

High-Performance Materials for 3D Printing in Chemical Synthesis Applications

(2019) Frederik Kotz et al.   ADVANCED MATERIALS

Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces

(2019) Oraib Al‐Ketan et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

3D Printing of Freestanding Overhanging Structures Utilizing an In Situ Light Guide

(2019) Jongkyeong Lim et al.   Advanced Materials Technologies

Applying Neural-Network-Based Machine Learning to Additive Manufacturing: Current Applications, Challenges, and Future Perspectives

(2019) Xinbo Qi et al.   Engineering

3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications

(2019) Rui Li et al.   ACS Applied Materials & Interfaces

Additive Manufacturing of Precision Biomaterials

(2019) Elia A. Guzzi et al.   ADVANCED MATERIALS

High-Speed 3D Printing of Millimeter-Size Customized Aspheric Imaging Lenses with Sub 7 nm Surface Roughness

(2018) Xiangfan Chen et al.   ADVANCED MATERIALS

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

(2018) Cesar Parra-Cabrera et al.   CHEMICAL SOCIETY REVIEWS

Roll-to-roll fabrication of integrated PDMS–paper microfluidics for nucleic acid amplification

(2018) Jussi Hiltunen et al.   LAB ON A CHIP

Biofabrication: A Guide to Technology and Terminology

(2018) Lorenzo Moroni et al.   TRENDS IN BIOTECHNOLOGY

Engineered 3D-printed artificial axons

(2018) Daniela Espinosa-Hoyos et al.   Scientific Reports

Repeated roll-to-roll transfer of two-dimensional materials by electrochemical delamination

(2018) M. Hempel et al.   Nanoscale

Interconnected Microphysiological Systems for Quantitative Biology and Pharmacology Studies

(2018) Collin D. Edington et al.   Scientific Reports

Smart Machining Process Using Machine Learning: A Review and Perspective on Machining Industry

(2018) Dong-Hyeon Kim et al.   International Journal of Precision Engineering and Manufacturing-Green Technology

Additive manufacturing of complex micro-architected graphene aerogels

(2018) Ryan M. Hensleigh et al.   Materials Horizons

Review of 3D printable hydrogels and constructs

(2018) Huijun Li et al.   MATERIALS & DESIGN

Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing

(2018) Cheng Zhu et al.   Science Advances

Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies

(2018) Yuen-Shan Leung et al.   JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING

Polymeric composites for powder-based additive manufacturing: Materials and applications

(2018) Shangqin Yuan et al.   PROGRESS IN POLYMER SCIENCE

Roll-to-roll fabrication of touch-responsive cellulose photonic laminates

(2018) Hsin-Ling Liang et al.   Nature Communications

3D-Printed Conical Arrays of TiO2 Electrodes for Enhanced Photoelectrochemical Water Splitting

(2017) Chong-Yong Lee et al.   Advanced Energy Materials

Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review

(2017) Xiaocong Tian et al.   Advanced Energy Materials

Scale-up of a Luminescent Solar Concentrator-Based Photomicroreactor via Numbering-up

(2017) Fang Zhao et al.   ACS Sustainable Chemistry & Engineering

Additive Manufacturing: Unlocking the Evolution of Energy Materials

(2017) Adilet Zhakeyev et al.   Advanced Science

Optimizing Chemical Reactions with Deep Reinforcement Learning

(2017) Zhenpeng Zhou et al.   ACS Central Science

One-step volumetric additive manufacturing of complex polymer structures

(2017) Maxim Shusteff et al.   Science Advances

Design and 3D printing of a stainless steel reactor for continuous difluoromethylations using fluoroform

(2017) Bernhard Gutmann et al.   Reaction Chemistry & Engineering

Computationally designed lattices with tuned properties for tissue engineering using 3D printing

(2017) Paul F. Egan et al.   PLoS One

A Leaf-Inspired Luminescent Solar Concentrator for Energy-Efficient Continuous-Flow Photochemistry

(2016) Dario Cambié et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Topology Optimization for Architected Materials Design

(2016) Mikhail Osanov et al.   Annual Review of Materials Research

Architected Cellular Materials

(2016) Tobias A. Schaedler et al.   Annual Review of Materials Research

3D printing of a heterogeneous copper-based catalyst

(2016) Carmen R. Tubío et al.   JOURNAL OF CATALYSIS

3D-printing of transparent bio-microfluidic devices in PEG-DA

(2016) Arturo Urrios et al.   LAB ON A CHIP

3D printed microfluidic circuitry via multijet-based additive manufacturing

(2016) R. D. Sochol et al.   LAB ON A CHIP

High density 3D printed microfluidic valves, pumps, and multiplexers

(2016) Hua Gong et al.   LAB ON A CHIP

One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology

(2016) Hyungseok Lee et al.   LAB ON A CHIP

3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications

(2016) Alireza Ahmadian Yazdi et al.   Microfluidics and Nanofluidics

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

(2016) Johan U. Lind et al.   NATURE MATERIALS

Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion

(2016) Qiming Wang et al.   PHYSICAL REVIEW LETTERS

Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting

(2016) Xuanyi Ma et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Multiprocess 3D printing for increasing component functionality

(2016) E. MacDonald et al.   SCIENCE

Ultrafast laser processing of materials: from science to industry

(2016) Mangirdas Malinauskas et al.   Light-Science & Applications

From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift

(2016) Won-Shik Chu et al.   International Journal of Precision Engineering and Manufacturing-Green Technology

High efficiency integration of three-dimensional functional microdevices inside a microfluidic chip by using femtosecond laser multifoci parallel microfabrication

(2016) Bing Xu et al.   Scientific Reports

Multimaterial 4D Printing with Tailorable Shape Memory Polymers

(2016) Qi Ge et al.   Scientific Reports

Three-Dimensional Au Microlattices as Positive Electrodes for Li–O2 Batteries

(2015) Chen Xu et al.   ACS Nano

Scalable 3D Bicontinuous Fluid Networks: Polymer Heat Exchangers Toward Artificial Organs

(2015) Christopher S. Roper et al.   ADVANCED MATERIALS

Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system

(2015) Jaehyuk Chang et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Continuous liquid interface production of 3D objects

(2015) J. R. Tumbleston et al.   SCIENCE

Highly compressible 3D periodic graphene aerogel microlattices

(2015) Cheng Zhu et al.   Nature Communications

3D Printed High-Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale-Up

(2014) Philip J. Kitson et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture

(2014) Greig Chisholm et al.   Energy & Environmental Science

Bio-inspired flow field designs for polymer electrolyte membrane fuel cells

(2014) Nannan Guo et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Discrete elements for 3D microfluidics

(2014) Krisna C. Bhargava et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Three-dimensional printing of Hela cells for cervical tumor modelin vitro

(2014) Yu Zhao et al.   Biofabrication

3D Printing of Interdigitated Li-Ion Microbattery Architectures

(2013) Ke Sun et al.   ADVANCED MATERIALS

Design and additive manufacture for flow chemistry

(2013) Andrew J. Capel et al.   LAB ON A CHIP

High-Throughput Printing via Microvascular Multinozzle Arrays

(2012) Christopher J. Hansen et al.   ADVANCED MATERIALS

Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography

(2012) Robert Gauvin et al.   BIOMATERIALS

Integrated 3D-printed reactionware for chemical synthesis and analysis

(2012) Mark D. Symes et al.   Nature Chemistry

Topology optimized microbioreactors

(2010) Daniel Schäpper et al.   BIOTECHNOLOGY AND BIOENGINEERING

3D microfabricated bioreactor with capillaries

(2009) Chunguang Xia et al.   BIOMEDICAL MICRODEVICES

A Coupled DEM and CFD Simulation of Flow Field and Pressure Drop in Fixed Bed Reactor with Randomly Packed Catalyst Particles

(2009) Hua Bai et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Electrospun Nanofibrous Membranes: A Novel Solid Substrate for Microfluidic Immunoassays for HIV

(2008) Dayong Yang et al.   ADVANCED MATERIALS