A Comprehensive Experimental Study on Mechanical Behavior, Microstructure and Transport Properties of 3D-printed Rock Analogs
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A Comprehensive Experimental Study on Mechanical Behavior, Microstructure and Transport Properties of 3D-printed Rock Analogs
Authors
Keywords
-
Journal
Rock Mechanics and Rock Engineering
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2020-09-10
DOI
10.1007/s00603-020-02239-4
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Visualized Experiments on Residual Oil Classification and Its Influencing Factors in Waterflooding Using Micro-Computed Tomography
- (2020) Rui Song et al. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME
- Hydromechanical properties of 3D printed fractures with controlled surface roughness: Insights into shear-permeability coupling processes
- (2020) Takuya Ishibashi et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Experimental study of non-linear fluid flow though rough fracture based on fractal theory and 3D printing technique
- (2020) Peijie Yin et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Experimental Investigation of Dynamic Fracture Patterns of 3D Printed Rock-like Material Under Impact with Digital Image Correlation
- (2020) Mansour Sharafisafa et al. ROCK MECHANICS AND ROCK ENGINEERING
- Mechanical and Volumetric Fracturing Behaviour of Three-Dimensional Printing Rock-like Samples Under Dynamic Loading
- (2020) Tao Zhou et al. ROCK MECHANICS AND ROCK ENGINEERING
- Review of the Validity of the Use of Artificial Specimens for Characterizing the Mechanical Properties of Rocks
- (2019) Eleanor M. Gell et al. ROCK MECHANICS AND ROCK ENGINEERING
- Microstructure characteristics and fractal analysis of 3D-printed sandstone using micro-CT and SEM-EDS
- (2019) Lingyun Kong et al. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
- Experimental study of the prepeak cyclic shear mechanical behaviors of artificial rock joints with multiscale asperities
- (2019) Miaomiao Kou et al. SOIL DYNAMICS AND EARTHQUAKE ENGINEERING
- A New Way to Replicate the Highly Stressed Soft Rock: 3D Printing Exploration
- (2019) Zhijun Wu et al. ROCK MECHANICS AND ROCK ENGINEERING
- Mechanical Behavior of Cemented Sand Reinforced with Different Polymer Fibers
- (2019) Xiangfeng Lv et al. Advances in Materials Science and Engineering
- Pore scale investigation on scaling-up micro-macro capillary number and wettability on trapping and mobilization of residual fluid
- (2019) Yao Wang et al. JOURNAL OF CONTAMINANT HYDROLOGY
- Unstable failure of gas-bearing coal-rock combination bodies: Insights from physical experiments and numerical simulations
- (2019) Feng Du et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Comparative analysis on pore-scale permeability prediction on micro-CT images of rock using numerical and empirical approaches
- (2019) Rui Song et al. Energy Science & Engineering
- Quantification of continuous evolution of full-field stress associated with shear deformation of faults using three-dimensional printing and phase-shifting methods
- (2019) Yang Ju et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Three-dimensional printing for geoscience: Fundamental research, education, and applications for the petroleum industry
- (2018) Sergey Ishutov et al. AAPG BULLETIN
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Replication of internal defects and investigation of mechanical and fracture behaviour of rock using 3D printing and 3D numerical methods in combination with X-ray computerized tomography
- (2018) J.B. Zhu et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Investigation of pore structure and petrophysical property in tight sandstones
- (2018) Jin Lai et al. MARINE AND PETROLEUM GEOLOGY
- A review on challenges in the assessment of geomechanical rock performance for deep geothermal reservoir development
- (2018) Ingrid Tomac et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Feasibility Investigation of 3D Printing Technology for Geotechnical Physical Models: Study of Tunnels
- (2018) Leibo Song et al. ROCK MECHANICS AND ROCK ENGINEERING
- Can 3-D Printed Gypsum Samples Replicate Natural Rocks? An Experimental Study
- (2018) Lingyun Kong et al. ROCK MECHANICS AND ROCK ENGINEERING
- Visualization method for stress-field evolution during rapid crack propagation using 3D printing and photoelastic testing techniques
- (2018) Yang Ju et al. Scientific Reports
- Numerical and theoretical simulations of the dielectric properties of porous rocks
- (2018) Tongcheng Han et al. JOURNAL OF APPLIED GEOPHYSICS
- Volumetric fracturing behavior of 3D printed artificial rocks containing single and double 3D internal flaws under static uniaxial compression
- (2018) T. Zhou et al. ENGINEERING FRACTURE MECHANICS
- Wettability Measurements on 3D Printed Sandstone Analogues and Its Implications for Fluid Transport Phenomena
- (2018) N. Ardila et al. TRANSPORT IN POROUS MEDIA
- RETRACTED: The shale gas sorption capacity of transitional shales in the Ordos Basin, NW China
- (2017) Fengyang Xiong et al. FUEL
- A Pore Scale Flow Simulation of Reconstructed Model Based on the Micro Seepage Experiment
- (2017) Jianjun Liu et al. GEOFLUIDS
- A new method to reconstruct structured mesh model from micro-computed tomography images of porous media and its application
- (2017) Rui Song et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Investigation of foam flow in a 3D printed porous medium in the presence of oil
- (2017) Kofi Osei-Bonsu et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Identification of a Suitable 3D Printing Material for Mimicking Brittle and Hard Rocks and Its Brittleness Enhancements
- (2017) T. Zhou et al. ROCK MECHANICS AND ROCK ENGINEERING
- 3D Printed Sandstone Strength: Curing of Furfuryl Alcohol Resin-Based Sandstones
- (2017) Bauyrzhan Primkulov et al. 3D Printing and Additive Manufacturing
- Reverse modelling of natural rock joints using 3D scanning and 3D printing
- (2016) Quan Jiang et al. COMPUTERS AND GEOTECHNICS
- Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass
- (2016) Yong Li et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printable geomaterials
- (2016) D. A. H. Hanaor et al. GEOTECHNIQUE
- Novel 3D centimetre-to nano-scale quantification of an organic-rich mudstone: The Carboniferous Bowland Shale, Northern England
- (2016) Lin Ma et al. MARINE AND PETROLEUM GEOLOGY
- Applications of 3D printing in cardiovascular diseases
- (2016) Andreas A. Giannopoulos et al. Nature Reviews Cardiology
- Effect of saturated fluid on the failure mode of brittle gas shale
- (2016) Fanbao Meng et al. Journal of Natural Gas Science and Engineering
- 3D printing sandstone porosity models
- (2015) Sergey Ishutov et al. Interpretation-A Journal of Subsurface Characterization
- A Preliminary Study of 3D Printing on Rock Mechanics
- (2014) Chao Jiang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Investigation and conservation of artificial stone facades of the early XX century: A case study
- (2013) F. Fatiguso et al. CONSTRUCTION AND BUILDING MATERIALS
- Pore-scale imaging and modelling
- (2012) Martin J. Blunt et al. ADVANCES IN WATER RESOURCES
- Effects of mineral distribution at mesoscopic scale on solute diffusion in a clay-rich rock: Example of the Callovo-Oxfordian mudstone (Bure, France)
- (2012) Jean-Charles Robinet et al. WATER RESOURCES RESEARCH
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started