Kinetic Modeling of Nonmetallic Inclusions Behavior in Molten Steel: A Review
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Kinetic Modeling of Nonmetallic Inclusions Behavior in Molten Steel: A Review
Authors
Keywords
-
Journal
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2020-10-15
DOI
10.1007/s11663-020-01954-1
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Mechanism of Improving Heat-Affected Zone Toughness of Steel Plate with Mg Deoxidation after High-Heat-Input Welding
- (2020) Longyun Xu et al. Metals
- Mechanical Performance Improvement by Nitrogen Addition in N-CoCrNi Compositionally Complex Alloys
- (2020) Dennis Edgard Jodi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Prediction of Inclusion Evolution During Refining and Solidification of Steel: Computational Simulation and Experimental Confirmation
- (2020) Jae Hong Shin et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Prediction on the spatial distribution of the composition of inclusions in a heavy rail steel continuous casting bloom
- (2020) Qiang Ren et al. Journal of Materials Research and Technology-JMR&T
- Agglomeration of Solid Inclusions in Molten Steel
- (2019) Haojian Duan et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Fluid Flow, Thermal Stratification, and Inclusion Motion During Holding Period in Steel Ladles
- (2019) Haojian Duan et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A Kinetic Model of Mass Transfer and Chemical Reactions at a Steel/Slag Interface under Effect of Interfacial Tensions
- (2019) Peiyuan Ni et al. ISIJ INTERNATIONAL
- Evolution of Oxide Inclusions in Si-Mn-Killed Steel During Protective Atmosphere Electroslag Remelting
- (2019) Chengbin Shi et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Transformation of Inclusions in Linepipe Steels During Heat Treatment
- (2019) Yanping Chu et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Modeling of Turbulent Flow around Bubbles in Molten Steel
- (2019) Haojian Duan et al. STEEL RESEARCH INTERNATIONAL
- Effect of nitrogen on grain growth and formability of Ti-stabilized ferritic stainless steels
- (2019) Mun Hyung Lee et al. Scientific Reports
- Transformation of Inclusions in Solid GCr15 Bearing Steels During Heat Treatment
- (2019) Gong Cheng et al. Metals
- Influence of calcium aluminate flux on reoxidation behaviour of molten steel during continuous casting process
- (2019) Tae Sung Kim et al. IRONMAKING & STEELMAKING
- Precipitate behavior in nitrogen-containing CoCrNi medium-entropy alloys
- (2019) Dennis Edgard Jodi et al. MATERIALS CHARACTERIZATION
- Strengthening of ultrafine-grained equiatomic CoCrFeMnNi high-entropy alloy by nitrogen addition
- (2019) Dennis Edgard Jodi et al. MATERIALS LETTERS
- Investigation on the precipitate formation and behavior in nitrogen-containing equiatomic CoCrFeMnNi high-entropy alloy
- (2019) Dennis Edgard Jodi et al. MATERIALS LETTERS
- Formation and Deformation Mechanism of Al2O3-CaS Inclusions in Ca-Treated Non-Oriented Electrical Steels
- (2019) Qiang Ren et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Formation Mechanism of Large Inclusions in 80t 20Cr–8Ni Stainless Steel Casting for Nuclear Power
- (2019) Qiming Wang et al. STEEL RESEARCH INTERNATIONAL
- Effect of CaO/Al2O3 Ratio of Ladle Slag on Formation Behavior of Inclusions in Mn and V Alloyed Steel
- (2018) Jae Hong Shin et al. ISIJ INTERNATIONAL
- Characterization of non-metallic inclusions and their influence on the mechanical properties of a FCC single-phase high-entropy alloy
- (2018) N. Choi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Modeling reoxidation behavior of Al–Ti-containing steels by CaO–Al2O3–MgO–SiO2 slag
- (2018) Ying Ren et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Effect of CaF2 content in refining slag on formation behavior of spinel inclusion in Ni–Cr–V-alloyed special steel
- (2018) Jae-hong Shin et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Synergistic Effect of Nitrogen and Refractory Material on TiN Formation and Equiaxed Grain Structure of Ferritic Stainless Steel
- (2018) Mun Hyung Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Sulfur in Steel on Transient Evolution of Inclusions During Calcium Treatment
- (2018) Yang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Relationship Between Dissolved Calcium and Total Calcium in Al-Killed Steels After Calcium Treatment
- (2018) Yang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Transient Evolution of Nonmetallic Inclusions During Calcium Treatment of Molten Steel
- (2018) Lifeng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace
- (2018) Yousef Tabatabaei et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Oxide Inclusions on the Magnetic Properties of Non-Oriented Electrical Steel
- (2018) Qiang Ren et al. STEEL RESEARCH INTERNATIONAL
- A Kinetic Model on Oxygen Transfer at a Steel/Slag Interface under Effect of Interfacial Tension
- (2018) Peiyuan Ni et al. ISIJ INTERNATIONAL
- Large Eddy Simulation on the Fluid Flow, Solidification and Entrapment of Inclusions in the Steel Along the Full Continuous Casting Slab Strand
- (2018) Wei Chen et al. JOM
- A Kinetic Model for Modification of MgAl2O4 Spinel Inclusions During Calcium Treatment in the Ladle Furnace
- (2018) Yousef Tabatabaei et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Fluid Flow and Inclusion Behavior Around Spherical-Cap Bubbles
- (2018) Haojian Duan et al. JOM
- Rate of MgO Pickup in Alumina Inclusions in Aluminum-Killed Steel
- (2018) Deepoo Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Inclusion Capture Probability Prediction Model for Bubble Floatation in Turbulent Steel Flow
- (2018) Haojian Duan et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Initial agglomeration of non-wetted solid particles in high temperature melt
- (2018) Haojian Duan et al. CHEMICAL ENGINEERING SCIENCE
- Modelling inclusion evolution in Al–Ti-killed steels during ladle mixing process
- (2017) Ying Ren et al. IRONMAKING & STEELMAKING
- Thermodynamic Model for Prediction of Slag-Steel-Inclusion Reactions of 304 Stainless Steels
- (2017) Ying Ren et al. ISIJ INTERNATIONAL
- Effect of Slag Composition on MgO·Al2O3 Spinel-Type Inclusions in Molten Steel
- (2017) Akifumi Harada et al. ISIJ INTERNATIONAL
- Kinetics of Transformation of Al2O3 to MgO·Al2O3 Spinel Inclusions in Mg-Containing Steel
- (2017) Chunyang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Deformability of Oxide Inclusions in Tire Cord Steels
- (2017) Lifeng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Transformation of Oxide Inclusions in Type 304 Stainless Steels during Heat Treatment
- (2017) Ying Ren et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Atomic Cluster Aggregates in Nucleation of Solid Alumina Inclusion in the Aluminum Deoxidation for Liquid Iron
- (2017) Guocheng Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Evolution of Oxide Inclusions in Si-Mn Killed Steels During Hot-Rolling Process
- (2017) Wen Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A Multilayer Model for Alumina Inclusion Transformation by Calcium in the Ladle Furnace
- (2017) Yousef Tabatabaei et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Rice Husk Ash Insulation Powder on the Reoxidation Behavior of Molten Steel in Continuous Casting Tundish
- (2017) Tae Sung Kim et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Transformation of Inclusions in Pipeline Steels During Solidification and Cooling
- (2017) Wen Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Modification of Inclusions in Molten Steel by Mg-Ca Transfer from Top Slag: Experimental Confirmation of the ‘Refractory-Slag-Metal-Inclusion (ReSMI)’ Multiphase Reaction Model
- (2017) Jae Hong Shin et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Formation Mechanism of Oxide-Sulfide Complex Inclusions in High-Sulfur-Containing Steel Melts
- (2017) Jae Hong Shin et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A Reaction Model for Prediction of Inclusion Evolution During Reoxidation of Ca-Treated Al-Killed Steels in Tundish
- (2017) Ying Ren et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Evolution of Inclusions During the 1473 K (1200 °C) Heating Process of EH36 Shipbuilding Steel
- (2017) Qiyu Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Kinetic Modeling for the Dissolution of MgO Lining Refractory in Al-Killed Steels
- (2017) Fuxiang Huang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Inclusions in Stainless Steels − A Review
- (2017) Joo Hyun Park et al. STEEL RESEARCH INTERNATIONAL
- Modeling transient evolution of inclusion in Si-Mn-killed steels during the ladle mixing process
- (2017) Ying Zhang et al. Metallurgical Research & Technology
- Factors to Determine Inclusion Compositions in Molten Steel during the Secondary Refining Process of Case-Hardening Steel
- (2016) Takanori Yoshioka et al. ISIJ INTERNATIONAL
- Extraction, Thermodynamic Analysis, and Precipitation Mechanism of MnS-TiN Complex Inclusions in Low-Sulfur Steels
- (2016) Yang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Kinetic Ladle Furnace Process Simulation Model: Effective Equilibrium Reaction Zone Model Using FactSage Macro Processing
- (2016) Marie-Aline Van Ende et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Thermodynamics of Complex Sulfide Inclusion Formation in Ca-Treated Al-Killed Structural Steel
- (2016) Yin-tao Guo et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Modeling Manganese Silicate Inclusion Composition Changes during Ladle Treatment Using FactSage Macros
- (2016) Stephano P.T. Piva et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Refractory–Slag–Metal–Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel
- (2016) Jae Hong Shin et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Physicochemical Properties of Slag and Flux on the Removal Rate of Oxide Inclusion from Molten Steel
- (2016) Jun Seok Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Characterization of the Three-Dimensional Morphology and Formation Mechanism of Inclusions in Linepipe Steels
- (2016) Xuewei Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Mathematical Modeling on the Growth and Removal of Non-metallic Inclusions in the Molten Steel in a Two-Strand Continuous Casting Tundish
- (2016) Haitao Ling et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Investigation on the Effect of Nozzle Number on the Recirculation Rate and Mixing Time in the RH Process Using VOF + DPM Model
- (2016) Haitao Ling et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Attraction Force Estimations of Al2O3Particle Agglomerations in the Melt
- (2016) Changji Xuan et al. STEEL RESEARCH INTERNATIONAL
- Comparison of 2D and 3D morphology of non-metallic inclusions in steel using different methods
- (2016) Xuewei Zhang et al. Metallurgical Research & Technology
- Solidification and Particle Entrapment during Continuous Casting of Steel
- (2016) C. Pfeiler et al. STEEL RESEARCH INTERNATIONAL
- Influence of Refractory-Steel Interfacial Reaction on the Formation Behavior of Inclusions in Ce-containing Stainless Steel
- (2015) Sun Kuk Kwon et al. ISIJ INTERNATIONAL
- Inclusion Evolution during Modification of Alumina Inclusions by Calcium in Liquid Steel and Deformation during Hot Rolling Process
- (2015) Dongwei Zhao et al. ISIJ INTERNATIONAL
- Inclusion Modification in Si–Mn Killed Steels using Titanium Addition
- (2015) Vivek Thapliyal et al. ISIJ INTERNATIONAL
- Inclusion Evolution after Calcium Addition in Low Carbon Al-Killed Steel with Ultra Low Sulfur Content
- (2015) Guangwei Yang et al. ISIJ INTERNATIONAL
- Variation in the Chemical Driving Force for Intragranular Nucleation in the Multi-pass Weld Metal of Ti-Containing High-Strength Low-Alloy Steel
- (2015) Yongjoon Kang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Modeling and Measurements of Multiphase Flow and Bubble Entrapment in Steel Continuous Casting
- (2015) Kai Jin et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Morphology Control for Al2O3 Inclusion Without Ca Treatment in High-Aluminum Steel
- (2015) Shengping He et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Magnesia-Carbon Refractory on the Kinetics of MgO·Al2O3 Spinel Inclusion Generation in Extra-Low Oxygen Steels
- (2015) Chunyang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Study of Inclusions in High Sulfur, Al-Killed Ca-Treated Steel via Experiments and Thermodynamic Calculations
- (2015) Wagner Viana Bielefeldt et al. STEEL RESEARCH INTERNATIONAL
- A Study of Cluster Characteristics in Liquid Stainless Steel and in a Clogged Nozzle
- (2015) Diana Janis et al. STEEL RESEARCH INTERNATIONAL
- A Multi-step Thermodynamic Model for Alumina Formation during Aluminum Deoxidation in Fe–O–Al Melt
- (2015) Guo-Cheng Wang et al. Acta Metallurgica Sinica-English Letters
- Learning about the nucleation pathway of MgO·Al2O3 spinel from an Fe–O–Al–Mg melt using a two-step nucleation mechanism
- (2015) Nanfu Zong et al. RSC Advances
- Transient Evolution of Inclusions during Calcium Modification in Linepipe Steels
- (2015) Ying Ren et al. ISIJ INTERNATIONAL
- A Kinetic Model to Predict the Compositions of Metal, Slag and Inclusions during Ladle Refining: Part2. Condition to Control the Inclusion Composition
- (2014) Akifumi Harada et al. ISIJ INTERNATIONAL
- A Kinetic Model to Predict the Compositions of Metal, Slag and Inclusions during Ladle Refining: Part 1. Basic Concept and Application
- (2014) Akifumi Harada et al. ISIJ INTERNATIONAL
- Development of a Thermodynamic Database for Mold Flux and Application to the Continuous Casting Process
- (2014) Marie-Aline Van Ende et al. ISIJ INTERNATIONAL
- Kinetic Analysis of Compositional Changes in Inclusions during Ladle Refining
- (2014) Akifumi Harada et al. ISIJ INTERNATIONAL
- Dissolution Behavior of Mg from MgO into Molten Steel Deoxidized by Al
- (2014) Akifumi Harada et al. ISIJ INTERNATIONAL
- Mn-Depleted Zone Formation in Rapidly Cooled High-Strength Low-Alloy Steel Welds
- (2014) Yongjoon Kang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Formation and Thermodynamics of Mg-Al-Ti-O Complex Inclusions in Mg-Al-Ti-Deoxidized Steel
- (2014) Ying Ren et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of Al deoxidation on the formation behavior of inclusions in Ce-added stainless steel melts
- (2014) Sun Kuk Kwon et al. METALS AND MATERIALS INTERNATIONAL
- Influence of Ti on non-metallic inclusion formation and acicular ferrite nucleation in high-strength low-alloy steel weld metals
- (2014) Yongjoon Kang et al. METALS AND MATERIALS INTERNATIONAL
- Inclusion Development in Steel During Ladle Metallurgical Treatment - A Process Simulation Model - Part: Industrial Validation
- (2014) Piotr R. Scheller et al. STEEL RESEARCH INTERNATIONAL
- An Experimental and Thermodynamic Study of Non-Metallic Inclusions in High Si Stainless Steels Regarding Clogging During Casting
- (2014) Erik Roos et al. STEEL RESEARCH INTERNATIONAL
- Compositional Evolution of Oxide Inclusions in Austenitic Stainless Steel during Continuous Casting
- (2014) Ja-Yong Choi et al. STEEL RESEARCH INTERNATIONAL
- Characteristics of Inclusions in Low Carbon Al-Killed Steel during Ladle Furnace Refining and Calcium Treatment
- (2013) Wen Yang et al. ISIJ INTERNATIONAL
- In SituObservation of the Dissolution of SiO2Particles in CaO-Al2O3-SiO2Slags and Mathematical Analysis of its Dissolution Pattern
- (2013) Stefan Feichtinger et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Oxide Formation Mechanisms in High Manganese Steel Welds
- (2013) Dooyoung Kim et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Slag Composition on the Concentration of Al2O3 in the Inclusions in Si-Mn-killed Steel
- (2013) Jun Seok Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of silicate structure on thermodynamic properties of calcium silicate melts: Quantitative analysis of Raman spectra
- (2013) Joo Hyun Park METALS AND MATERIALS INTERNATIONAL
- Three-Dimensional Investigations of Inclusions in Ferroalloys
- (2013) Yanyan Bi et al. STEEL RESEARCH INTERNATIONAL
- Effects of inclusions on very high cycle fatigue properties of high strength steels
- (2012) S X Li INTERNATIONAL MATERIALS REVIEWS
- Numerical Analysis of Surface Tension Gradient Effect on the Behavior of Gas Bubbles at the Solid/Liquid Interface of Steel
- (2012) Sang-Min Lee et al. ISIJ INTERNATIONAL
- Modeling the Entrapment of Nonmetallic Inclusions in Steel Continuous-Casting Billets
- (2012) Lifeng Zhang et al. JOM
- Composition–structure–property relationships of CaO–MO–SiO2 (M=Mg2+, Mn2+) systems derived from micro-Raman spectroscopy
- (2012) Joo Hyun Park JOURNAL OF NON-CRYSTALLINE SOLIDS
- Characterization of Nonmetallic Inclusions in High-Manganese and Aluminum-Alloyed Austenitic Steels
- (2012) Joo Hyun Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Complex Inclusion Particles on the Solidification Structure of Fe-Ni-Mn-Mo Alloy
- (2012) Jun Seok Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A Review of the Relationship between Viscosity and the Structure of Calcium-Silicate-Based Slags in Ironmaking
- (2012) Il Sohn et al. STEEL RESEARCH INTERNATIONAL
- Effect of inclusions on the solidification structures of ferritic stainless steel: Computational and experimental study of inclusion evolution
- (2011) Joo Hyun Park CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Effects of copper addition on the formation of inclusions and the resistance to pitting corrosion of high performance duplex stainless steels
- (2011) Soon-Hyeok Jeon et al. CORROSION SCIENCE
- Pilot plant study of nozzle clogging mechanisms during casting of REM treated stainless steels
- (2011) N Kojola et al. IRONMAKING & STEELMAKING
- Mechanism of Change in Chemical Composition of Oxide Inclusions in Fe–Cr Alloys Deoxidized with Mn and Si by Heat Treatment at 1473 K
- (2011) Hiroyuki Shibata et al. ISIJ INTERNATIONAL
- Effect of CaF2 and Li2O Additives on the Viscosity of CaO–SiO2–Na2O Slags
- (2011) Hyuk Kim et al. ISIJ INTERNATIONAL
- Thermodynamics of Inclusion Formation and Its Influence on the Corrosion Behavior of Cu Bearing Duplex Stainless Steels
- (2011) Soon-Hyeok Jeon et al. MATERIALS TRANSACTIONS
- Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part II. Results and Discussion
- (2011) N. Verma et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part I. Background, Experimental Techniques and Analysis Methods
- (2011) Neerav Verma et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- On the Dissolution Behavior of Sulfur in Ternary Silicate Slags
- (2011) Youn-Bae Kang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A Kinetic Model for the Ruhrstahl Heraeus (RH) Degassing Process
- (2011) Marie-Aline van Ende et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- The effect of boron oxide on the crystallization behavior of MgAl2O4 spinel phase during the cooling of the CaO-SiO2-10 mass.% MgO-30 mass.%Al2O3 systems
- (2011) Joo Hyun Park METALS AND MATERIALS INTERNATIONAL
- Steels for bearings
- (2011) H.K.D.H. Bhadeshia PROGRESS IN MATERIALS SCIENCE
- Overview of the applications of thermodynamic databases to steelmaking processes
- (2010) In-Ho Jung CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced cracking
- (2010) H.B. Xue et al. CORROSION SCIENCE
- Some aspects of alumina created by deoxidation and reoxidation in steel
- (2010) W. Tiekink et al. IRONMAKING & STEELMAKING
- Composition change in oxide inclusions of stainless steel by heat treatment
- (2010) H. Shibata et al. IRONMAKING & STEELMAKING
- The Composition and Morphology Evolution of Oxide Inclusions in Ti-bearing Ultra Low-carbon Steel Melt Refined in the RH Process
- (2010) Min Wang et al. ISIJ INTERNATIONAL
- Mathematical Model for Nucleation, Ostwald Ripening and Growth of Inclusion in Molten Steel
- (2010) Hong Lei et al. ISIJ INTERNATIONAL
- Nucleation and Growth of Alumina Inclusion in Early Stages of Deoxidation: Numerical Modeling
- (2010) Yan Jin et al. ISIJ INTERNATIONAL
- Control of MgO·Al2O3 Spinel Inclusions in Stainless Steels
- (2010) Joo Hyun Park et al. ISIJ INTERNATIONAL
- A Comparison of a Two-Dimensional and a Three-Dimensional Method for Inclusion Determinations in Tool Steel
- (2010) H. Doostmohammadi et al. STEEL RESEARCH INTERNATIONAL
- Computational Thermodynamic Study of Inclusions Formation in the Continuous Casting of SAE 8620 Steel
- (2010) W. V. Bielefeldt et al. STEEL RESEARCH INTERNATIONAL
- Interfacial Reaction between Refractory Materials and Metallurgical Slags containing Fluoride
- (2010) J.H. Park et al. STEEL RESEARCH INTERNATIONAL
- The Effect of MgO on the Viscosity of the CaO-SiO2-20 wt%Al2O3-MgO Slag System
- (2010) Hyuk Kim et al. STEEL RESEARCH INTERNATIONAL
- Laboratory study on the formation of Al2O3 inclusions at the on-set of deoxidation and during reoxidation
- (2010) Marie-Aline Ende et al. Frontiers of Materials Science
- Influence of non-metal inclusions on mechanical properties of CLAM steel
- (2009) Shaojun Liu et al. FUSION ENGINEERING AND DESIGN
- Mathematical Model for Prediction of Composition of Inclusions Formed during Solidification of Liquid Steel
- (2009) S. K. Choudhary et al. ISIJ INTERNATIONAL
- Thermodynamic Modeling of the Al2O3–Ti2O3–TiO2 System and Its Applications to the Fe–Al–Ti–O Inclusion Diagram
- (2009) In-Ho Jung et al. ISIJ INTERNATIONAL
- On the Role of Non-metallic Inclusions in the Nucleation of Acicular Ferrite in Steels
- (2009) D. S. Sarma et al. ISIJ INTERNATIONAL
- Thermodynamic Database for the Al-Ca-Co-Cr-Fe-Mg-Mn-Ni-Si-O-P-S System and Applications in Ferrous Process Metallurgy
- (2009) Sergei A. Decterov et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Phase diagram study for the CaO-SiO2-Cr2O3-5 mass.%MgO-10 mass.%MnO system
- (2009) Joo Hyun Park et al. METALS AND MATERIALS INTERNATIONAL
- Thermodynamic Evaluation of Formation of Oxide–Sulfide Duplex Inclusions in Steel
- (2008) S. K. Choudhary et al. ISIJ INTERNATIONAL
- Effects of Electro-Slag Remelting on Inclusion Formation and Impact Property of Reduced Activation Ferritic/Martensitic Steels
- (2008) Atsushi Sawahata et al. JOURNAL OF THE JAPAN INSTITUTE OF METALS
- Thermodynamics of the Formation of MgO-Al2O3-TiO x Inclusions in Ti-Stabilized 11Cr Ferritic Stainless Steel
- (2008) Joo Hyun Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Application of ArcelorMittal Maizières thermodynamic models to liquid steel elaboration
- (2008) J. Lehmann REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES
- Thermodynamic investigation on the formation of inclusions containing MgAl2O4 spinel during 16Cr–14Ni austenitic stainless steel manufacturing processes
- (2007) J.H. Park MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now