Controlled Grain Refinement of Biodegradable Zn-Mg Alloy: The Effect of Magnesium Alloying and Multi-Pass Hydrostatic Extrusion Preceded by Hot Extrusion

A Novel High-Strength Zn-3Ag-0.5Mg Alloy Processed by Hot Extrusion, Cold Rolling, or High-Pressure Torsion

(2020) Maria Wątroba et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

High-pressure torsion processing of Zn–3Mg alloy and its hybrid counterpart: A comparative study

(2020) David Hernández-Escobar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure-strength relationship of ultrafine-grained titanium manufactured by unconventional severe plastic deformation process

(2020) Daniel Wojtas et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review

(2019) J. Venezuela et al.   Acta Biomaterialia

Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP

(2019) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Current status and perspectives of zinc-based absorbable alloys for biomedical applications

(2019) David Hernández-Escobar et al.   Acta Biomaterialia

Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP

(2019) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Branching of {110) twin boundaries in five-layered Ni-Mn-Ga bent single crystals

(2019) R. Chulist et al.   MATERIALS & DESIGN

Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn–Mg hybrids processed by High-Pressure Torsion

(2019) David Hernández-Escobar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material

(2019) Maria Wątroba et al.   MATERIALS & DESIGN

Zinc-based alloys for degradable vascular stent applications

(2018) Ehsan Mostaed et al.   Acta Biomaterialia

Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion

(2018) M.G. Jiang et al.   ACTA MATERIALIA

Microstructure of titanium on complex deformation paths: Comparison of ECAP, KOBO and HE techniques

(2018) J. Kawałko et al.   MATERIALS CHARACTERIZATION

A new approach to plastic deformation of biodegradable zinc alloy with magnesium and its effect on microstructure and mechanical properties

(2018) A. Jarzębska et al.   MATERIALS LETTERS

Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation

(2018) Hualan Jin et al.   Materials Science & Engineering C-Materials for Biological Applications

Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing

(2018) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion

(2018) David Hernández-Escobar et al.   PHILOSOPHICAL MAGAZINE

The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper

(2017) Galit Katarivas Levy et al.   Metals

Zinc subjected to plastic deformation by complex loading and conventional extrusion: Comparison of the microstructure and mechanical properties

(2017) K. Pieła et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of the micrograined hypoeutectic Zn–Mg alloy

(2016) J. Kubásek et al.   International Journal of Minerals Metallurgy and Materials

Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation

(2016) E. Mostaed et al.   Journal of the Mechanical Behavior of Biomedical Materials

Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion and subsequent short-term annealing

(2016) Yi Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review of dynamic recrystallization phenomena in metallic materials

(2016) K. Huang et al.   MATERIALS & DESIGN

On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals

(2015) T. B. Britton et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Biodegradable metals

(2014) Y.F. Zheng et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents

(2013) Patrick K. Bowen et al.   ADVANCED MATERIALS

Development of high-strength pure magnesium and wrought magnesium alloys AZ31, AZ61, and AZ91 processed by hydrostatic extrusion with back pressure

(2012) Wacek Pachla et al.   International Journal of Materials Research

Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation

(2011) D. Vojtěch et al.   Acta Biomaterialia

Developments in metallic biodegradable stents☆

(2009) H. Hermawan et al.   Acta Biomaterialia

Nanocrystalline titanium produced by hydrostatic extrusion

(2007) Wacek Pachla et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY