Development of Conventional Paul Model for Tensile Modulus of Polymer Carbon Nanotube Nanocomposites After Percolation Threshold by Filler Network Density

Simulation of Percolation Threshold, Tunneling Distance, and Conductivity for Carbon Nanotube (CNT)-Reinforced Nanocomposites Assuming Effective CNT Concentration

(2020) Yasser Zare et al.   Polymers

Study on the Effects of the Interphase Region on the Network Properties in Polymer Carbon Nanotube Nanocomposites

(2020) Yasser Zare et al.   Polymers

Analysis of the Connecting Effectiveness of the Interphase Zone on the Tensile Properties of Carbon Nanotubes (CNT) Reinforced Nanocomposite

(2020) Yasser Zare et al.   Polymers

Interface Analysis of Spark Plasma Sintered Carbon Nanotube Reinforced Ti6Al4V

(2019) A. O. Adegbenjo et al.   JOM

Evaluation of the Tensile Strength in Carbon Nanotube-Reinforced Nanocomposites Using the Expanded Takayanagi Model

(2019) Yasser Zare et al.   JOM

Delamination Mechanics of Carbon Nanotube Micropillars

(2019) Josef Brown et al.   ACS Applied Materials & Interfaces

A Simulation Work for the Influences of Aggregation/Agglomeration of Clay Layers on the Tensile Properties of Nanocomposites

(2019) Yasser Zare et al.   JOM

High‐performance thermoplastic polyurethane nanocomposites induced by hybrid application of functionalized graphene and carbon nanotubes

(2019) Amir Rostami et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Simple model for hydrolytic degradation of poly(lactic acid)/poly(ethylene oxide)/carbon nanotubes nanobiosensor in neutral phosphate‐buffered saline solution

(2019) Yasser Zare et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

The effective conductivity of polymer carbon nanotubes (CNT) nanocomposites

(2019) Yasser Zare et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

Prediction of loss factor (tan δ) for polymer nanocomposites as a function of yield tress, relaxation time and the width of transition region between Newtonian and power-law behaviors

(2019) Yasser Zare et al.   Journal of the Mechanical Behavior of Biomedical Materials

Degradation biosensing performance of polymer blend carbon nanotubes (CNTs) nanocomposites

(2019) Yasser Zare et al.   SENSORS AND ACTUATORS A-PHYSICAL

Tensile modulus prediction of carbon nanotubes-reinforced nanocomposites by a combined model for dispersion and networking of nanoparticles

(2019) Yasser Zare et al.   Journal of Materials Research and Technology-JMR&T

A new methodology based on micromechanics model to predict the tensile modulus and network formation in polymer/CNT nanocomposites

(2018) Entong Wang et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Graphene-Reinforced Metal and Polymer Matrix Composites

(2018) Ashish K. Kasar et al.   JOM

Synthesis and Characterization of High-Dielectric-Constant Nanographite–Polyurethane Composite

(2018) Praveen Mishra et al.   JOM

Prediction of storage modulus in solid-like poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites assuming the contributions of nanoparticles and interphase regions in the networks

(2018) Zifan Zhou et al.   Journal of the Mechanical Behavior of Biomedical Materials

Predictions of the electro-mechanical response of conductive CNT-polymer composites

(2018) Miguel A.S. Matos et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Roles of filler dimensions, interphase thickness, waviness, network fraction, and tunneling distance in tunneling conductivity of polymer CNT nanocomposites

(2018) Yasser Zare et al.   MATERIALS CHEMISTRY AND PHYSICS

Effect of “Z ” factor for strength of interphase layers on the tensile strength of polymer nanocomposites

(2018) Wanxi Peng et al.   POLYMER COMPOSITES

A multistep methodology based on developed Takayanagi, Paul and Ouali models for tensile modulus of polymer/carbon nanotubes nanocomposites above percolation threshold assuming the contribution of interphase regions

(2018) Navid Jamalzadeh et al.   POLYMER TESTING

Estimation of the tensile modulus of polymer carbon nanotube nanocomposites containing filler networks and interphase regions by development of the Kolarik model

(2018) Shenggui Chen et al.   RSC Advances

Synthesis and applications of graphene quantum dots: a review

(2018) Weifeng Chen et al.   Nanotechnology Reviews

Carboxymethyl cellulose grafted graphene oxide for efficient antitumor drug delivery

(2018) Zepeng Jiao et al.   Nanotechnology Reviews

Label-free ultrasensitive detection of breast cancer miRNA-21 biomarker employing electrochemical nano-genosensor based on sandwiched AgNPs in PANI and N-doped graphene

(2018) Razieh Salahandish et al.   BIOSENSORS & BIOELECTRONICS

A power model to predict the electrical conductivity of CNT reinforced nanocomposites by considering interphase, networks and tunneling condition

(2018) Yasser Zare et al.   COMPOSITES PART B-ENGINEERING

Stimuli-responsive graphene-incorporated multifunctional chitosan for drug delivery applications: a review

(2018) Sahar Gooneh-Farahani et al.   Expert Opinion on Drug Delivery

Enhanced Ethanol Separation by Corona-Modified Surface MWCNT Composite PDMS/PES.PVP Membrane

(2018) Amirhossein Farahi et al.   JOM

A Review of Spark Plasma Sintering of Carbon Nanotubes Reinforced Titanium-Based Nanocomposites: Fabrication, Densification, and Mechanical Properties

(2018) Avwerosuoghene Moses Okoro et al.   JOM

Influence of Graphene Oxide on Mechanical and Hydrophilic Properties of Epoxy/Banana Fiber Composites

(2018) Preetam S. Bharadiya et al.   JOM

Facile synthesis of multi-layer graphene by electrochemical exfoliation using organic solvent

(2018) Swapan Das et al.   Nanotechnology Reviews

Effect of multi-walled carbon nanotubes (MWCNTs) on the strength development of cementitious materials

(2018) Ali Naqi et al.   Journal of Materials Research and Technology-JMR&T

Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy

(2017) Brett G. Compton et al.   JOM

Evaluation of Mechanical Properties in Nanocomposites Containing Carbon Nanotubes Below and Above Percolation Threshold

(2017) Yasser Zare et al.   JOM

Stiffness threshold of randomly distributed carbon nanotube networks

(2015) Yuli Chen et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

High mechanical performance polyurea/organoclay nanocomposites

(2014) Dongyu Cai et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Low percolation threshold in polycarbonate/multiwalled carbon nanotubes nanocomposites through melt blending with poly(butylene terephthalate)

(2013) Sandip Maiti et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Impedance characteristics and conductivity of CNT/ABS nanocomposites

(2013) Mohammed H Al-Saleh et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites

(2012) R. Matadi Boumbimba et al.   MECHANICS OF MATERIALS

Effect of organoclays on the rheological and morphological properties of poly(acrylonitrile-butadiene-styrene)/poly(methyl methacrylate)/ clay nanocomposites

(2012) Tayebe Nazari et al.   POLYMER COMPOSITES

Tensile modulus of carbon nanotube/polypropylene composites – A computational study based on experimental characterization

(2011) Md A. Bhuiyan et al.   COMPUTATIONAL MATERIALS SCIENCE

Preparation and characterization of nanocomposites based on COOH functionalized multi-walled carbon nanotubes and on poly(trimethylene terephthalate)

(2011) A. Szymczyk et al.   Express Polymer Letters

Analysis of tensile modulus of PP/nanoclay/CaCO3 ternary nanocomposite using composite theories

(2011) Yasser Zare et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Electrical properties of polymer/expanded graphite nanocomposites with low percolation

(2010) R K Goyal et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Experimental study and theoretical analysis on the mechanical properties of SWNTs/phenolic composites

(2008) Nyan-Hwa Tai et al.   COMPOSITES PART B-ENGINEERING

Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties

(2008) K. Prashantha et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Correlating dynamical mechanical properties with temperature and clay composition of polymer-clay nanocomposites

(2008) Asifullah Khan et al.   COMPUTATIONAL MATERIALS SCIENCE