A Simulation Work for the Influences of Aggregation/Agglomeration of Clay Layers on the Tensile Properties of Nanocomposites

Stress distributions in nanocomposite sandwich cylinders reinforced by aggregated carbon nanotube

(2019) Reza Shokri-Oojghaz et al.   POLYMER COMPOSITES

A multistep methodology for effective conductivity of carbon nanotubes reinforced nanocomposites

(2019) Yasser Zare et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of styrene-butadiene rubber and fumed silica nano-filler on the microstructure and mechanical properties of glass fiber reinforced unsaturated polyester resin

(2019) Pouya Rajaee et al.   COMPOSITES PART B-ENGINEERING

A novel interface-treated micromechanics approach for accurate and efficient modeling of CNT/polymer composites

(2018) Majid Karimi et al.   COMPOSITE STRUCTURES

A combined experimental and theoretical approach to quantitative assessment of microstructure in PLA/PP/Organo-Clay nanocomposites; wide-angle x-ray scattering and rheological analysis

(2018) Masoud Razavi Aghjeh et al.   COMPOSITES PART B-ENGINEERING

Structural and phase separation characterization of poly(lactic acid)/poly(ethylene oxide)/carbon nanotube nanocomposites by rheological examinations

(2018) Yasser Zare et al.   COMPOSITES PART B-ENGINEERING

Effect of nanoparticle aggregation on the creep behavior of polymer nanocomposites

(2018) M.K. Hassanzadeh-Aghdam et al.   COMPOSITES SCIENCE AND TECHNOLOGY

High Corrosion Resistance Offered by Multi-Walled Carbon Nanotubes Directly Grown Over Mild Steel Substrate

(2018) Sweety Arora et al.   JOM

Fabrication of γ-MPS-Modified HNT–PMMA Nanocomposites by Ultrasound-Assisted Miniemulsion Polymerization

(2018) Kezia Buruga et al.   JOM

Synthesis and Characterization of High-Dielectric-Constant Nanographite–Polyurethane Composite

(2018) Praveen Mishra et al.   JOM

Synergism of Electrospinning and Nano-alumina Trihydrate on the Polymorphism, Crystallinity and Piezoelectric Performance of PVDF Nanofibers

(2018) Mohammed Khalifa et al.   JOM

A simple model for constant storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites at low frequencies assuming the properties of interphase regions and networks

(2018) Yasser Zare et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of functionalized process and CNTs aggregation on fracture mechanism and mechanical properties of polymer nanocomposite

(2018) Amir Hossein Esbati et al.   MECHANICS OF MATERIALS

Simplification and development of McLachlan model for electrical conductivity of polymer carbon nanotubes nanocomposites assuming the networking of interphase regions

(2018) Yasser Zare et al.   COMPOSITES PART B-ENGINEERING

Enhanced Ethanol Separation by Corona-Modified Surface MWCNT Composite PDMS/PES.PVP Membrane

(2018) Amirhossein Farahi et al.   JOM

A Review of Spark Plasma Sintering of Carbon Nanotubes Reinforced Titanium-Based Nanocomposites: Fabrication, Densification, and Mechanical Properties

(2018) Avwerosuoghene Moses Okoro et al.   JOM

Mechanical properties of carbon nanotube-filled polyethylene composites: A molecular dynamics simulation study

(2018) Hessam Yazdani et al.   POLYMER COMPOSITES

Chitosan/MWCNTs composite as bone substitute: Physical, mechanical, bioactivity, and biodegradation evaluation

(2018) Sanaz Soleymani Eil Bakhtiari et al.   POLYMER COMPOSITES

A comparative study on effects of natural and synthesised nano-clays on the fire and mechanical properties of epoxy composites

(2018) M. Rajaei et al.   COMPOSITES PART B-ENGINEERING

Role of nanosilica localization on morphology development of HDPE/PS/PMMA immiscible ternary blends

(2017) Z. Javidi et al.   Express Polymer Letters

Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy

(2017) Brett G. Compton et al.   JOM

Morphology, microstructure and rheological properties of SAN (styrene-acrylonitrile)/EPDM (ethylene-propylene-diene monomer) nanocomposites: Investigating the role of organoclay type and order of mixing

(2017) Javad Jeddi et al.   MATERIALS CHEMISTRY AND PHYSICS

A Two-Step Methodology to Study the Influence of Aggregation/Agglomeration of Nanoparticles on Young’s Modulus of Polymer Nanocomposites

(2017) Xinyue Ma et al.   Nanoscale Research Letters

A Two-Step Methodology to Study the Influence of Aggregation/Agglomeration of Nanoparticles on Young’s Modulus of Polymer Nanocomposites

(2017) Xinyue Ma et al.   Nanoscale Research Letters

Shear, Bulk, and Young’s Moduli of Clay/Polymer Nanocomposites Containing the Stacks of Intercalated Layers as Pseudoparticles

(2016) Yasser Zare   Nanoscale Research Letters

Unraveling the localization behavior of MWCNTs in binary polymer blends using thermodynamics and viscoelastic approaches

(2016) Amir Rostami et al.   POLYMER COMPOSITES

Shear, Bulk, and Young’s Moduli of Clay/Polymer Nanocomposites Containing the Stacks of Intercalated Layers as Pseudoparticles

(2016) Yasser Zare   Nanoscale Research Letters

Properties and ultrafiltration efficiency of cellulose acetate/organically modified Mt (CA/OMMt) nanocomposite membrane for humic acid removal

(2015) Fatemeh Sabeti Dehkordi et al.   APPLIED CLAY SCIENCE

Effect of clay modifier on morphology, thermal properties and flammability of newly synthesized poly(sulfide–sulfone–amide)

(2015) Meisam Shabanian et al.   APPLIED CLAY SCIENCE

Mechanical and impact performance of three-phase polyamide 6 nanocomposites

(2015) Laura Gendre et al.   MATERIALS & DESIGN

Preparation of clay mineral polymer nanocomposites by adsorption in solution

(2012) Jana Kredatusová et al.   APPLIED CLAY SCIENCE

Effect of different modified nanoclays on the kinetics of preparation and properties of polymer-based nanocomposites

(2012) Saeid Rahimi-Razin et al.   JOURNAL OF POLYMER RESEARCH

Quantification of carbon nanotube distribution and property correlation in nanocomposites

(2009) Srinivasa R. Bakshi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING