Optimization of WEDM for precise machining of novel developed Al6061-7.5% SiC squeeze-casted composite
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Optimization of WEDM for precise machining of novel developed Al6061-7.5% SiC squeeze-casted composite
Authors
Keywords
-
Journal
The International Journal of Advanced Manufacturing Technology
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2020-10-21
DOI
10.1007/s00170-020-06218-5
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Electro discharge machining of Inconel 718 alloy and process optimization
- (2020) Farshid Jafarian MATERIALS AND MANUFACTURING PROCESSES
- Modelling the Mechanical Attributes (Roughness, Strength, and Hardness) of Al-alloy A356 during Sand Casting
- (2020) Kashif Ishfaq et al. Materials
- Surface Analysis of Wire-Electrical-Discharge-Machining-Processed Shape-Memory Alloys
- (2020) Rakesh Chaudhari et al. Materials
- Mechanical characterization of aged AA2026-AA2026 overcast joints fabricated by squeeze casting
- (2020) Muhammad Asad Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parametric optimization of material removal rate, surface roughness, and kerf width in high-speed wire electric discharge machining (HS-WEDM) of DC53 die steel
- (2020) Yasir Nawaz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the Investigation of Surface Integrity of Ti6Al4V ELI Using Si-Mixed Electric Discharge Machining
- (2020) Muhammad Umar Farooq et al. Materials
- Estimation of wire strength based on residual stresses induced during wire electric discharge machining
- (2020) Sanghamitra Das et al. Journal of Manufacturing Processes
- Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite
- (2019) Muhammad Hassan Sarfraz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Exploring the contribution of unconventional parameters on spark gap formation and its minimization during WEDM of layered composite
- (2019) Kashif Ishfaq et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles
- (2019) Aldenor G. Santos et al. Scientific Reports
- Evaluation of surface quality and mechanical properties of squeeze casted AA2026 aluminum alloy using response surface methodology
- (2019) Muhammad Asad Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluating Material’s Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses
- (2019) Kashif Ishfaq et al. Materials
- Surface morphology evaluation of hardened HSLA steel using cryogenic-treated brass wire in WEDM process
- (2019) Waseem Tahir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Vibration assisted high-speed wire electric discharge machining for machining surface microgrooves
- (2019) Xuyang Chu et al. Journal of Manufacturing Processes
- Evaluating the effects of as-casted and aged overcasting of Al-Al joints
- (2018) Muhammad Asad Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An investigation of surface roughness and parametric optimization during wire electric discharge machining of cladded material
- (2018) Kashif Ishfaq et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach
- (2018) A. Dey et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigating the effects of different electrodes on Al6061-SiC-7.5 wt% during electric discharge machining
- (2018) Muhammad Huzaifa Raza et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analyzing wire deflection errors of WEDM process on small arced corners
- (2018) Hamid Abyar et al. Journal of Manufacturing Processes
- Improvement of surface integrity of Nimonic C 263 super alloy produced by WEDM through various post-processing techniques
- (2017) Amitava Mandal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parametric optimization for improving impact strength of squeeze cast of hybrid metal matrix (LM24–SiCp–coconut shell ash) composite
- (2017) M. Arulraj et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites
- (2017) Abhijit Dey et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of wire-Cut EDM process parameters on surface roughness of HSLA steel
- (2016) Junaid Ali Abbasi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel
- (2016) Muhammad Azam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of cutting speed (CS) for HSLA steel in wire electrical discharge machining (WEDM) using moly wire
- (2016) Muhammad Azam et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- Experimental investigation on machinability of in situ formed TiB 2 particles reinforced Al MMCs
- (2016) Jiang Rui-song et al. Journal of Manufacturing Processes
- Fabrication of aluminum matrix composites reinforced with nano- to micrometer-sized SiC particles
- (2016) R. Taherzadeh Mousavian et al. MATERIALS & DESIGN
- Modeling of cutter displacements during ball end milling of inclined surfaces
- (2015) S. Wojciechowski et al. Archives of Civil and Mechanical Engineering
- Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis
- (2015) S. Dewangan et al. MEASUREMENT
- Interfacial valence electron localization and the corrosion resistance of Al-SiC nanocomposite
- (2015) Sareh Mosleh-Shirazi et al. Scientific Reports
- Empirical modeling and optimization of kerf and wire wear ratio in wire electrical discharge machining
- (2014) D. V. S. S. S. V. Prasad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites
- (2014) Thella Babu Rao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parametric optimization for surface roughness, kerf and MRR in wire electrical discharge machining (WEDM) using Taguchi design of experiment
- (2013) Adeel Ikram et al. Journal of Mechanical Science and Technology
- Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B4C): A Response Surface Approach
- (2013) Palani Sivaprakasam et al. MATERIALS AND MANUFACTURING PROCESSES
- Study on Microrotating Structure Using Microwire Electrical Discharge Machining
- (2013) Xuesong Geng et al. MATERIALS AND MANUFACTURING PROCESSES
- Study of Surface Properties in Particulate-Reinforced Metal Matrix Composites (MMCs) Using Powder-Mixed Electrical Discharge Machining (EDM)
- (2013) Sarabjeet Singh Sidhu et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite
- (2013) Reza Kashiry Fard et al. Journal of Manufacturing Processes
- Influence of SiC Particles Distribution and Their Weight Percentage on 7075 Al Alloy
- (2010) Rajesh Kumar Bhushan et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The effects of aging on machinability of 6061 aluminium alloy
- (2008) Halil Demir et al. MATERIALS & DESIGN
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started