Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140
Authors
Keywords
-
Journal
SENSORS
Volume 20, Issue 16, Pages 4377
Publisher
MDPI AG
Online
2020-08-06
DOI
10.3390/s20164377
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2
- (2020) Onur Özbek et al. Journal of Materials Research and Technology-JMR&T
- Investigations of surface quality and energy consumption associated with costs and material removal rate during face milling of AISI 1045 steel
- (2020) Danil Yu. Pimenov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization and Analysis of Process Parameters for Flank Wear, Cutting Forces and Vibration in Turning of AISI 5140: A Comprehensive Study
- (2020) Abdullah Aslan MEASUREMENT
- Measurement and multi-response optimization of turning parameters for magnesium alloy using hybrid combination of Taguchi-GRA-PCA technique
- (2020) R. Viswanathan et al. MEASUREMENT
- Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties
- (2020) Radoslaw W. Maruda et al. TRIBOLOGY INTERNATIONAL
- Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite
- (2020) Rashid Ali Laghari et al. Metals
- Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel
- (2020) Ramazan Çakıroğlu et al. Journal of Materials Research and Technology-JMR&T
- Ultraprecision machining of microlens arrays with integrated on-machine surface metrology
- (2019) Duo Li et al. OPTICS EXPRESS
- Experimental study on correlation between turning temperature rise and turning vibration in dry turning on aluminum alloy
- (2019) Qiu Yu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM)
- (2019) Asit Kumar Parida et al. MEASUREMENT
- Tool wear evaluation under minimum quantity lubrication by clustering energy of acoustic emission burst signals
- (2019) Chengdong Wang et al. MEASUREMENT
- Effect of the Relative Position of the Face Milling Tool towards the Workpiece on Machined Surface Roughness and Milling Dynamics
- (2019) Danil Pimenov et al. Applied Sciences-Basel
- Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
- (2019) Emin Salur et al. COMPOSITES PART B-ENGINEERING
- Use of acoustic emission and cutting force signals to monitor built-up edge formation in stainless steel turning
- (2019) Yassmin Seid Ahmed et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On-machine surface measurement and applications for ultra-precision machining: a state-of-the-art review
- (2019) Duo Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision
- (2019) Pauline Ong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of progressive tool wear for determining of optimized machining parameters in turning
- (2019) Mustafa Kuntoğlu et al. MEASUREMENT
- A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
- (2019) Zafar Said et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- EFFECTS OF THE BORIDING PROCESS AND OF QUENCHING AND TEMPERING AFTER BORIDING ON THE MICROSTRUCTURE, HARDNESS AND WEAR OF AISI 5140 STEEL
- (2019) OSMAN BICAN et al. SURFACE REVIEW AND LETTERS
- Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method
- (2019) Khanna et al. Materials
- Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel
- (2019) Anshuman Das et al. MEASUREMENT
- Multi-sensor information fusion for remaining useful life prediction of machining tools by adaptive network based fuzzy inference system
- (2018) Jun Wu et al. APPLIED SOFT COMPUTING
- Surface quality and topographic inspection of variable compliance part after precise turning
- (2018) P. Nieslony et al. APPLIED SURFACE SCIENCE
- An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
- (2018) Mozammel Mia et al. JOURNAL OF CLEANER PRODUCTION
- Effect of cutting parameters on wear behavior of coated tool and surface roughness in high-speed turning of 300M
- (2018) Guangming Zheng et al. MEASUREMENT
- Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions
- (2018) G.M. Krolczyk et al. MEASUREMENT
- Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition
- (2018) Mozammel Mia et al. MEASUREMENT
- Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear
- (2018) D. Yu Pimenov et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Using artificial intelligence models for the prediction of surface wear based on surface isotropy levels
- (2018) A. Bustillo et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Solid Lubricant-assisted Minimum Quantity Lubrication and Cooling strategies to improve Ti6Al4V machinability in finishing turning
- (2018) S. Sartori et al. TRIBOLOGY INTERNATIONAL
- Mechanical properties and microstructure of composites produced by recycling metal chips
- (2018) Abdullah Aslan et al. International Journal of Minerals Metallurgy and Materials
- Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling
- (2018) S. Wojciechowski et al. MEASUREMENT
- Influence of vibration in cutting on tool flank wear: Fundamental study by conducting a cutting experiment with forced vibration in the depth-of-cut direction
- (2018) Ryosuke Kataoka et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Experimental study on cutting performance of microwave sintered Ti(C, N)/Al2O3 cermet tool in the dry machining of hardened steel
- (2017) Yong Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface integrity and tool life when turning of Ti-6Al-4V with coolant applied by different methods
- (2017) Rosemar B. Da Silva et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An investigation of tool temperature in end milling considering the flank wear effect
- (2017) Di Cui et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth
- (2017) D. Yu. Pimenov et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Influence of minimum quantity lubrication parameters on grind-hardening process
- (2017) Xiangming Huang et al. MATERIALS AND MANUFACTURING PROCESSES
- Optimization of cutting parameters for surface roughness in turning of studs manufactured from AISI 5140 steel using the Taguchi method
- (2017) Funda Kahraman Materials Testing
- A hybrid approach of Taguchi-Response Surface Methodology for modeling and optimization of Duplex Turning process
- (2017) Ravindra Nath Yadav MEASUREMENT
- A nested-ANN prediction model for surface roughness considering the effects of cutting forces and tool vibrations
- (2017) Yanni Chen et al. MEASUREMENT
- Fuzzy logic based tool condition monitoring for end-milling
- (2017) Besmir Cuka et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Tool condition monitoring in interrupted cutting with acceleration sensors
- (2017) Juho Ratava et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Optimization of energy consumption response parameters for turning operation using Taguchi method
- (2016) Paramjit Singh Bilga et al. JOURNAL OF CLEANER PRODUCTION
- Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy
- (2016) Murat Sarıkaya et al. JOURNAL OF CLEANER PRODUCTION
- Milling tool wear diagnosis by feed motor current signal using an artificial neural network
- (2016) Mehrdad Nouri Khajavi et al. Journal of Mechanical Science and Technology
- Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method
- (2016) Sujan Debnath et al. MEASUREMENT
- Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring
- (2016) M.S.H. Bhuiyan et al. MEASUREMENT
- Multi-sensor data fusion framework for CNC machining monitoring
- (2016) João A. Duro et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Experimental study of the combined influence of the tool geometry parameters on the cutting forces and tool vibrations
- (2015) Sadredine Abainia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling
- (2015) Paolo C. Priarone et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of secondary hardening on cutting forces, cutting temperature, and tool wear in hard turning of high alloy tool steels
- (2015) M.A. El Hakim et al. MEASUREMENT
- Experimental research of face mill wear effect to flat surface roughness
- (2014) D. Yu. Pimenov Journal of Friction and Wear
- Cutting tool condition monitoring by analyzing surface roughness, work piece vibration and volume of metal removed for AISI 1040 steel in boring
- (2013) K. Venkata Rao et al. MEASUREMENT
- Grinding with helically grooved wheels
- (2012) Uğur Köklü PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method
- (2011) İlhan Asiltürk et al. MEASUREMENT
- Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis
- (2011) Nilrudra Mandal et al. MEASUREMENT
- In situ non-contact measurements of surface roughness
- (2011) Yann Quinsat et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Optimization of tool geometry parameters for turning operations based on the response surface methodology
- (2010) Süleyman Neşeli et al. MEASUREMENT
- Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool
- (2009) Khaider Bouacha et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- An experimental investigation of chatter effects on tool life
- (2009) M Kayhan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Wear development on wiper Al2O3–TiC mixed ceramic tools in hard machining of high strength steel
- (2009) W. Grzesik WEAR
- In-cycle monitoring of tool nose wear and surface roughness of turned parts using machine vision
- (2008) H. H. Shahabi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of machinability in turning of microalloyed and quenched-tempered steels: Tool wear, statistical analysis, chip morphology
- (2008) A. Ebrahimi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Determination of micro-scale plastic strain caused by orthogonal cutting
- (2007) H. Ghadbeigi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started