- Home
- Publications
- Publication Search
- Publication Details
Title
Recent Progress on Polymer Materials for Additive Manufacturing
Authors
Keywords
-
Journal
ADVANCED FUNCTIONAL MATERIALS
Volume -, Issue -, Pages 2003062
Publisher
Wiley
Online
2020-08-06
DOI
10.1002/adfm.202003062
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High‐Temperature Polylactic Acid in Fused Deposition Modeling
- (2020) Behnam Akhoundi et al. POLYMER ENGINEERING AND SCIENCE
- The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
- (2020) Lydia Lanzl et al. POLYMER TESTING
- 3D printing of composites: design parameters and flexural performance
- (2020) Feras Korkees et al. RAPID PROTOTYPING JOURNAL
- Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
- (2020) Ievgenii Liashenko et al. Nature Communications
- Framework for Life Cycle Sustainability Assessment of Additive Manufacturing
- (2020) Ribeiro et al. Sustainability
- Vat photopolymerization of liquid, biodegradable PLGA-based oligomers as tissue scaffolds
- (2020) Emily M. Wilts et al. EUROPEAN POLYMER JOURNAL
- 3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications
- (2020) Emilio O. Bachtiar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development of Polyoxymethylene Particles via the Solution-Dissolution Process and Application to the Powder Bed Fusion of Polymers
- (2020) Maximilian A. Dechet et al. Materials
- 4D Printed Hydrogels: Fabrication, Materials, and Applications
- (2020) Yuting Dong et al. Advanced Materials Technologies
- Development of organically modified montmorillonite/polypropylene composite powders for selective laser sintering
- (2020) Lisa Jiaying Tan et al. POWDER TECHNOLOGY
- Mechanical characterization of biocompatible PEEK by FDM
- (2020) Yachen Zhao et al. Journal of Manufacturing Processes
- Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
- (2020) Arit Das et al. Additive Manufacturing
- Laser sintering of graphene nanoplatelets encapsulated polyamide powders
- (2020) Binling Chen et al. Additive Manufacturing
- State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
- (2019) Cristian Mendes-Felipe et al. Advanced Materials Technologies
- Volumetric additive manufacturing via tomographic reconstruction
- (2019) Brett E. Kelly et al. SCIENCE
- Preparation of spherical polymer powders for selective laser sintering from immiscible PA12/PEO blends with high viscosity ratios
- (2019) Xinshuang Yang et al. POLYMER
- Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography
- (2019) Soham Wadnap et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
- (2019) Yuxiong Guo et al. ADVANCED ENGINEERING MATERIALS
- Support-Free Ceramic Stereolithography of Complex Overhanging Structures Based on an Elasto-viscoplastic Suspension Feedstock
- (2019) Li He et al. ACS Applied Materials & Interfaces
- 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
- (2019) Qiyi Chen et al. ADVANCED FUNCTIONAL MATERIALS
- Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
- (2019) Longyu Li et al. CHEMISTRY-A EUROPEAN JOURNAL
- Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
- (2019) Sofiane Guessasma et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation
- (2019) Behnam Akhoundi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
- (2019) Nadav Noor et al. Advanced Science
- Selective Laser Sintering Fabricated Thermoplastic Polyurethane/Graphene Cellular Structures with Tailorable Properties and High Strain Sensitivity
- (2019) Alfredo Ronca et al. Applied Sciences-Basel
- Production and Processing of a Spherical Polybutylene Terephthalate Powder for Laser Sintering
- (2019) Rob Kleijnen et al. Applied Sciences-Basel
- Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties
- (2019) Zhuoran Jiang et al. ACS Applied Materials & Interfaces
- Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
- (2019) Lu-yu Zhou et al. ACS Applied Materials & Interfaces
- Preparation of Polypropylene Powder by Dissolution-Precipitation Method for Selective Laser Sintering
- (2019) Liang Fang et al. ADVANCES IN POLYMER TECHNOLOGY
- 3D printing of shape memory poly(d ,l -lactide-co -trimethylene carbonate) by direct ink writing for shape-changing structures
- (2019) Xue Wan et al. JOURNAL OF APPLIED POLYMER SCIENCE
- 3D bioprinting of collagen to rebuild components of the human heart
- (2019) A. Lee et al. SCIENCE
- 4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid
- (2019) Uchida et al. Micromachines
- Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing
- (2019) Hongzhi Wu et al. MATERIALS & DESIGN
- Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance
- (2019) Francesco Sillani et al. Additive Manufacturing
- Periodic buckling of soft 3D printed bioinspired tubes
- (2019) Jiayu Liu et al. Extreme Mechanics Letters
- Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique
- (2019) Elmeri Lahtinen et al. ACS Omega
- 3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications
- (2019) Rui Li et al. ACS Applied Materials & Interfaces
- Development of new polyimide powder for selective laser sintering
- (2019) Gleb Vaganov et al. JOURNAL OF MATERIALS RESEARCH
- Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
- (2019) Shouling Ding et al. POLYMER TESTING
- Simultaneous realization of conductive segregation network microstructure and minimal surface porous macrostructure by SLS 3D printing
- (2019) Xinpeng Gan et al. MATERIALS & DESIGN
- The re-usability of heat-exposed poly (ethylene terephthalate) powder for laser sintering
- (2019) Hao Gu et al. Additive Manufacturing
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- Powder bed fusion of poly(phenylene sulfide) at bed temperatures significantly below melting
- (2019) Camden A. Chatham et al. Additive Manufacturing
- Additive Manufacturing of Bioactive Poly(trimethylene carbonate)/β-Tricalcium Phosphate Composites for Bone Regeneration
- (2019) Kasper E. G. Dienel et al. BIOMACROMOLECULES
- Two-step approach based on selective laser sintering for high performance carbon black/ polyamide 12 composite with 3D segregated conductive network
- (2019) Rui Hong et al. COMPOSITES PART B-ENGINEERING
- Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene
- (2019) Mojtaba Nabipour et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
- (2019) Martin Spoerk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- Advances in 3D printing of thermoplastic polymer composites and nanocomposites
- (2019) Arnaldo D. Valino et al. PROGRESS IN POLYMER SCIENCE
- Scalable submicrometer additive manufacturing
- (2019) Sourabh K. Saha et al. SCIENCE
- Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
- (2019) David A. Walker et al. SCIENCE
- Characterisation of UHMWPE Polymer Powder for Laser Sintering
- (2019) Yas Khalil et al. Materials
- The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering
- (2019) Zhiyao Xu et al. Journal of Manufacturing Processes
- Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12
- (2019) L. Benedetti et al. MATERIALS & DESIGN
- Additively manufacturing high-performance bismaleimide architectures with ultraviolet-assisted direct ink writing
- (2019) Tao Wu et al. MATERIALS & DESIGN
- Determination of mercury at picogram level in natural waters with inductively coupled plasma mass spectrometry by using 3D printed metal scavengers
- (2019) Suvi Kulomäki et al. ANALYTICA CHIMICA ACTA
- Continuous liquid interface production of alginate/polyacrylamide hydrogels with supramolecular shape memory properties
- (2019) Bingxue Huang et al. CARBOHYDRATE POLYMERS
- Tough and biocompatible hybrid networks prepared from methacrylated poly(trimethylene carbonate) (PTMC) and methacrylated gelatin
- (2019) Jia Liang et al. EUROPEAN POLYMER JOURNAL
- Solid‐state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D‐printing
- (2019) Lu Yang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Anisotropy of poly(lactic acid)/carbon fiber composites prepared by fused deposition modeling
- (2019) Qingjun Ding et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Fabrication of piezoelectric nano-ceramics via stereolithography of low viscous and non-aqueous suspensions
- (2019) Wei Wang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Acrylonitrile Butadiene Styrene and Polypropylene Blend with Enhanced Thermal and Mechanical Properties for Fused Filament Fabrication
- (2019) Muhammad Harris et al. Materials
- Poly(ethylene terephthalate) Powder—A Versatile Material for Additive Manufacturing
- (2019) Hao Gu et al. Polymers
- Three-Dimensional Printing of Bisphenol A-Free Polycarbonates
- (2018) Wei Zhu et al. ACS Applied Materials & Interfaces
- 3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
- (2018) Xiao Kuang et al. ACS Applied Materials & Interfaces
- Bone Mechanical Properties in Healthy and Diseased States
- (2018) Elise F. Morgan et al. Annual Review of Biomedical Engineering
- A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering
- (2018) Binling Chen et al. APPLIED SURFACE SCIENCE
- Interfacial reinforcement in a poly-l-lactic acid/mesoporous bioactive glass scaffold via polydopamine
- (2018) Yong Xu et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Nano-size ceramic reinforced 3D biopolymer scaffolds: Tribomechanical testing and stem cell activity
- (2018) Igor Shishkovsky et al. COMPOSITE STRUCTURES
- Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering
- (2018) Shangqin Yuan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. COMPOSITES PART B-ENGINEERING
- Additive layer manufacturing of poly (ether ether ketone) via FDM
- (2018) Marianna Rinaldi et al. COMPOSITES PART B-ENGINEERING
- High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering
- (2018) Mengxue Yan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 4D printing of shape memory polyurethane via stereolithography
- (2018) Tingting Zhao et al. EUROPEAN POLYMER JOURNAL
- 3D-Printable ABS Blends with Improved Scratch Resistance and Balanced Mechanical Performance
- (2018) Siyuan Chen et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Post-process composition and biological responses of laser sintered PMMA and β-TCP composites
- (2018) Rajkumar Velu et al. JOURNAL OF MATERIALS RESEARCH
- Microfluidic Fabrication of Multistimuli-Responsive Tubular Hydrogels for Cellular Scaffolds
- (2018) Dongwan Kim et al. LANGMUIR
- Selective laser sintering of copper filled polyamide 12: Characterization of powder properties and process behavior
- (2018) Lydia Lanzl et al. POLYMER COMPOSITES
- Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12
- (2018) Peng Chen et al. POLYMER TESTING
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation
- (2018) Stephanie Kloos et al. POWDER TECHNOLOGY
- Effects of micro particle reinforcement on mechanical properties of 3D printed parts
- (2018) Ebubekir Çantı et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting using holographic beam manipulation: influence of polypropylene molecular weight
- (2018) Barry Haworth et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography
- (2018) Qin Lian et al. RAPID PROTOTYPING JOURNAL
- Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
- (2018) Kaijuan Chen et al. Soft Matter
- Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
- (2018) Aboma Gebisa et al. Materials
- Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
- (2018) Gianluca Cicala et al. Materials
- Performance of biocompatible PEEK processed by fused deposition additive manufacturing
- (2018) M.F. Arif et al. MATERIALS & DESIGN
- Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
- (2018) G.D. Goh et al. MATERIALS & DESIGN
- Effect of thermal treatments on the laser sinterability of cryogenically milled polybutene-1
- (2018) Michael Van den Eynde et al. MATERIALS & DESIGN
- Additive manufacture of PEEK cranial implants: Manufacturing considerations versus accuracy and mechanical performance
- (2018) S. Berretta et al. MATERIALS & DESIGN
- Screw extrusion-based additive manufacturing of PEEK
- (2018) Jian-Wei Tseng et al. MATERIALS & DESIGN
- Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
- (2018) Nahal Aliheidari et al. MATERIALS & DESIGN
- Mechanical performance of PEEK produced by additive manufacturing
- (2018) T.J. Hoskins et al. POLYMER TESTING
- 3D printing of shape memory hydrogels with tunable mechanical properties
- (2018) MD Nahin Islam Shiblee et al. Soft Matter
- Renewable Nanocomposites for Additive Manufacturing Using Fused Filament Fabrication
- (2018) Manuel Herrero et al. ACS Sustainable Chemistry & Engineering
- The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)
- (2018) Narendra Kumar et al. Journal of Manufacturing Processes
- Review of 3D printable hydrogels and constructs
- (2018) Huijun Li et al. MATERIALS & DESIGN
- Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides
- (2018) Daniel A. Rau et al. ACS Applied Materials & Interfaces
- Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
- (2018) Bas van Bochove et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Self Assembly-Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy-Amine Thermosets
- (2018) Kylie B. Manning et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Spherical Polybutylene Terephthalate (PBT)—Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
- (2018) Maximilian Dechet et al. Polymers
- Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion
- (2018) Iñigo Flores Ituarte et al. Polymers
- Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing
- (2018) Jinjie Luo et al. Micromachines
- 3D-Printed Mechanical Metamaterials with High Energy Absorption
- (2018) Shangqin Yuan et al. Advanced Materials Technologies
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
- (2018) Maximilian A. Dechet et al. CHEMICAL ENGINEERING SCIENCE
- Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling
- (2017) Dingchun Zhu et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents
- (2017) K. Wudy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
- (2017) Szymon Wojtyła et al. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE
- 3D direct writing fabrication of electrodes for electrochemical storage devices
- (2017) Min Wei et al. JOURNAL OF POWER SOURCES
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process
- (2017) Omar Ahmed Mohamed et al. MATERIALS LETTERS
- Preparation and characterization of photocured poly (ε-caprolactone) diacrylate/poly (ethylene glycol) diacrylate/chitosan for photopolymerization-type 3D printing tissue engineering scaffold application
- (2017) Yih-Lin Cheng et al. Materials Science & Engineering C-Materials for Biological Applications
- Constitutive model and optimal processing parameters of TC17 alloy with a transformed microstructure via kinetic analysis and processing maps
- (2017) Lian Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Properties of PLDLA/bioglass scaffolds produced by selective laser sintering
- (2017) Gean V. Salmoria et al. POLYMER BULLETIN
- Bio-inks for 3D bioprinting: recent advances and future prospects
- (2017) Ilze Donderwinkel et al. Polymer Chemistry
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
- (2017) Jintian Wu et al. POLYMER COMPOSITES
- Evaluation of poly(ethylene terephthalate) powder as a material for selective laser sintering, and characterization of printed part
- (2017) Zahir Bashir et al. POLYMER ENGINEERING AND SCIENCE
- Selective laser sintering of polymer blends: Bulk properties and process behavior
- (2017) Sandra Greiner et al. POLYMER TESTING
- Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
- (2017) S. Berretta et al. POLYMER TESTING
- Rheological behavior of Al 2 O 3 suspensions containing polyelectrolyte complexes for direct ink writing
- (2017) Yuehua Sun et al. POWDER TECHNOLOGY
- Effect of energy input on the UHMWPE fabricating process by selective laser sintering
- (2017) Changhui Song et al. RAPID PROTOTYPING JOURNAL
- Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling
- (2017) Ying-Guo Zhou et al. RAPID PROTOTYPING JOURNAL
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- (2017) Chuncheng Yang et al. RAPID PROTOTYPING JOURNAL
- Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions
- (2017) Xuan Song et al. RAPID PROTOTYPING JOURNAL
- Development of CNTs-filled photopolymer for projection stereolithography
- (2017) Hengky Eng et al. RAPID PROTOTYPING JOURNAL
- Comparison of 3D-Printed Poly-ɛ-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
- (2017) Ethan Nyberg et al. TISSUE ENGINEERING PART A
- Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software
- (2017) Yong Ho Cha et al. Applied Bionics and Biomechanics
- 3D printing of tunable shape memory polymer blends
- (2017) Siyuan Chen et al. Journal of Materials Chemistry C
- Two-Photon Polymerization Metrology: Characterization Methods of Mechanisms and Microstructures
- (2017) Christopher LaFratta et al. Micromachines
- A review on 3D printed smart devices for 4D printing
- (2017) Jeongwoo Lee et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Influence of the Origin of Polyamide 12 Powder on the Laser Sintering Process and Laser Sintered Parts
- (2017) Manfred Schmid et al. Applied Sciences-Basel
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Preparation of PA11/BaTiO 3 nanocomposite powders with improved processability, dielectric and piezoelectric properties for use in selective laser sintering
- (2017) Fangwei Qi et al. MATERIALS & DESIGN
- Comparison of crystallization characteristics and mechanical properties of poly(butylene terephthalate) processed by laser sintering and injection molding
- (2017) S. Arai et al. MATERIALS & DESIGN
- 4D printing of high performance shape memory polymer using stereolithography
- (2017) Yu Ying Clarrisa Choong et al. MATERIALS & DESIGN
- 3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
- (2017) Josef F. Christ et al. MATERIALS & DESIGN
- Measurements of the mechanical response of unidirectional 3D-printed PLA
- (2017) Y. Song et al. MATERIALS & DESIGN
- Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder
- (2017) Wu Jing et al. MATERIALS & DESIGN
- 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization
- (2017) Shangqin Yuan et al. MATERIALS & DESIGN
- Direct 4D printing via active composite materials
- (2017) Zhen Ding et al. Science Advances
- 3D Printing Macroscale Engineered Materials Using Ultrasound Directed Self-Assembly and Stereolithography
- (2017) John Greenhall et al. Advanced Materials Technologies
- 3D Printed Microfluidic Device with Microporous Mn2O3-Modified Screen Printed Electrode for Real-Time Determination of Heavy Metal Ions
- (2016) Ying Hong et al. ACS Applied Materials & Interfaces
- Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite
- (2016) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Approaching the compressive modulus of articular cartilage with a decellularized cartilage-based hydrogel
- (2016) Emily C. Beck et al. Acta Biomaterialia
- Mechanical Properties, Cytocompatibility and Manufacturability of Chitosan:PEGDA Hybrid-Gel Scaffolds by Stereolithography
- (2016) Viola B. Morris et al. ANNALS OF BIOMEDICAL ENGINEERING
- Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography
- (2016) Haidong Wu et al. CERAMICS INTERNATIONAL
- Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing
- (2016) Stephanie Fanselow et al. CHEMICAL ENGINEERING SCIENCE
- Optimized polybutylene terephthalate powders for selective laser beam melting
- (2016) Jochen Schmidt et al. CHEMICAL ENGINEERING SCIENCE
- Highly enhanced thermal conductivity of thermoplastic nanocomposites with a low mass fraction of MWCNTs by a facilitated latex approach
- (2016) Shangqin Yuan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds
- (2016) F.S. Senatov et al. COMPOSITES PART B-ENGINEERING
- PCL/PHBV blended three dimensional scaffolds fabricated by fused deposition modeling and responses of chondrocytes to the scaffolds
- (2016) Wasana Kosorn et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
- (2016) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane
- (2016) Shangqin Yuan et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
- (2016) Nanya Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preparation of polypropylene microspheres for selective laser sintering via thermal-induced phase separation: Roles of liquid-liquid phase separation and crystallization
- (2016) Shao-Jie Wang et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
- (2016) Zeang Zhao et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials
- (2016) Yuanyuan Zhang et al. POLYMER COMPOSITES
- The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering
- (2016) Jiaming Bai et al. POLYMER TESTING
- Layerless fabrication with continuous liquid interface production
- (2016) Rima Janusziewicz et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Study on the selective laser sintering of a low-isotacticity polypropylene powder
- (2016) Wei Zhu et al. RAPID PROTOTYPING JOURNAL
- Airborne particulate matter classification and concentration detection based on 3D printed virtual impactor and quartz crystal microbalance sensor
- (2016) Jiuxuan Zhao et al. SENSORS AND ACTUATORS A-PHYSICAL
- Fabrication of highly conductive graphene flexible circuits by 3D printing
- (2016) Di Zhang et al. SYNTHETIC METALS
- Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction
- (2016) Fei Shen et al. International Journal of Applied Mechanics
- In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
- (2016) Erika Fantino et al. Materials
- A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites
- (2016) Wei Zhu et al. Scientific Reports
- Programming Mechanical and Physicochemical Properties of 3D Hydrogel Cellular Microcultures via Direct Ink Writing
- (2016) Joselle M. McCracken et al. Advanced Healthcare Materials
- Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering
- (2016) Nicolas Mys et al. Polymers
- Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering
- (2016) Shangqin Yuan et al. Polymers
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- 3D printed anisotropic dielectric composite with meta-material features
- (2016) D.V. Isakov et al. MATERIALS & DESIGN
- Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
- (2016) Oraib Al-Ketan et al. Advanced Materials Technologies
- Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
- (2016) F. Castles et al. Scientific Reports
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Multi-shape active composites by 3D printing of digital shape memory polymers
- (2016) Jiangtao Wu et al. Scientific Reports
- 3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials
- (2016) Yiqi Mao et al. Scientific Reports
- Multimaterial 4D Printing with Tailorable Shape Memory Polymers
- (2016) Qi Ge et al. Scientific Reports
- Stereolithography of SiOC Ceramic Microcomponents
- (2015) Erika Zanchetta et al. ADVANCED MATERIALS
- Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
- (2015) Christopher B. Highley et al. ADVANCED MATERIALS
- 3D Printing of Shape Memory Polymers for Flexible Electronic Devices
- (2015) Matt Zarek et al. ADVANCED MATERIALS
- 3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
- (2015) Kajsa Markstedt et al. BIOMACROMOLECULES
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Designing a 3-D Printing-Based Channel Emulator With Printable Electromagnetic Materials
- (2015) Xiangyang Jiao et al. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
- Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
- (2015) Song XiaoHui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten–Polycarbonate Polymer Matrix Composite for Space-Based Applications
- (2015) Corey M. Shemelya et al. JOURNAL OF ELECTRONIC MATERIALS
- An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
- (2015) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
- (2015) Shannon E. Bakarich et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Dual-Responsive Hydrogels for Direct-Write 3D Printing
- (2015) Musan Zhang et al. MACROMOLECULES
- Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
- (2015) Chia-Tze Kao et al. Materials Science & Engineering C-Materials for Biological Applications
- Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
- (2015) P. Laszczak et al. MEDICAL ENGINEERING & PHYSICS
- Thermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering
- (2015) Jiaming Bai et al. MOLECULES
- 3D stereolithography printing of graphene oxide reinforced complex architectures
- (2015) Dong Lin et al. NANOTECHNOLOGY
- Manufacture of electrical and magnetic graded and anisotropic materials for novel manipulations of microwaves
- (2015) P. S. Grant et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Processing and characterization of a polylactic acid/nanoclay composite for laser sintering
- (2015) Jiaming Bai et al. POLYMER COMPOSITES
- Fabrication of patient specific composite orbital floor implants by stereolithography
- (2015) Mike A. Geven et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
- (2015) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- Designing bioinspired composite reinforcement architectures via 3D magnetic printing
- (2015) Joshua J. Martin et al. Nature Communications
- 3D Printable Graphene Composite
- (2015) Xiaojun Wei et al. Scientific Reports
- Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography
- (2015) Laura Elomaa et al. Journal of Materials Chemistry B
- Preparation of PA12 microspheres with tunable morphology and size for use in SLS processing
- (2015) Gexia Wang et al. MATERIALS & DESIGN
- Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts
- (2015) Wei Zhu et al. MATERIALS & DESIGN
- Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
- (2015) T. J. Hinton et al. Science Advances
- 3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
- (2014) Ning Xu et al. ACS Applied Materials & Interfaces
- 3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
- (2014) Kanguk Kim et al. ACS Nano
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A global sustainability perspective on 3D printing technologies
- (2014) Malte Gebler et al. ENERGY POLICY
- Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
- (2014) S. Berretta et al. EUROPEAN POLYMER JOURNAL
- Additive Manufacturing of Dense Alumina Ceramics
- (2014) Martin Schwentenwein et al. International Journal of Applied Ceramic Technology
- Selective laser sintering of polymer biocomposites based on polymethyl methacrylate
- (2014) Rajkumar Velu et al. JOURNAL OF MATERIALS RESEARCH
- Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
- (2014) Carmen R. Rocha et al. JOURNAL OF MATERIALS RESEARCH
- Materials perspective of polymers for additive manufacturing with selective laser sintering
- (2014) Manfred Schmid et al. JOURNAL OF MATERIALS RESEARCH
- Aging behavior of thermoplastic elastomers in the laser sintering process
- (2014) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS RESEARCH
- The importance of carbon fiber to polymer additive manufacturing
- (2014) Lonnie J. Love et al. JOURNAL OF MATERIALS RESEARCH
- Preparation and laser sintering of limestone PA 12 composite
- (2014) Yanling Guo et al. POLYMER TESTING
- Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering
- (2014) Jiaming Bai et al. POLYMER TESTING
- Organically modified montmorillonite polymer nanocomposites for stereolithography building process
- (2014) C. Esposito Corcione et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- A novel process route for the production of spherical LBM polymer powders with small size and good flowability
- (2014) Jochen Schmidt et al. POWDER TECHNOLOGY
- Guest editorial
- (2014) Dave Bourell et al. RAPID PROTOTYPING JOURNAL
- A review of melt extrusion additive manufacturing processes: I. Process design and modeling
- (2014) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography
- (2014) Sigrid Schüller-Ravoo et al. Advanced Healthcare Materials
- Inkjet Printing of Quantum Dots in Photopolymer for Use in Additive Manufacturing of Nanocomposites
- (2013) Amelia M. Elliott et al. ADVANCED ENGINEERING MATERIALS
- Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
- (2013) Leon S. Dimas et al. ADVANCED FUNCTIONAL MATERIALS
- Active materials by four-dimension printing
- (2013) Qi Ge et al. APPLIED PHYSICS LETTERS
- Development of composite porous scaffolds based on poly(lactide-co-glycolide)/nano-hydroxyapatite via selective laser sintering
- (2013) Cijun Shuai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development and characterization of novel photopolymerizable formulations for stereolithography
- (2013) Carola Esposito Corcione JOURNAL OF POLYMER ENGINEERING
- Flexible and Elastic Scaffolds for Cartilage Tissue Engineering Prepared by Stereolithography Using Poly(trimethylene carbonate)-Based Resins
- (2013) Sigrid Schüller-Ravoo et al. MACROMOLECULAR BIOSCIENCE
- A Straightforward Synthesis and Structure–Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization
- (2013) Zhiquan Li et al. MACROMOLECULES
- A novel quasicrystal-resin composite for stereolithography
- (2013) Adnene Sakly et al. MATERIALS & DESIGN
- Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes
- (2013) Jiaming Bai et al. POLYMER ENGINEERING AND SCIENCE
- Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
- (2013) Qiu Li Loh et al. TISSUE ENGINEERING PART B-REVIEWS
- Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals
- (2012) Sandeep Kumar et al. ACS Applied Materials & Interfaces
- Preparation of designed poly(d,l-lactide)/nanosized hydroxyapatite composite structures by stereolithography
- (2012) A. Ronca et al. Acta Biomaterialia
- Fabrication of 3-Dimensional Cellular Constructs via Microstereolithography Using a Simple, Three-Component, Poly(Ethylene Glycol) Acrylate-Based System
- (2012) Simon J. Leigh et al. BIOMACROMOLECULES
- Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography
- (2012) Robert Gauvin et al. BIOMATERIALS
- Porous 3D modeled scaffolds of bioactive glass and photocrosslinkable poly(ε-caprolactone) by stereolithography
- (2012) Laura Elomaa et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties
- (2012) Gean V. Salmoria et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
- (2012) Jyrki Korpela et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process
- (2012) Hyo Chan Kim et al. JOURNAL OF COMPOSITE MATERIALS
- Laser intensity effect on mechanical properties of wood–plastic composite parts fabricated by selective laser sintering
- (2012) Weiliang Zeng et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Micro-Engineered 3D Scaffolds for Cell Culture Studies
- (2012) Alexandra M. Greiner et al. MACROMOLECULAR BIOSCIENCE
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
- (2012) Simon J. Leigh et al. PLoS One
- Production of polymer particles below 5μm by wet grinding
- (2012) Jochen Schmidt et al. POWDER TECHNOLOGY
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
- (2012) Amit Joe Lopes et al. RAPID PROTOTYPING JOURNAL
- Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
- (2011) Laura Elomaa et al. Acta Biomaterialia
- The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells
- (2011) Kyobum Kim et al. BIOMATERIALS
- Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering
- (2011) Chunze Yan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography
- (2011) A. Badev et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
- Preparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by Stereolithography
- (2011) Sigrid Schüller-Ravoo et al. MACROMOLECULAR BIOSCIENCE
- Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
- (2011) M. Nikzad et al. MATERIALS & DESIGN
- Biomaterials & scaffolds for tissue engineering
- (2011) Fergal J. O'Brien Materials Today
- Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering
- (2011) G.V. Salmoria et al. POLYMER TESTING
- Shape-memory polymers and their composites: Stimulus methods and applications
- (2011) Jinsong Leng et al. PROGRESS IN MATERIALS SCIENCE
- Laser sintering of polyamides and other polymers
- (2011) R.D. Goodridge et al. PROGRESS IN MATERIALS SCIENCE
- An organically modified montmorillonite/nylon‐12 composite powder for selective laser sintering
- (2011) C.Z. Yan et al. RAPID PROTOTYPING JOURNAL
- Nano‐TiO2‐modified photosensitive resin for RP
- (2011) Duan Yugang et al. RAPID PROTOTYPING JOURNAL
- A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin
- (2011) S.J. Leigh et al. SENSORS AND ACTUATORS A-PHYSICAL
- Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
- (2010) Bin Duan et al. Acta Biomaterialia
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
- (2010) Brian Derby Annual Review of Materials Research
- Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding
- (2010) Siddharth Ram Athreya et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Selective laser sintering of polyamide 12/potassium titanium whisker composites
- (2010) Jinsong Yang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly( d,l -lactide)-based resins
- (2010) Tetsu M. Seck et al. JOURNAL OF CONTROLLED RELEASE
- Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
- (2010) R.D. Goodridge et al. POLYMER TESTING
- Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
- (2009) Szilvia Eosoly et al. Acta Biomaterialia
- A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
- (2009) Ferry P.W. Melchels et al. BIOMATERIALS
- An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
- (2009) Ruth D. Goodridge et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Gelatin-based photopolymers for bone replacement materials
- (2009) Monika Schuster et al. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
- The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites
- (2009) Shih-Jung Liu et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
- (2009) Siddharth Ram Athreya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering
- (2009) G.V. Salmoria et al. POLYMER TESTING
- In vitro study of hydroxyapatite-based photocurable polymer composites prepared by laser stereolithography and supercritical fluid extraction
- (2008) John J.A. Barry et al. Acta Biomaterialia
- Acrylic Nanocomposite Resins for Use in Stereolithography and Structural Light Modulation Based Rapid Prototyping and Rapid Manufacturing Technologies
- (2008) Matthias Gurr et al. ADVANCED FUNCTIONAL MATERIALS
- Simulation of random packing of spherical particles with different size distributions
- (2008) Yu Shi et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Synthesis of Ca–P nanoparticles and fabrication of Ca–P/PHBV nanocomposite microspheres for bone tissue engineering applications
- (2008) B. Duan et al. APPLIED SURFACE SCIENCE
- Fumaric Acid Monoethyl Ester-Functionalized Poly(d,l-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography
- (2008) Janine Jansen et al. BIOMACROMOLECULES
- Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
- (2008) Hung-Jen Yen et al. BIOMEDICAL MICRODEVICES
- Experimental investigation into the selective laser sintering of high-impact polystyrene
- (2008) Yusheng Shi et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Properties of porous structures prepared by stereolithography using a polylactide resin
- (2008) F.P.W. Melchels et al. JOURNAL OF CONTROLLED RELEASE
- Selective laser sintering of HIPS and investment casting technology
- (2008) Jinsong Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
- (2008) Phung Xuan Lan et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
- (2008) Yan Chunze et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography
- (2008) Jin Woo Lee et al. MICROELECTRONIC ENGINEERING
- Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape memory polymer networks
- (2008) David L. Safranski et al. POLYMER
- Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior
- (2008) G.V. Salmoria et al. POLYMER TESTING
- Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering
- (2007) Haseung Chung et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now