标题
Recent Progress on Polymer Materials for Additive Manufacturing
作者
关键词
-
出版物
ADVANCED FUNCTIONAL MATERIALS
Volume -, Issue -, Pages 2003062
出版商
Wiley
发表日期
2020-08-06
DOI
10.1002/adfm.202003062
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High‐Temperature Polylactic Acid in Fused Deposition Modeling
- (2020) Behnam Akhoundi et al. POLYMER ENGINEERING AND SCIENCE
- The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
- (2020) Lydia Lanzl et al. POLYMER TESTING
- 3D printing of composites: design parameters and flexural performance
- (2020) Feras Korkees et al. RAPID PROTOTYPING JOURNAL
- Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
- (2020) Ievgenii Liashenko et al. Nature Communications
- Framework for Life Cycle Sustainability Assessment of Additive Manufacturing
- (2020) Ribeiro et al. Sustainability
- Vat photopolymerization of liquid, biodegradable PLGA-based oligomers as tissue scaffolds
- (2020) Emily M. Wilts et al. EUROPEAN POLYMER JOURNAL
- 3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications
- (2020) Emilio O. Bachtiar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development of Polyoxymethylene Particles via the Solution-Dissolution Process and Application to the Powder Bed Fusion of Polymers
- (2020) Maximilian A. Dechet et al. Materials
- 4D Printed Hydrogels: Fabrication, Materials, and Applications
- (2020) Yuting Dong et al. Advanced Materials Technologies
- Development of organically modified montmorillonite/polypropylene composite powders for selective laser sintering
- (2020) Lisa Jiaying Tan et al. POWDER TECHNOLOGY
- Mechanical characterization of biocompatible PEEK by FDM
- (2020) Yachen Zhao et al. Journal of Manufacturing Processes
- Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
- (2020) Arit Das et al. Additive Manufacturing
- Laser sintering of graphene nanoplatelets encapsulated polyamide powders
- (2020) Binling Chen et al. Additive Manufacturing
- State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
- (2019) Cristian Mendes-Felipe et al. Advanced Materials Technologies
- Volumetric additive manufacturing via tomographic reconstruction
- (2019) Brett E. Kelly et al. SCIENCE
- Preparation of spherical polymer powders for selective laser sintering from immiscible PA12/PEO blends with high viscosity ratios
- (2019) Xinshuang Yang et al. POLYMER
- Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography
- (2019) Soham Wadnap et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
- (2019) Yuxiong Guo et al. ADVANCED ENGINEERING MATERIALS
- Support-Free Ceramic Stereolithography of Complex Overhanging Structures Based on an Elasto-viscoplastic Suspension Feedstock
- (2019) Li He et al. ACS Applied Materials & Interfaces
- 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
- (2019) Qiyi Chen et al. ADVANCED FUNCTIONAL MATERIALS
- Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
- (2019) Longyu Li et al. CHEMISTRY-A EUROPEAN JOURNAL
- Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
- (2019) Sofiane Guessasma et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation
- (2019) Behnam Akhoundi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
- (2019) Nadav Noor et al. Advanced Science
- Selective Laser Sintering Fabricated Thermoplastic Polyurethane/Graphene Cellular Structures with Tailorable Properties and High Strain Sensitivity
- (2019) Alfredo Ronca et al. Applied Sciences-Basel
- Production and Processing of a Spherical Polybutylene Terephthalate Powder for Laser Sintering
- (2019) Rob Kleijnen et al. Applied Sciences-Basel
- Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties
- (2019) Zhuoran Jiang et al. ACS Applied Materials & Interfaces
- Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
- (2019) Lu-yu Zhou et al. ACS Applied Materials & Interfaces
- Preparation of Polypropylene Powder by Dissolution-Precipitation Method for Selective Laser Sintering
- (2019) Liang Fang et al. ADVANCES IN POLYMER TECHNOLOGY
- 3D printing of shape memory poly(d ,l -lactide-co -trimethylene carbonate) by direct ink writing for shape-changing structures
- (2019) Xue Wan et al. JOURNAL OF APPLIED POLYMER SCIENCE
- 3D bioprinting of collagen to rebuild components of the human heart
- (2019) A. Lee et al. SCIENCE
- 4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid
- (2019) Uchida et al. Micromachines
- Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing
- (2019) Hongzhi Wu et al. MATERIALS & DESIGN
- Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance
- (2019) Francesco Sillani et al. Additive Manufacturing
- Periodic buckling of soft 3D printed bioinspired tubes
- (2019) Jiayu Liu et al. Extreme Mechanics Letters
- Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique
- (2019) Elmeri Lahtinen et al. ACS Omega
- 3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications
- (2019) Rui Li et al. ACS Applied Materials & Interfaces
- Development of new polyimide powder for selective laser sintering
- (2019) Gleb Vaganov et al. JOURNAL OF MATERIALS RESEARCH
- Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
- (2019) Shouling Ding et al. POLYMER TESTING
- Simultaneous realization of conductive segregation network microstructure and minimal surface porous macrostructure by SLS 3D printing
- (2019) Xinpeng Gan et al. MATERIALS & DESIGN
- The re-usability of heat-exposed poly (ethylene terephthalate) powder for laser sintering
- (2019) Hao Gu et al. Additive Manufacturing
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- Powder bed fusion of poly(phenylene sulfide) at bed temperatures significantly below melting
- (2019) Camden A. Chatham et al. Additive Manufacturing
- Additive Manufacturing of Bioactive Poly(trimethylene carbonate)/β-Tricalcium Phosphate Composites for Bone Regeneration
- (2019) Kasper E. G. Dienel et al. BIOMACROMOLECULES
- Two-step approach based on selective laser sintering for high performance carbon black/ polyamide 12 composite with 3D segregated conductive network
- (2019) Rui Hong et al. COMPOSITES PART B-ENGINEERING
- Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene
- (2019) Mojtaba Nabipour et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
- (2019) Martin Spoerk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- Advances in 3D printing of thermoplastic polymer composites and nanocomposites
- (2019) Arnaldo D. Valino et al. PROGRESS IN POLYMER SCIENCE
- Scalable submicrometer additive manufacturing
- (2019) Sourabh K. Saha et al. SCIENCE
- Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
- (2019) David A. Walker et al. SCIENCE
- Characterisation of UHMWPE Polymer Powder for Laser Sintering
- (2019) Yas Khalil et al. Materials
- The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering
- (2019) Zhiyao Xu et al. Journal of Manufacturing Processes
- Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12
- (2019) L. Benedetti et al. MATERIALS & DESIGN
- Additively manufacturing high-performance bismaleimide architectures with ultraviolet-assisted direct ink writing
- (2019) Tao Wu et al. MATERIALS & DESIGN
- Determination of mercury at picogram level in natural waters with inductively coupled plasma mass spectrometry by using 3D printed metal scavengers
- (2019) Suvi Kulomäki et al. ANALYTICA CHIMICA ACTA
- Continuous liquid interface production of alginate/polyacrylamide hydrogels with supramolecular shape memory properties
- (2019) Bingxue Huang et al. CARBOHYDRATE POLYMERS
- Tough and biocompatible hybrid networks prepared from methacrylated poly(trimethylene carbonate) (PTMC) and methacrylated gelatin
- (2019) Jia Liang et al. EUROPEAN POLYMER JOURNAL
- Solid‐state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D‐printing
- (2019) Lu Yang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Anisotropy of poly(lactic acid)/carbon fiber composites prepared by fused deposition modeling
- (2019) Qingjun Ding et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Fabrication of piezoelectric nano-ceramics via stereolithography of low viscous and non-aqueous suspensions
- (2019) Wei Wang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Acrylonitrile Butadiene Styrene and Polypropylene Blend with Enhanced Thermal and Mechanical Properties for Fused Filament Fabrication
- (2019) Muhammad Harris et al. Materials
- Poly(ethylene terephthalate) Powder—A Versatile Material for Additive Manufacturing
- (2019) Hao Gu et al. Polymers
- Three-Dimensional Printing of Bisphenol A-Free Polycarbonates
- (2018) Wei Zhu et al. ACS Applied Materials & Interfaces
- 3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
- (2018) Xiao Kuang et al. ACS Applied Materials & Interfaces
- Bone Mechanical Properties in Healthy and Diseased States
- (2018) Elise F. Morgan et al. Annual Review of Biomedical Engineering
- A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering
- (2018) Binling Chen et al. APPLIED SURFACE SCIENCE
- Interfacial reinforcement in a poly-l-lactic acid/mesoporous bioactive glass scaffold via polydopamine
- (2018) Yong Xu et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Nano-size ceramic reinforced 3D biopolymer scaffolds: Tribomechanical testing and stem cell activity
- (2018) Igor Shishkovsky et al. COMPOSITE STRUCTURES
- Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering
- (2018) Shangqin Yuan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. COMPOSITES PART B-ENGINEERING
- Additive layer manufacturing of poly (ether ether ketone) via FDM
- (2018) Marianna Rinaldi et al. COMPOSITES PART B-ENGINEERING
- High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering
- (2018) Mengxue Yan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 4D printing of shape memory polyurethane via stereolithography
- (2018) Tingting Zhao et al. EUROPEAN POLYMER JOURNAL
- 3D-Printable ABS Blends with Improved Scratch Resistance and Balanced Mechanical Performance
- (2018) Siyuan Chen et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Post-process composition and biological responses of laser sintered PMMA and β-TCP composites
- (2018) Rajkumar Velu et al. JOURNAL OF MATERIALS RESEARCH
- Microfluidic Fabrication of Multistimuli-Responsive Tubular Hydrogels for Cellular Scaffolds
- (2018) Dongwan Kim et al. LANGMUIR
- Selective laser sintering of copper filled polyamide 12: Characterization of powder properties and process behavior
- (2018) Lydia Lanzl et al. POLYMER COMPOSITES
- Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12
- (2018) Peng Chen et al. POLYMER TESTING
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation
- (2018) Stephanie Kloos et al. POWDER TECHNOLOGY
- Effects of micro particle reinforcement on mechanical properties of 3D printed parts
- (2018) Ebubekir Çantı et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting using holographic beam manipulation: influence of polypropylene molecular weight
- (2018) Barry Haworth et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography
- (2018) Qin Lian et al. RAPID PROTOTYPING JOURNAL
- Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
- (2018) Kaijuan Chen et al. Soft Matter
- Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
- (2018) Aboma Gebisa et al. Materials
- Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
- (2018) Gianluca Cicala et al. Materials
- Performance of biocompatible PEEK processed by fused deposition additive manufacturing
- (2018) M.F. Arif et al. MATERIALS & DESIGN
- Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
- (2018) G.D. Goh et al. MATERIALS & DESIGN
- Effect of thermal treatments on the laser sinterability of cryogenically milled polybutene-1
- (2018) Michael Van den Eynde et al. MATERIALS & DESIGN
- Additive manufacture of PEEK cranial implants: Manufacturing considerations versus accuracy and mechanical performance
- (2018) S. Berretta et al. MATERIALS & DESIGN
- Screw extrusion-based additive manufacturing of PEEK
- (2018) Jian-Wei Tseng et al. MATERIALS & DESIGN
- Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
- (2018) Nahal Aliheidari et al. MATERIALS & DESIGN
- Mechanical performance of PEEK produced by additive manufacturing
- (2018) T.J. Hoskins et al. POLYMER TESTING
- 3D printing of shape memory hydrogels with tunable mechanical properties
- (2018) MD Nahin Islam Shiblee et al. Soft Matter
- Renewable Nanocomposites for Additive Manufacturing Using Fused Filament Fabrication
- (2018) Manuel Herrero et al. ACS Sustainable Chemistry & Engineering
- The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)
- (2018) Narendra Kumar et al. Journal of Manufacturing Processes
- Review of 3D printable hydrogels and constructs
- (2018) Huijun Li et al. MATERIALS & DESIGN
- Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides
- (2018) Daniel A. Rau et al. ACS Applied Materials & Interfaces
- Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
- (2018) Bas van Bochove et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Self Assembly-Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy-Amine Thermosets
- (2018) Kylie B. Manning et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Spherical Polybutylene Terephthalate (PBT)—Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
- (2018) Maximilian Dechet et al. Polymers
- Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion
- (2018) Iñigo Flores Ituarte et al. Polymers
- Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing
- (2018) Jinjie Luo et al. Micromachines
- 3D-Printed Mechanical Metamaterials with High Energy Absorption
- (2018) Shangqin Yuan et al. Advanced Materials Technologies
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
- (2018) Maximilian A. Dechet et al. CHEMICAL ENGINEERING SCIENCE
- Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling
- (2017) Dingchun Zhu et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents
- (2017) K. Wudy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
- (2017) Szymon Wojtyła et al. JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE
- 3D direct writing fabrication of electrodes for electrochemical storage devices
- (2017) Min Wei et al. JOURNAL OF POWER SOURCES
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process
- (2017) Omar Ahmed Mohamed et al. MATERIALS LETTERS
- Preparation and characterization of photocured poly (ε-caprolactone) diacrylate/poly (ethylene glycol) diacrylate/chitosan for photopolymerization-type 3D printing tissue engineering scaffold application
- (2017) Yih-Lin Cheng et al. Materials Science & Engineering C-Materials for Biological Applications
- Constitutive model and optimal processing parameters of TC17 alloy with a transformed microstructure via kinetic analysis and processing maps
- (2017) Lian Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Properties of PLDLA/bioglass scaffolds produced by selective laser sintering
- (2017) Gean V. Salmoria et al. POLYMER BULLETIN
- Bio-inks for 3D bioprinting: recent advances and future prospects
- (2017) Ilze Donderwinkel et al. Polymer Chemistry
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
- (2017) Jintian Wu et al. POLYMER COMPOSITES
- Evaluation of poly(ethylene terephthalate) powder as a material for selective laser sintering, and characterization of printed part
- (2017) Zahir Bashir et al. POLYMER ENGINEERING AND SCIENCE
- Selective laser sintering of polymer blends: Bulk properties and process behavior
- (2017) Sandra Greiner et al. POLYMER TESTING
- Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
- (2017) S. Berretta et al. POLYMER TESTING
- Rheological behavior of Al 2 O 3 suspensions containing polyelectrolyte complexes for direct ink writing
- (2017) Yuehua Sun et al. POWDER TECHNOLOGY
- Effect of energy input on the UHMWPE fabricating process by selective laser sintering
- (2017) Changhui Song et al. RAPID PROTOTYPING JOURNAL
- Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling
- (2017) Ying-Guo Zhou et al. RAPID PROTOTYPING JOURNAL
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- (2017) Chuncheng Yang et al. RAPID PROTOTYPING JOURNAL
- Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions
- (2017) Xuan Song et al. RAPID PROTOTYPING JOURNAL
- Development of CNTs-filled photopolymer for projection stereolithography
- (2017) Hengky Eng et al. RAPID PROTOTYPING JOURNAL
- Comparison of 3D-Printed Poly-ɛ-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
- (2017) Ethan Nyberg et al. TISSUE ENGINEERING PART A
- Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software
- (2017) Yong Ho Cha et al. Applied Bionics and Biomechanics
- 3D printing of tunable shape memory polymer blends
- (2017) Siyuan Chen et al. Journal of Materials Chemistry C
- Two-Photon Polymerization Metrology: Characterization Methods of Mechanisms and Microstructures
- (2017) Christopher LaFratta et al. Micromachines
- A review on 3D printed smart devices for 4D printing
- (2017) Jeongwoo Lee et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Influence of the Origin of Polyamide 12 Powder on the Laser Sintering Process and Laser Sintered Parts
- (2017) Manfred Schmid et al. Applied Sciences-Basel
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Preparation of PA11/BaTiO 3 nanocomposite powders with improved processability, dielectric and piezoelectric properties for use in selective laser sintering
- (2017) Fangwei Qi et al. MATERIALS & DESIGN
- Comparison of crystallization characteristics and mechanical properties of poly(butylene terephthalate) processed by laser sintering and injection molding
- (2017) S. Arai et al. MATERIALS & DESIGN
- 4D printing of high performance shape memory polymer using stereolithography
- (2017) Yu Ying Clarrisa Choong et al. MATERIALS & DESIGN
- 3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
- (2017) Josef F. Christ et al. MATERIALS & DESIGN
- Measurements of the mechanical response of unidirectional 3D-printed PLA
- (2017) Y. Song et al. MATERIALS & DESIGN
- Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder
- (2017) Wu Jing et al. MATERIALS & DESIGN
- 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization
- (2017) Shangqin Yuan et al. MATERIALS & DESIGN
- Direct 4D printing via active composite materials
- (2017) Zhen Ding et al. Science Advances
- 3D Printing Macroscale Engineered Materials Using Ultrasound Directed Self-Assembly and Stereolithography
- (2017) John Greenhall et al. Advanced Materials Technologies
- 3D Printed Microfluidic Device with Microporous Mn2O3-Modified Screen Printed Electrode for Real-Time Determination of Heavy Metal Ions
- (2016) Ying Hong et al. ACS Applied Materials & Interfaces
- Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite
- (2016) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Approaching the compressive modulus of articular cartilage with a decellularized cartilage-based hydrogel
- (2016) Emily C. Beck et al. Acta Biomaterialia
- Mechanical Properties, Cytocompatibility and Manufacturability of Chitosan:PEGDA Hybrid-Gel Scaffolds by Stereolithography
- (2016) Viola B. Morris et al. ANNALS OF BIOMEDICAL ENGINEERING
- Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography
- (2016) Haidong Wu et al. CERAMICS INTERNATIONAL
- Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing
- (2016) Stephanie Fanselow et al. CHEMICAL ENGINEERING SCIENCE
- Optimized polybutylene terephthalate powders for selective laser beam melting
- (2016) Jochen Schmidt et al. CHEMICAL ENGINEERING SCIENCE
- Highly enhanced thermal conductivity of thermoplastic nanocomposites with a low mass fraction of MWCNTs by a facilitated latex approach
- (2016) Shangqin Yuan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds
- (2016) F.S. Senatov et al. COMPOSITES PART B-ENGINEERING
- PCL/PHBV blended three dimensional scaffolds fabricated by fused deposition modeling and responses of chondrocytes to the scaffolds
- (2016) Wasana Kosorn et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
- (2016) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane
- (2016) Shangqin Yuan et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
- (2016) Nanya Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preparation of polypropylene microspheres for selective laser sintering via thermal-induced phase separation: Roles of liquid-liquid phase separation and crystallization
- (2016) Shao-Jie Wang et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
- (2016) Zeang Zhao et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials
- (2016) Yuanyuan Zhang et al. POLYMER COMPOSITES
- The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering
- (2016) Jiaming Bai et al. POLYMER TESTING
- Layerless fabrication with continuous liquid interface production
- (2016) Rima Janusziewicz et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Study on the selective laser sintering of a low-isotacticity polypropylene powder
- (2016) Wei Zhu et al. RAPID PROTOTYPING JOURNAL
- Airborne particulate matter classification and concentration detection based on 3D printed virtual impactor and quartz crystal microbalance sensor
- (2016) Jiuxuan Zhao et al. SENSORS AND ACTUATORS A-PHYSICAL
- Fabrication of highly conductive graphene flexible circuits by 3D printing
- (2016) Di Zhang et al. SYNTHETIC METALS
- Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction
- (2016) Fei Shen et al. International Journal of Applied Mechanics
- In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
- (2016) Erika Fantino et al. Materials
- A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites
- (2016) Wei Zhu et al. Scientific Reports
- Programming Mechanical and Physicochemical Properties of 3D Hydrogel Cellular Microcultures via Direct Ink Writing
- (2016) Joselle M. McCracken et al. Advanced Healthcare Materials
- Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering
- (2016) Nicolas Mys et al. Polymers
- Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering
- (2016) Shangqin Yuan et al. Polymers
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- 3D printed anisotropic dielectric composite with meta-material features
- (2016) D.V. Isakov et al. MATERIALS & DESIGN
- Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
- (2016) Oraib Al-Ketan et al. Advanced Materials Technologies
- Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
- (2016) F. Castles et al. Scientific Reports
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Multi-shape active composites by 3D printing of digital shape memory polymers
- (2016) Jiangtao Wu et al. Scientific Reports
- 3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials
- (2016) Yiqi Mao et al. Scientific Reports
- Multimaterial 4D Printing with Tailorable Shape Memory Polymers
- (2016) Qi Ge et al. Scientific Reports
- Stereolithography of SiOC Ceramic Microcomponents
- (2015) Erika Zanchetta et al. ADVANCED MATERIALS
- Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
- (2015) Christopher B. Highley et al. ADVANCED MATERIALS
- 3D Printing of Shape Memory Polymers for Flexible Electronic Devices
- (2015) Matt Zarek et al. ADVANCED MATERIALS
- 3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
- (2015) Kajsa Markstedt et al. BIOMACROMOLECULES
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Designing a 3-D Printing-Based Channel Emulator With Printable Electromagnetic Materials
- (2015) Xiangyang Jiao et al. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
- Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
- (2015) Song XiaoHui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten–Polycarbonate Polymer Matrix Composite for Space-Based Applications
- (2015) Corey M. Shemelya et al. JOURNAL OF ELECTRONIC MATERIALS
- An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
- (2015) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
- (2015) Shannon E. Bakarich et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Dual-Responsive Hydrogels for Direct-Write 3D Printing
- (2015) Musan Zhang et al. MACROMOLECULES
- Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
- (2015) Chia-Tze Kao et al. Materials Science & Engineering C-Materials for Biological Applications
- Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
- (2015) P. Laszczak et al. MEDICAL ENGINEERING & PHYSICS
- Thermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering
- (2015) Jiaming Bai et al. MOLECULES
- 3D stereolithography printing of graphene oxide reinforced complex architectures
- (2015) Dong Lin et al. NANOTECHNOLOGY
- Manufacture of electrical and magnetic graded and anisotropic materials for novel manipulations of microwaves
- (2015) P. S. Grant et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Processing and characterization of a polylactic acid/nanoclay composite for laser sintering
- (2015) Jiaming Bai et al. POLYMER COMPOSITES
- Fabrication of patient specific composite orbital floor implants by stereolithography
- (2015) Mike A. Geven et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
- (2015) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- Designing bioinspired composite reinforcement architectures via 3D magnetic printing
- (2015) Joshua J. Martin et al. Nature Communications
- 3D Printable Graphene Composite
- (2015) Xiaojun Wei et al. Scientific Reports
- Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography
- (2015) Laura Elomaa et al. Journal of Materials Chemistry B
- Preparation of PA12 microspheres with tunable morphology and size for use in SLS processing
- (2015) Gexia Wang et al. MATERIALS & DESIGN
- Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts
- (2015) Wei Zhu et al. MATERIALS & DESIGN
- Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
- (2015) T. J. Hinton et al. Science Advances
- 3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
- (2014) Ning Xu et al. ACS Applied Materials & Interfaces
- 3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
- (2014) Kanguk Kim et al. ACS Nano
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A global sustainability perspective on 3D printing technologies
- (2014) Malte Gebler et al. ENERGY POLICY
- Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
- (2014) S. Berretta et al. EUROPEAN POLYMER JOURNAL
- Additive Manufacturing of Dense Alumina Ceramics
- (2014) Martin Schwentenwein et al. International Journal of Applied Ceramic Technology
- Selective laser sintering of polymer biocomposites based on polymethyl methacrylate
- (2014) Rajkumar Velu et al. JOURNAL OF MATERIALS RESEARCH
- Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
- (2014) Carmen R. Rocha et al. JOURNAL OF MATERIALS RESEARCH
- Materials perspective of polymers for additive manufacturing with selective laser sintering
- (2014) Manfred Schmid et al. JOURNAL OF MATERIALS RESEARCH
- Aging behavior of thermoplastic elastomers in the laser sintering process
- (2014) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS RESEARCH
- The importance of carbon fiber to polymer additive manufacturing
- (2014) Lonnie J. Love et al. JOURNAL OF MATERIALS RESEARCH
- Preparation and laser sintering of limestone PA 12 composite
- (2014) Yanling Guo et al. POLYMER TESTING
- Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering
- (2014) Jiaming Bai et al. POLYMER TESTING
- Organically modified montmorillonite polymer nanocomposites for stereolithography building process
- (2014) C. Esposito Corcione et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- A novel process route for the production of spherical LBM polymer powders with small size and good flowability
- (2014) Jochen Schmidt et al. POWDER TECHNOLOGY
- Guest editorial
- (2014) Dave Bourell et al. RAPID PROTOTYPING JOURNAL
- A review of melt extrusion additive manufacturing processes: I. Process design and modeling
- (2014) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography
- (2014) Sigrid Schüller-Ravoo et al. Advanced Healthcare Materials
- Inkjet Printing of Quantum Dots in Photopolymer for Use in Additive Manufacturing of Nanocomposites
- (2013) Amelia M. Elliott et al. ADVANCED ENGINEERING MATERIALS
- Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
- (2013) Leon S. Dimas et al. ADVANCED FUNCTIONAL MATERIALS
- Active materials by four-dimension printing
- (2013) Qi Ge et al. APPLIED PHYSICS LETTERS
- Development of composite porous scaffolds based on poly(lactide-co-glycolide)/nano-hydroxyapatite via selective laser sintering
- (2013) Cijun Shuai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development and characterization of novel photopolymerizable formulations for stereolithography
- (2013) Carola Esposito Corcione JOURNAL OF POLYMER ENGINEERING
- Flexible and Elastic Scaffolds for Cartilage Tissue Engineering Prepared by Stereolithography Using Poly(trimethylene carbonate)-Based Resins
- (2013) Sigrid Schüller-Ravoo et al. MACROMOLECULAR BIOSCIENCE
- A Straightforward Synthesis and Structure–Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization
- (2013) Zhiquan Li et al. MACROMOLECULES
- A novel quasicrystal-resin composite for stereolithography
- (2013) Adnene Sakly et al. MATERIALS & DESIGN
- Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes
- (2013) Jiaming Bai et al. POLYMER ENGINEERING AND SCIENCE
- Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
- (2013) Qiu Li Loh et al. TISSUE ENGINEERING PART B-REVIEWS
- Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals
- (2012) Sandeep Kumar et al. ACS Applied Materials & Interfaces
- Preparation of designed poly(d,l-lactide)/nanosized hydroxyapatite composite structures by stereolithography
- (2012) A. Ronca et al. Acta Biomaterialia
- Fabrication of 3-Dimensional Cellular Constructs via Microstereolithography Using a Simple, Three-Component, Poly(Ethylene Glycol) Acrylate-Based System
- (2012) Simon J. Leigh et al. BIOMACROMOLECULES
- Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography
- (2012) Robert Gauvin et al. BIOMATERIALS
- Porous 3D modeled scaffolds of bioactive glass and photocrosslinkable poly(ε-caprolactone) by stereolithography
- (2012) Laura Elomaa et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties
- (2012) Gean V. Salmoria et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
- (2012) Jyrki Korpela et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process
- (2012) Hyo Chan Kim et al. JOURNAL OF COMPOSITE MATERIALS
- Laser intensity effect on mechanical properties of wood–plastic composite parts fabricated by selective laser sintering
- (2012) Weiliang Zeng et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Micro-Engineered 3D Scaffolds for Cell Culture Studies
- (2012) Alexandra M. Greiner et al. MACROMOLECULAR BIOSCIENCE
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
- (2012) Simon J. Leigh et al. PLoS One
- Production of polymer particles below 5μm by wet grinding
- (2012) Jochen Schmidt et al. POWDER TECHNOLOGY
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
- (2012) Amit Joe Lopes et al. RAPID PROTOTYPING JOURNAL
- Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
- (2011) Laura Elomaa et al. Acta Biomaterialia
- The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells
- (2011) Kyobum Kim et al. BIOMATERIALS
- Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering
- (2011) Chunze Yan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography
- (2011) A. Badev et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
- Preparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by Stereolithography
- (2011) Sigrid Schüller-Ravoo et al. MACROMOLECULAR BIOSCIENCE
- Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
- (2011) M. Nikzad et al. MATERIALS & DESIGN
- Biomaterials & scaffolds for tissue engineering
- (2011) Fergal J. O'Brien Materials Today
- Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering
- (2011) G.V. Salmoria et al. POLYMER TESTING
- Shape-memory polymers and their composites: Stimulus methods and applications
- (2011) Jinsong Leng et al. PROGRESS IN MATERIALS SCIENCE
- Laser sintering of polyamides and other polymers
- (2011) R.D. Goodridge et al. PROGRESS IN MATERIALS SCIENCE
- An organically modified montmorillonite/nylon‐12 composite powder for selective laser sintering
- (2011) C.Z. Yan et al. RAPID PROTOTYPING JOURNAL
- Nano‐TiO2‐modified photosensitive resin for RP
- (2011) Duan Yugang et al. RAPID PROTOTYPING JOURNAL
- A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin
- (2011) S.J. Leigh et al. SENSORS AND ACTUATORS A-PHYSICAL
- Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
- (2010) Bin Duan et al. Acta Biomaterialia
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
- (2010) Brian Derby Annual Review of Materials Research
- Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding
- (2010) Siddharth Ram Athreya et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Selective laser sintering of polyamide 12/potassium titanium whisker composites
- (2010) Jinsong Yang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly( d,l -lactide)-based resins
- (2010) Tetsu M. Seck et al. JOURNAL OF CONTROLLED RELEASE
- Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
- (2010) R.D. Goodridge et al. POLYMER TESTING
- Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
- (2009) Szilvia Eosoly et al. Acta Biomaterialia
- A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
- (2009) Ferry P.W. Melchels et al. BIOMATERIALS
- An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
- (2009) Ruth D. Goodridge et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Gelatin-based photopolymers for bone replacement materials
- (2009) Monika Schuster et al. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
- The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites
- (2009) Shih-Jung Liu et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
- (2009) Siddharth Ram Athreya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering
- (2009) G.V. Salmoria et al. POLYMER TESTING
- In vitro study of hydroxyapatite-based photocurable polymer composites prepared by laser stereolithography and supercritical fluid extraction
- (2008) John J.A. Barry et al. Acta Biomaterialia
- Acrylic Nanocomposite Resins for Use in Stereolithography and Structural Light Modulation Based Rapid Prototyping and Rapid Manufacturing Technologies
- (2008) Matthias Gurr et al. ADVANCED FUNCTIONAL MATERIALS
- Simulation of random packing of spherical particles with different size distributions
- (2008) Yu Shi et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Synthesis of Ca–P nanoparticles and fabrication of Ca–P/PHBV nanocomposite microspheres for bone tissue engineering applications
- (2008) B. Duan et al. APPLIED SURFACE SCIENCE
- Fumaric Acid Monoethyl Ester-Functionalized Poly(d,l-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography
- (2008) Janine Jansen et al. BIOMACROMOLECULES
- Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
- (2008) Hung-Jen Yen et al. BIOMEDICAL MICRODEVICES
- Experimental investigation into the selective laser sintering of high-impact polystyrene
- (2008) Yusheng Shi et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Properties of porous structures prepared by stereolithography using a polylactide resin
- (2008) F.P.W. Melchels et al. JOURNAL OF CONTROLLED RELEASE
- Selective laser sintering of HIPS and investment casting technology
- (2008) Jinsong Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
- (2008) Phung Xuan Lan et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
- (2008) Yan Chunze et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography
- (2008) Jin Woo Lee et al. MICROELECTRONIC ENGINEERING
- Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape memory polymer networks
- (2008) David L. Safranski et al. POLYMER
- Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior
- (2008) G.V. Salmoria et al. POLYMER TESTING
- Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering
- (2007) Haseung Chung et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now