Printable Organic Semiconductors for Radiation Detection: From Fundamentals to Fabrication and Functionality

A review of non-fullerene polymer solar cells: from device physics to morphology control

(2019) Robert S Gurney et al.   REPORTS ON PROGRESS IN PHYSICS

Role of Stabilizing Surfactants on Capacitance, Charge, and Ion Transport in Organic Nanoparticle-Based Electronic Devices

(2019) Mohsen Ameri et al.   ACS Applied Materials & Interfaces

Printable ionizing radiation sensors fabricated from nanoparticulate blends of organic scintillators and polymer semiconductors

(2019) Darcie Anderson et al.   MRS Communications

Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices

(2019) Matthew J Griffith et al.   NANOTECHNOLOGY

Indirect X-ray Detectors Based on Inkjet-Printed Photodetectors with a Screen-Printed Scintillator Layer

(2018) Juliana Oliveira et al.   ACS Applied Materials & Interfaces

Robot-Based High-Throughput Engineering of Alcoholic Polymer: Fullerene Nanoparticle Inks for an Eco-Friendly Processing of Organic Solar Cells

(2018) Chen Xie et al.   ACS Applied Materials & Interfaces

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

(2018) Shaoqing Zhang et al.   ADVANCED MATERIALS

Stretchable scintillator composites for indirect X-ray detectors

(2018) J. Oliveira et al.   COMPOSITES PART B-ENGINEERING

Environmentally friendly preparation of nanoparticles for organic photovoltaics

(2018) Xun Pan et al.   ORGANIC ELECTRONICS

The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices

(2018) Mohammed F. Al-Mudhaffer et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High sensitivity organic inorganic hybrid X-ray detectors with direct transduction and broadband response

(2018) H. M. Thirimanne et al.   Nature Communications

Overcoming Microstructural Limitations in Water Processed Organic Solar Cells by Engineering Customized Nanoparticulate Inks

(2018) Chen Xie et al.   Advanced Energy Materials

Miscibility-Function Relations in Organic Solar Cells: Significance of Optimal Miscibility in Relation to Percolation

(2018) Long Ye et al.   Advanced Energy Materials

Organic electrochemical transistors

(2018) Jonathan Rivnay et al.   Nature Reviews Materials

Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications

(2018) Natalie P. Holmes et al.   CHEMISTRY OF MATERIALS

Organic Bioelectronics: Materials and Biocompatibility

(2018) Krishna Feron et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Organic Transistor-Based Chemical Sensors for Wearable Bioelectronics

(2018) Moo Yeol Lee et al.   ACCOUNTS OF CHEMICAL RESEARCH

Nonhalogenated Solvent-Processed All-Polymer Solar Cells over 7.4% Efficiency from Quinoxaline-Based Polymers

(2018) Liuyang Zhou et al.   ACS Applied Materials & Interfaces

Boosting Direct X-Ray Detection in Organic Thin Films by Small Molecules Tailoring

(2018) Andrea Ciavatti et al.   ADVANCED FUNCTIONAL MATERIALS

Achieving Balanced Crystallinity of Donor and Acceptor by Combining Blade-Coating and Ternary Strategies in Organic Solar Cells

(2018) Lin Zhang et al.   ADVANCED MATERIALS

Overcoming efficiency and stability limits in water-processing nanoparticular organic photovoltaics by minimizing microstructure defects

(2018) Chen Xie et al.   Nature Communications

Stretchable and ultraflexible organic electronics

(2017) Darren J. Lipomi et al.   MRS BULLETIN

Custom-Shaped Organic Photovoltaic Modules—Freedom of Design by Printing

(2017) M. Välimäki et al.   Nanoscale Research Letters

Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes

(2017) Naoji Matsuhisa et al.   NATURE MATERIALS

Ternary blends to achieve well-developed nanoscale morphology in organic bulk heterojunction solar cells

(2017) Hyojung Cha et al.   ORGANIC ELECTRONICS

Advanced nanomaterial inks for screen-printed chemical sensors

(2017) Zhenyu Chu et al.   SENSORS AND ACTUATORS B-CHEMICAL

Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend

(2017) Xiaodan Gu et al.   Advanced Energy Materials

Neutron Radiation Tolerance of Two Benchmark Thiophene-Based Conjugated Polymers: the Importance of Crystallinity for Organic Avionics

(2017) G. M. Paternò et al.   Scientific Reports

Diketopyrrolopyrrole-based polymer:fullerene nanoparticle films with thermally stable morphology for organic photovoltaic applications

(2017) Natalie P. Holmes et al.   MRS Communications

Engineering the vertical concentration distribution within the polymer:fullerene blends for high performance inverted polymer solar cells

(2017) Yaping Wang et al.   Journal of Materials Chemistry A

A universal approach to improve electron mobility without significant enlarging phase separation in IDT-based non-fullerene acceptor organic solar cells

(2017) Lin Zhang et al.   Nano Energy

Custom-Shaped Organic Photovoltaic Modules—Freedom of Design by Printing

(2017) M. Välimäki et al.   Nanoscale Research Letters

A unified understanding of charge transport in organic semiconductors: the importance of attenuated delocalization for the carriers

(2017) Chuan Liu et al.   Materials Horizons

A Highly Sensitive, Direct X-Ray Detector Based on a Low-Voltage Organic Field-Effect Transistor

(2017) Stefano Lai et al.   Advanced Electronic Materials

Flow-Directed Crystallization for Printed Electronics

(2016) Ge Qu et al.   ACCOUNTS OF CHEMICAL RESEARCH

Activation of Organic Photovoltaic Light Detectors Using Bend Leakage from Optical Fibers

(2016) Matthew J. Griffith et al.   ACS Applied Materials & Interfaces

Organic Bioelectronics: Bridging the Signaling Gap between Biology and Technology

(2016) Daniel T. Simon et al.   CHEMICAL REVIEWS

Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials

(2016) L. Lucera et al.   Energy & Environmental Science

Open circuit voltage of organic solar cells: an in-depth review

(2016) Naveen Kumar Elumalai et al.   Energy & Environmental Science

Combining Printing, Coating, and Vacuum Deposition on the Roll-to-Roll Scale: A Hybrid Organic Photovoltaics Fabrication

(2016) Matthew J. Griffith et al.   IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS

Inkjet printed organic electrochemical transistors with highly conducting polymer electrolytes

(2016) Mónica Afonso et al.   JOURNAL OF APPLIED PHYSICS

Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

(2016) Derya Baran et al.   NATURE MATERIALS

Solution-processed organic tandem solar cells with power conversion efficiencies >12%

(2016) Miaomiao Li et al.   Nature Photonics

Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing

(2016) Sivaramakrishnan Sankaran et al.   ORGANIC ELECTRONICS

Fully roll-to-roll prepared organic solar cells in normal geometry with a sputter-coated aluminium top-electrode

(2016) Thomas R. Andersen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications

(2016) Z. Ding et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Direct X-ray photoconversion in flexible organic thin film devices operated below 1 V

(2016) Laura Basiricò et al.   Nature Communications

Review of organic light-emitting diodes with thermally activated delayed fluorescence emitters for energy-efficient sustainable light sources and displays

(2016) Daniel Volz   Journal of Photonics for Energy

Nano-pathways: Bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics

(2016) Natalie P. Holmes et al.   Nano Energy

An Inkjet-Printed, Ultralow Voltage, Flexible Organic Field Effect Transistor

(2016) Silvia Conti et al.   Advanced Materials Technologies

The Organic Power Transistor: Roll-to-Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics

(2015) Francesco Pastorelli et al.   ADVANCED ENGINEERING MATERIALS

Ionizing Radiation Detectors Based on Solution-Grown Organic Single Crystals

(2015) Beatrice Fraboni et al.   ADVANCED FUNCTIONAL MATERIALS

Toward Low-Voltage and Bendable X-Ray Direct Detectors Based on Organic Semiconducting Single Crystals

(2015) Andrea Ciavatti et al.   ADVANCED MATERIALS

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells

(2015) Kyeongil Hwang et al.   ADVANCED MATERIALS

Printable organic thin film transistors for glucose detection incorporating inkjet-printing of the enzyme recognition element

(2015) D. Elkington et al.   APPLIED PHYSICS LETTERS

Recent Advances in Bulk Heterojunction Polymer Solar Cells

(2015) Luyao Lu et al.   CHEMICAL REVIEWS

On the Glass Transition of Polymer Semiconductors and Its Impact on Polymer Solar Cell Stability

(2015) Christian Müller   CHEMISTRY OF MATERIALS

X-ray imaging with scintillator-sensitized hybrid organic photodetectors

(2015) Patric Büchele et al.   Nature Photonics

Charge transport and recombination in heterostructure organic light emitting transistors

(2015) Fatemeh Maasoumi et al.   ORGANIC ELECTRONICS

Probing the origin of photocurrent in nanoparticulate organic photovoltaics

(2015) Natalie P. Holmes et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Review of recent progress in multilayer solution-processed organic light-emitting diodes

(2015) Szuheng Ho et al.   Journal of Photonics for Energy

Screen-printed organic electrochemical transistors for metabolite sensing

(2015) Gaëtan Scheiblin et al.   MRS Communications

Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC70BM blend

(2015) Rickard Hansson et al.   Journal of Materials Chemistry A

High efficiency, fully inkjet printed organic solar cells with freedom of design

(2015) T. M. Eggenhuisen et al.   Journal of Materials Chemistry A

Development of Lab-to-Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells

(2015) Markus Hösel et al.   Energy Technology

Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors

(2015) Yulia Galagan et al.   Energy Technology

Roll-to-Roll Sputter Coating of Aluminum Cathodes for Large-Scale Fabrication of Organic Photovoltaic Devices

(2015) Matthew J. Griffith et al.   Energy Technology

Solar Trees: First Large-Scale Demonstration of Fully Solution Coated, Semitransparent, Flexible Organic Photovoltaic Modules

(2015) Stephane Berny et al.   Advanced Science

Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating

(2014) Feng Liu et al.   ADVANCED MATERIALS

Printable sensors for explosive detonation

(2014) Matthew J. Griffith et al.   APPLIED PHYSICS LETTERS

Morphology control strategies for solution-processed organic semiconductor thin films

(2014) Ying Diao et al.   Energy & Environmental Science

Organic semiconducting single crystals as solid-state sensors for ionizing radiation

(2014) Beatrice Fraboni et al.   FARADAY DISCUSSIONS

Response of organic photodiode fabricated directly on plastic scintillator to X-rays

(2014) Eiji Takada et al.   JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY

Multiscale Active Layer Morphologies for Organic Photovoltaics Through Self-Assembly of Nanospheres

(2014) Timothy S. Gehan et al.   NANO LETTERS

Addressing challenges

(2014) John E. Anthony   NATURE MATERIALS

Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations

(2014) Florian Machui et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents

(2014) Deepak Kaduwal et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation

(2014) Tomi Hassinen et al.   THIN SOLID FILMS

Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films

(2014) Kenjiro Fukuda et al.   Nature Communications

All-organic optoelectronic sensor for pulse oximetry

(2014) Claire M. Lochner et al.   Nature Communications

Fabrication conditions for efficient organic photovoltaic cells from aqueous dispersions of nanoparticles

(2014) Monojit Bag et al.   RSC Advances

Trap-Limited Exciton Diffusion in Organic Semiconductors

(2013) Oleksandr V. Mikhnenko et al.   ADVANCED MATERIALS

25th Anniversary Article: Rise to Power - OPV-Based Solar Parks

(2013) Frederik C. Krebs et al.   ADVANCED MATERIALS

From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective

(2013) Riccardo Po et al.   Energy & Environmental Science

Aerosol-Printed Strain Sensor Using PEDOT:PSS

(2013) Bradley Thompson et al.   IEEE SENSORS JOURNAL

Cation Exchange at Semiconducting Oxide Surfaces: Origin of Light-Induced Performance Increases in Porphyrin Dye-Sensitized Solar Cells

(2013) Matthew J. Griffith et al.   Journal of Physical Chemistry C

Additives for morphology control in high-efficiency organic solar cells

(2013) Hsueh-Chung Liao et al.   Materials Today

Single-crystal growth of organic semiconductors

(2013) Hui Jiang et al.   MRS BULLETIN

Efficient charge generation by relaxed charge-transfer states at organic interfaces

(2013) Koen Vandewal et al.   NATURE MATERIALS

Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solarcells

(2013) Soonil Hong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes

(2013) Natalie P. Holmes et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A projection of commercial-scale organic photovoltaic module costs

(2013) Cara J. Mulligan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Surfactant-free nanoparticulate organic photovoltaics

(2013) Darmawati Darwis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime

(2013) Jon E. Carlé et al.   Journal of Materials Chemistry C

Organic Semiconducting Single Crystals as Next Generation of Low-Cost, Room-Temperature Electrical X-ray Detectors

(2012) Beatrice Fraboni et al.   ADVANCED MATERIALS

Ultra-low voltage, organic thin film transistors fabricated on plastic substrates by a highly reproducible process

(2012) P. Cosseddu et al.   APPLIED PHYSICS LETTERS

Continuous Flow Synthesis of Organic Electronic Materials ? Case Studies in Methodology Translation and Scale-up

(2012) Helga Seyler et al.   AUSTRALIAN JOURNAL OF CHEMISTRY

All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum

(2012) Thue T. Larsen-Olsen et al.   Energy & Environmental Science

Roll-to-Roll fabrication of large area functional organic materials

(2012) Roar R. Søndergaard et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Strategies for controlling the active layer morphologies in OPVs

(2012) Gavvalapalli Nagarjuna et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Flexible, All-Organic Chemiresistor for Detecting Chemically Aggressive Vapors

(2012) Srikanth Ammu et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

High-Mobility Field-Effect Transistors from Large-Area Solution-Grown Aligned C60 Single Crystals

(2012) Hanying Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Studying Polymer/Fullerene Intermixing and Miscibility in Laterally Patterned Films with X-Ray Spectromicroscopy

(2012) Xiaoxi He et al.   Small

Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices

(2012) Syahrul Ulum et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Doping-Induced Screening of the Built-in-Field in Organic Solar Cells: Effect on Charge Transport and Recombination

(2012) Ardalan Armin et al.   Advanced Energy Materials

Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration

(2012) Dechan Angmo et al.   Advanced Energy Materials

A stable solution-processed polymer semiconductor with record high-mobility for printed transistors

(2012) Jun Li et al.   Scientific Reports

A New Model for the Morphology of P3HT/PCBM Organic Photovoltaics from Small-Angle Neutron Scattering: Rivers and Streams

(2011) Wen Yin et al.   ACS Nano

Controlled Deposition of a High-Performance Small-Molecule Organic Single-Crystal Transistor Array by Direct Ink-Jet Printing

(2011) Yong-Hoon Kim et al.   ADVANCED MATERIALS

Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer

(2011) Yanming Sun et al.   ADVANCED MATERIALS

The OE-A OPV demonstrator anno domini 2011

(2011) Frederik C. Krebs et al.   Energy & Environmental Science

Solar cells with one-day energy payback for the factories of the future

(2011) Nieves Espinosa et al.   Energy & Environmental Science

Pulse Shape Discrimination in Impure and Mixed Single-Crystal Organic Scintillators

(2011) Natalia Zaitseva et al.   IEEE TRANSACTIONS ON NUCLEAR SCIENCE

In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells

(2011) Neil D. Treat et al.   JOURNAL OF MATERIALS CHEMISTRY

Organic Electronics at the Interface with Biology

(2011) Róisín M. Owens et al.   MRS BULLETIN

Inkjet printing of single-crystal films

(2011) Hiromi Minemawari et al.   NATURE

X-ray radiation damage of organic semiconductor thin films during grazing incidence diffraction experiments

(2011) A. Neuhold et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

High charge-carrier mobilities in blends of poly(triarylamine) and TIPS-pentacene leading to better performing X-ray sensors

(2011) Akarin Intaniwet et al.   ORGANIC ELECTRONICS

Morphology-Dependent Trap Formation in High Performance Polymer Bulk Heterojunction Solar Cells

(2011) Zach M. Beiley et al.   Advanced Energy Materials

Achieving a Stable Time Response in Polymeric Radiation Sensors under Charge Injection by X-rays

(2010) Akarin Intaniwet et al.   ACS Applied Materials & Interfaces

Influence of Molecular Weight on the Performance of Organic Solar Cells Based on a Fluorene Derivative

(2010) Christian Müller et al.   ADVANCED FUNCTIONAL MATERIALS

Effects of Thermal Annealing Upon the Morphology of Polymer-Fullerene Blends

(2010) Eric Verploegen et al.   ADVANCED FUNCTIONAL MATERIALS

A Facile Route to Polymer Solar Cells with Optimum Morphology Readily Applicable to a Roll-to-Roll Process without Sacrificing High Device Performances

(2010) Hui Joon Park et al.   ADVANCED MATERIALS

Charge Photogeneration in Organic Solar Cells

(2010) Tracey M. Clarke et al.   CHEMICAL REVIEWS

Inkjet printing for flexible electronics: Materials, processes and equipments

(2010) ZhouPing Yin et al.   CHINESE SCIENCE BULLETIN

Charge Carrier Lifetime and Recombination in Bulk Heterojunction Solar Cells

(2010) Almantas Pivrikas et al.   IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS

Stability of X-Ray Detectors Based on Organic Photovoltaic Devices

(2010) James W. Kingsley et al.   IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS

Application of solution techniques for rapid growth of organic crystals

(2010) Natalia Zaitseva et al.   JOURNAL OF CRYSTAL GROWTH

Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing

(2010) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

Molecular Miscibility of Polymer−Fullerene Blends

(2010) Brian A. Collins et al.   Journal of Physical Chemistry Letters

Observation of long-range exciton diffusion in highly ordered organic semiconductors

(2010) H. Najafov et al.   NATURE MATERIALS

Radiation hardness of polysiloxane scintillators analyzed by ion beam induced luminescence

(2010) A. Quaranta et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

Fully gravure and ink-jet printed high speed pBTTT organic thin film transistors

(2010) Alejandro de la Fuente Vornbrock et al.   ORGANIC ELECTRONICS

Charge carrier photogeneration and decay dynamics in the poly(2,7-carbazole) copolymer PCDTBT and in bulk heterojunction composites withPC70BM

(2010) Minghong Tong et al.   PHYSICAL REVIEW B

Polymer–fullerene bulk heterojunction solar cells

(2010) Carsten Deibel et al.   REPORTS ON PROGRESS IN PHYSICS

ITO-free flexible organic solar cells with printed current collecting grids

(2010) Yulia Galagan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Structural Complexities in the Active Layers of Organic Electronics

(2010) Stephanie S. Lee et al.   Annual Review of Chemical and Biomolecular Engineering

Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend

(2010) Neil D. Treat et al.   Advanced Energy Materials

Determining ionizing radiation using sensors based on organic semiconducting material

(2009) Harshil N. Raval et al.   APPLIED PHYSICS LETTERS

New Organic Crystals for Pulse Shape Discrimination

(2009) Giulia Hull et al.   IEEE TRANSACTIONS ON NUCLEAR SCIENCE

Characterization of thick film poly(triarylamine) semiconductor diodes for direct x-ray detection

(2009) Akarin Intaniwet et al.   JOURNAL OF APPLIED PHYSICS

Detecting 6MV X-rays using an organic photovoltaic device

(2009) James W. Kingsley et al.   ORGANIC ELECTRONICS

Controlled solution deposition and systematic study of charge-transport anisotropy in single crystal and single-crystal textured TIPS pentacene thin films

(2009) Jihua Chen et al.   ORGANIC ELECTRONICS

Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells

(2009) Lars Blankenburg et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

The Effect of Poly(3-hexylthiophene) Molecular Weight on Charge Transport and the Performance of Polymer:Fullerene Solar Cells

(2008) Amy M. Ballantyne et al.   ADVANCED FUNCTIONAL MATERIALS

High‐Performance Organic Thin‐Film Transistors through Solution‐Sheared Deposition of Small‐Molecule Organic Semiconductors

(2008) Héctor A. Becerril et al.   ADVANCED MATERIALS

X-ray stability and response of polymeric photodiodes for imaging applications

(2008) Panagiotis E. Keivanidis et al.   APPLIED PHYSICS LETTERS

A polymer/fullerene based photodetector with extremely low dark current for x-ray medical imaging applications

(2008) T. Agostinelli et al.   APPLIED PHYSICS LETTERS

Small-molecule solar cells—status and perspectives

(2008) M Riede et al.   NANOTECHNOLOGY

Radiation induced damage and recovery in poly(3-hexyl thiophene) based polymer solar cells

(2008) Gang Li et al.   NANOTECHNOLOGY

Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic

(2008) Jeong Ho Cho et al.   NATURE MATERIALS

Anisotropic charge transport in organic single crystals based on dipolar molecules

(2008) B. Fraboni et al.   ORGANIC ELECTRONICS

Organic transistors manufactured using inkjet technology with subfemtoliter accuracy

(2008) Tsuyoshi Sekitani et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A Rubberlike Stretchable Active Matrix Using Elastic Conductors

(2008) Tsuyoshi Sekitani et al.   SCIENCE