Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors

R2R-printed inverted OPV modules – towards arbitrary patterned designs

(2015) M. Välimäki et al.   Nanoscale

Layout flexibility for sheet-to-sheet produced flexible ITO-free organic solar modules with organic functional layers slot die coated under ambient atmospheric conditions

(2015) Deepak Kaduwal et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Ultimate form freedom in thin film solar cells by postmanufacture laser-based processing

(2015) Jan Gilot et al.   Journal of Photonics for Energy

Development of Lab-to-Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells

(2015) Markus Hösel et al.   Energy Technology

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

(2014) Thomas R. Andersen et al.   Energy & Environmental Science

Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors

(2014) G. D. Spyropoulos et al.   Energy & Environmental Science

High precision processing of flexible P3HT/PCBM modules with geometric fill factor over 95%

(2014) Peter Kubis et al.   ORGANIC ELECTRONICS

Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer

(2014) Pälvi Apilo et al.   PROGRESS IN PHOTOVOLTAICS

Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations

(2014) Florian Machui et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents

(2014) Deepak Kaduwal et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

2D Characterization of OPV from Single and Tandem Cells to Fully Roll-to-Roll Processed Modules with and without Electrical Contact

(2014) Frederik C. Krebs et al.   Advanced Optical Materials

Towards industrialization of polymer solar cells: material processing for upscaling

(2014) Ignasi Burgués-Ceballos et al.   Journal of Materials Chemistry A

25th Anniversary Article: Rise to Power - OPV-Based Solar Parks

(2013) Frederik C. Krebs et al.   ADVANCED MATERIALS

Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells

(2013) Chu-Chen Chueh et al.   Energy & Environmental Science

From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective

(2013) Riccardo Po et al.   Energy & Environmental Science

Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings

(2013) Marcel Schmitt et al.   Journal of Coatings Technology and Research

Fluid-dynamic properties and wetting behavior of coating inks for roll-to-roll production of polymer-based solar cells

(2013) L. Wengeler et al.   Journal of Coatings Technology and Research

Predicting Morphologies of Solution Processed Polymer:Fullerene Blends

(2013) Sandra Kouijzer et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Simulation of Surface-Directed Phase Separation in a Solution-Processed Polymer/PCBM Blend

(2013) Jasper J. Michels et al.   MACROMOLECULES

Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices

(2013) H J van de Wiel et al.   NANOTECHNOLOGY

Dependence of opto-electric properties of (semi-)conducting films in polymer based solar cells on viscous shear during the coating process

(2013) Lukas Wengeler et al.   ORGANIC ELECTRONICS

Highly efficient thieno[3,4-c]pyrrole-4,6-dione-based solar cells processed from non-chlorinated solvent

(2013) Badrou Réda Aïch et al.   ORGANIC ELECTRONICS

Patterning of organic photovoltaic modules by ultrafast laser

(2013) Peter Kubis et al.   PROGRESS IN PHOTOVOLTAICS

Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics

(2013) C. Koidis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A projection of commercial-scale organic photovoltaic module costs

(2013) Cara J. Mulligan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Scaling Up ITO-Free Solar Cells

(2013) Yulia Galagan et al.   Advanced Energy Materials

OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools

(2013) Nieves Espinosa et al.   Journal of Materials Chemistry A

Investigation of surface deformation during drying of thin polymer films due to Marangoni convection

(2012) Philipp Cavadini et al.   CHEMICAL ENGINEERING AND PROCESSING

Comparison of large scale coating techniques for organic and hybrid films in polymer based solar cells

(2012) Lukas Wengeler et al.   CHEMICAL ENGINEERING AND PROCESSING

Roll-to-Roll fabrication of large area functional organic materials

(2012) Roar R. Søndergaard et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Roll-to-roll fabrication of polymer solar cells

(2012) Roar Søndergaard et al.   Materials Today

Determination of the P3HT:PCBM solubility parameters via a binary solvent gradient method: Impact of solubility on the photovoltaic performance

(2012) Florian Machui et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

The OE-A OPV demonstrator anno domini 2011

(2011) Frederik C. Krebs et al.   Energy & Environmental Science

Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties

(2011) Valerio Zardetto et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Determination of Solubility Parameters for Organic Semiconductor Formulations

(2011) Florian Machui et al.   MACROMOLECULAR CHEMISTRY AND PHYSICS

High performance bulk-heterojunction organic solar cells fabricated with non-halogenated solvent processing

(2011) Choong-Do Park et al.   ORGANIC ELECTRONICS

ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating

(2011) B. Zimmermann et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing

(2011) Nieves Espinosa et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells

(2011) Benjamin Schmidt-Hansberg et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Technology development for roll-to-roll production of organic photovoltaics

(2010) Yulia Galagan et al.   CHEMICAL ENGINEERING AND PROCESSING

Upscaling of polymer solar cell fabrication using full roll-to-roll processing

(2010) Frederik C. Krebs et al.   Nanoscale