Recent Advances in Printed Capacitive Sensors

Shear-Force Sensors on Flexible Substrates Using Inkjet Printing

(2019) Andreas Albrecht et al.   Journal of Sensors

Design, fabrication and characterization of capacitive humidity sensors based on emerging flexible technologies

(2019) Francisco J. Romero et al.   SENSORS AND ACTUATORS B-CHEMICAL

Cost-effective PEDOT:PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer

(2019) Rivadeneyra et al.   Polymers

Screen-Printed Chipless Wireless Temperature Sensor

(2019) Andreas Albrecht et al.   IEEE SENSORS JOURNAL

Low-Cost Gas Sensing: Dynamic Self-Compensation of Humidity in CNT-Based Devices

(2019) Aniello Falco et al.   ACS Sensors

Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications

(2018) Francisco J. Romero et al.   SENSORS AND ACTUATORS A-PHYSICAL

Asymmetric enhanced surface interdigitated electrode capacitor with two out-of-plane electrodes

(2018) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS B-CHEMICAL

In-Depth Study of Laser Diode Ablation of Kapton Polyimide for Flexible Conductive Substrates

(2018) Francisco Romero et al.   Nanomaterials

Highly Stretchable Capacitive Sensor with Printed Carbon Black Electrodes on Barium Titanate Elastomer Composite

(2018) Eshwar Cholleti et al.   SENSORS

Low-Cost Inkjet Printing Technology for the Rapid Prototyping of Transducers

(2017) Bruno Andò et al.   SENSORS

Paper as Active Layer in Inkjet-Printed Capacitive Humidity Sensors

(2017) et al.   SENSORS

All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity

(2016) Shawkat Ali et al.   CARBON

Wearable Potentiometric Sensors Based on Commercial Carbon Fibres for Monitoring Sodium in Sweat

(2016) Marc Parrilla et al.   ELECTROANALYSIS

A Low-Cost Accelerometer Developed by Inkjet Printing Technology

(2016) Bruno Ando et al.   IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

Capacitive wearable tactile sensor based on smart textile substrate with carbon black /silicone rubber composite dielectric

(2016) Xiaohui Guo et al.   MEASUREMENT SCIENCE and TECHNOLOGY

Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis

(2016) Wei Gao et al.   NATURE

A graphene-based electrochemical device with thermoresponsive microneedles for diabetes monitoring and therapy

(2016) Hyunjae Lee et al.   Nature Nanotechnology

Printed electrodes structures as capacitive humidity sensors: A comparison

(2016) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS A-PHYSICAL

A Textile-Based Stretchable Multi-Ion Potentiometric Sensor

(2016) Marc Parrilla et al.   Advanced Healthcare Materials

Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns

(2016) Andreas Albrecht et al.   Journal of Materials Chemistry C

Integration of a Thin Film PDMS-Based Capacitive Sensor for Tactile Sensing in an Electronic Skin

(2016) Sara El-Molla et al.   Journal of Sensors

Self-Activated Transparent All-Graphene Gas Sensor with Endurance to Humidity and Mechanical Bending

(2015) Yeon Hoo Kim et al.   ACS Nano

Textile-based sampling for potentiometric determination of ions

(2015) Grzegorz Lisak et al.   ANALYTICA CHIMICA ACTA

Wearable temporary tattoo sensor for real-time trace metal monitoring in human sweat

(2015) Jayoung Kim et al.   ELECTROCHEMISTRY COMMUNICATIONS

Cantilever Fabrication by a Printing and Bonding Process

(2015) Almudena Rivadeneyra et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Fabrication of digital microfluidic devices on flexible paper-based and rigid substrates via screen printing

(2015) Mohamed Yafia et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor

(2015) Yunsik Joo et al.   Nanoscale

Inkjet and microcontact printing of functional materials on foil for the fabrication of pixel-like capacitive vapor microsensors

(2015) Francisco Molina-Lopez et al.   ORGANIC ELECTRONICS

Development of Fabric-Based Chemical Gas Sensors for Use as Wearable Electronic Noses

(2015) Thara Seesaard et al.   SENSORS

Fabrication of Capacitive Acoustic Resonators Combining 3D Printing and 2D Inkjet Printing Techniques

(2015) Rubaiyet Haque et al.   SENSORS

Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate

(2015) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS A-PHYSICAL

Highly sensitive and selective carbon nanotube-based gas sensor arrays functionalized with different metallic nanoparticles

(2015) Ahmed Abdelhalim et al.   SENSORS AND ACTUATORS B-CHEMICAL

Highly selective flexible tactile strain and temperature sensors against substrate bending for an artificial skin

(2015) Kenichiro Kanao et al.   RSC Advances

A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors

(2015) Wookyu Lee et al.   Scientific Reports

Fully-Sprayed and Flexible Organic Photodiodes with Transparent Carbon Nanotube Electrodes

(2014) Aniello Falco et al.   ACS Applied Materials & Interfaces

Fully Printed Flexible Fingerprint-like Three-Axis Tactile and Slip Force and Temperature Sensors for Artificial Skin

(2014) Shingo Harada et al.   ACS Nano

A novel electrode structure compared with interdigitated electrodes as capacitive sensor

(2014) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS B-CHEMICAL

A thin all-elastomeric capacitive pressure sensor array based on micro-contact printed elastic conductors

(2014) Su-Jeong Woo et al.   Journal of Materials Chemistry C

Fully Inkjet-Printed Organic Photodetectors with High Quantum Yield

(2013) G. Azzellino et al.   ADVANCED MATERIALS

Fabrication of co-planar screen printed microband electrodes

(2013) Jonathan P. Metters et al.   ANALYST

Design of Chipless RFID Tags Printed on Paper by Flexography

(2013) Arnaud Vena et al.   IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION

Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires

(2013) Shanshan Yao et al.   Nanoscale

Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring

(2013) Gregor Schwartz et al.   Nature Communications

Back-gated spray-deposited carbon nanotube thin film transistors operated in electrolytic solutions: an assessment towards future biosensing applications

(2013) A. M. Münzer et al.   Journal of Materials Chemistry B

Recent developments and applications of screen-printed electrodes in environmental assays—A review

(2012) Meng Li et al.   ANALYTICA CHIMICA ACTA

Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz

(2012) Hyejin Park et al.   NANOTECHNOLOGY

Silicon nanomembranes for fingertip electronics

(2012) Ming Ying et al.   NANOTECHNOLOGY

Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors

(2012) M. F. El-Kady et al.   SCIENCE

All additive inkjet printed humidity sensors on plastic substrate

(2012) F. Molina-Lopez et al.   SENSORS AND ACTUATORS B-CHEMICAL

Towards fully printed capacitive gas sensors on flexible PET substrates based on Ag interdigitated transducers with increased stability

(2012) Ulrike Altenberend et al.   SENSORS AND ACTUATORS B-CHEMICAL

Organic photovoltaic modules fabricated by an industrial gravure printing proofer

(2012) Junliang Yang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Inkjet-printed sensors: a useful approach for low cost, rapid prototyping [Instrumentation Notes]

(2011) Bruno Ando et al.   IEEE INSTRUMENTATION & MEASUREMENT MAGAZINE

Inkjet Printed Silver Nanoparticle Humidity Sensor With Memory Effect on Paper

(2011) Henrik Andersson et al.   IEEE SENSORS JOURNAL

Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes

(2011) Darren J. Lipomi et al.   Nature Nanotechnology

Development of capacitive sensor for measuring soil water content

(2011) Alan K. Rêgo Segundo et al.   Engenharia Agricola

Tunable Carbon Nanotube Thin-Film Transistors Produced Exclusively via Inkjet Printing

(2010) Haruya Okimoto et al.   ADVANCED MATERIALS

Fabrication of Polyaniline-Based Gas Sensors Using Piezoelectric Inkjet and Screen Printing for the Detection of Hydrogen Sulfide

(2010) Karl Crowley et al.   IEEE SENSORS JOURNAL

Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials

(2010) Jolke Perelaer et al.   JOURNAL OF MATERIALS CHEMISTRY

Soft lithography for micro- and nanoscale patterning

(2010) Dong Qin et al.   Nature Protocols

Spray deposition of organic semiconducting thin-films: Towards the fabrication of arbitrary shaped organic electronic devices

(2010) Alaa Abdellah et al.   ORGANIC ELECTRONICS

Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics

(2009) D. Sung et al.   IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES

Patterning conductive PDMS nanocomposite in an elastomer using microcontact printing

(2009) Chao-Xuan Liu et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Tactile sensors based on conductive polymers

(2009) Julián Castellanos-Ramos et al.   MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS

Ultrasonic spray deposition for production of organic solar cells

(2008) K. Xerxes Steirer et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles

(2008) K CROWLEY et al.   TALANTA