Friction stir lap welding of AA6061 aluminium alloy with a graphene interlayer

Surface mechanical and self-lubricating properties of MWCNT impregnated aluminium surfaces

(2019) Baidehish Sahoo et al.   SURFACE ENGINEERING

Particulate metal matrix composites and their fabrication via friction stir processing – a review

(2019) Padmakumar A. Bajakke et al.   MATERIALS AND MANUFACTURING PROCESSES

Effect of graphene interlayer on resistance spot welded AISI-1008 steel joints

(2019) Tanmoy Das et al.   Materials Research Express

Effect of exfoliated few-layered graphene on corrosion and mechanical behaviour of the graphitized Al–SiC surface composite fabricated by FSP

(2019) Abhishek Sharma et al.   BULLETIN OF MATERIALS SCIENCE

Aluminum Matrix Composites Reinforced with Graphene: A Review on Production, Microstructure, and Properties

(2019) Nima Seyed Pourmand et al.   CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES

Fabrication of bulk aluminum-graphene nanocomposite through friction stir alloying

(2019) Abhishek Sharma et al.   JOURNAL OF COMPOSITE MATERIALS

A review of processing techniques for graphene-reinforced metal matrix composites

(2019) Abqaat Naseer et al.   MATERIALS AND MANUFACTURING PROCESSES

Surface modification of Al6061-SiC surface composite through impregnation of graphene, graphite & carbon nanotubes via FSP: A tribological study

(2019) Abhishek Sharma et al.   SURFACE & COATINGS TECHNOLOGY

Tribological characteristics of aluminium-CNT/graphene/graphite surface nanocomposites: a comparative study

(2019) Baidehish Sahoo et al.   Surface Topography-Metrology and Properties

Surface alteration of aluminium alloy by an exfoliated graphitic tribolayer during friction surfacing using a consumable graphite rich tool

(2019) ABHISHEK SHARMA et al.   Surface Topography-Metrology and Properties

Multi-layer graphene reinforced aluminum – Manufacturing of high strength composite by friction stir alloying

(2018) Saurabh Dixit et al.   COMPOSITES PART B-ENGINEERING

Particle size and shape effects on the surface mechanical properties of aluminium coated with carbonaceous materials

(2018) Baidehish Sahoo et al.   JOURNAL OF COMPOSITE MATERIALS

Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing

(2018) Abhishek Sharma et al.   SURFACE & COATINGS TECHNOLOGY

Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing

(2018) F. Khodabakhshi et al.   SURFACE & COATINGS TECHNOLOGY

Tribological Behavior of AA1050H24-Graphene Nanocomposite Obtained by Friction Stir Processing

(2018) Julio Blanco Fernandez et al.   Metals

Influence of process parameters and temperature on the solid state fabrication of multilayered graphene-aluminium surface nanocomposites

(2018) Baidehish Sahoo et al.   Journal of Manufacturing Processes

The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer

(2018) A. Abdollahzadeh et al.   Journal of Manufacturing Processes

Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer

(2018) Ali Shamsipur et al.   International Journal of Minerals Metallurgy and Materials

Tribological Behavior of Solid-State Processed Al-1100/GNP Surface Nanocomposites

(2018) Badehish Sahoo et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

AZ31B/7075-T6 alloys friction stir lap welding with a zinc interlayer

(2018) Shiyu Niu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Joining of metal matrix composites using friction stir welding: a review

(2018) V. K. Parikh et al.   MATERIALS AND MANUFACTURING PROCESSES

Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing

(2018) Abhishek Sharma et al.   Journal of Manufacturing Processes

Strategical parametric investigation on manufacturing of Al–Mg–Zn–Cu alloy surface composites using FSP

(2017) H. Rana et al.   MATERIALS AND MANUFACTURING PROCESSES

Process parameters/material location affecting hooking in friction stir lap welding: Dissimilar aluminum alloys

(2017) S. Rajesh et al.   MATERIALS AND MANUFACTURING PROCESSES

Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites

(2017) H. G. Prashantha Kumar et al.   MATERIALS AND MANUFACTURING PROCESSES

Friction stir processing of Al6061-SiC-graphite hybrid surface composites

(2017) Abhishek Sharma et al.   MATERIALS AND MANUFACTURING PROCESSES

Preparation of aluminium 6063-graphite surface composites by an electrical resistance heat assisted pressing technique

(2017) Baidehish Sahoo et al.   SURFACE & COATINGS TECHNOLOGY

Enhancement of mechanical properties of FSWed AA7075 lap joints through in-situ fabrication of MMC

(2017) Gianluca Buffa et al.   Journal of Manufacturing Processes

Surface modification of aluminium by graphene impregnation

(2017) Baidehish Sahoo et al.   MATERIALS & DESIGN

The effect of interface defect on mechanical properties and its formation mechanism in friction stir lap welded joints of aluminum alloys

(2016) Huijie Liu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy

(2016) Rita Maurya et al.   MATERIALS & DESIGN

Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes

(2015) Mohsen Bahrami et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolutions and mechanical properties of nano-SiC-fortified AA7075 friction stir weldment: The role of second pass processing

(2015) A. Hamdollahzadeh et al.   Journal of Manufacturing Processes

Studying microstructure and mechanical properties of SiC-incorporated AZ31 joints fabricated through FSW: the effects of rotational and traveling speeds

(2014) Amin Abdolahzadeh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Improved microstructure and mechanical properties in gas tungsten arc welded aluminum joints by using graphene nanosheets/aluminum composite filler wires

(2014) M. Fattahi et al.   MICRON

A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique

(2013) Mohsen Bahrami et al.   MATERIALS & DESIGN

Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength

(2013) Mohsen Bahrami et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication of exfoliated graphite nanoplatelets-reinforced aluminum composites and evaluating their mechanical properties and corrosion behavior

(2011) F.H. Latief et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Solid-State Joining of Metal Matrix Composites: A Survey of Challenges and Potential Solutions

(2011) Tracie Prater   MATERIALS AND MANUFACTURING PROCESSES

The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints

(2011) Y.F. Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An Investigation of Friction During Friction Stir Welding of Metallic Materials

(2009) K. Kumar et al.   MATERIALS AND MANUFACTURING PROCESSES