Particulate metal matrix composites and their fabrication via friction stir processing – a review
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Particulate metal matrix composites and their fabrication via friction stir processing – a review
Authors
Keywords
-
Journal
MATERIALS AND MANUFACTURING PROCESSES
Volume 34, Issue 8, Pages 833-881
Publisher
Informa UK Limited
Online
2019-04-29
DOI
10.1080/10426914.2019.1605181
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Study the formation of mechanically mixed layer and subsurface behavior of worn-out surfaces of aged hybrid metal matrix composites
- (2018) Viswanatha B.M. et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite
- (2018) H. C. Madhu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Formation of Al/(Al13Fe4 + Al2O3) Nano-composites via Mechanical Alloying and Friction Stir Processing
- (2018) Ghasem Azimi-Roeen et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Plasticine modeling of material mixing in friction stir welding
- (2018) Vinayak Malik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Friction stir processing strategies to develop a surface composite layer on AA6061-T6
- (2018) Carmen María Abreu Fernández et al. MATERIALS AND MANUFACTURING PROCESSES
- Pressure infiltration processes to synthesize metal matrix composites – A review of metal matrix composites, the technology and process simulation
- (2018) R. Etemadi et al. MATERIALS AND MANUFACTURING PROCESSES
- Comprehensive studies on processing and characterization of hybrid magnesium composites
- (2018) E. Suneesh et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of friction stir processing and hybrid reinforcements on copper
- (2018) Titus Thankachan et al. MATERIALS AND MANUFACTURING PROCESSES
- Carbon plasma immersion ion implantation and DLC deposition on Ni−Ti alloy
- (2018) S. Viswanathan et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication of stainless steel 316L/TiB 2 composite coating via friction surfacing
- (2018) D. Guo et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure, Mechanical and Sliding Wear Behavior of AA5083–B4C/SiC/TiC Surface Composites Fabricated Using Friction Stir Processing
- (2018) Vikram Kumar S. Jain et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Mechanical Properties and Wear Behavior of Zn and MoS2 Reinforced Surface Composite Al- Si Alloys Using Friction Stir Processing
- (2018) N. Saini et al. Silicon
- A356/TiO2 Nanocomposite Fabricated by Friction Stir Processing: Microstructure, Mechanical Properties and Tribologic Behavior
- (2018) S. Ahmadifard et al. JOM
- Effect of tool shoulder geometry on fabrication of Al/Al2O3 surface nano composite by friction stir processing
- (2018) Naresh Parumandla et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Properties–microstructure relationship in Al–Fe in situ composite produced by friction stir processing
- (2018) Alireza Najafi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Sliding wear behaviour of Al-Si alloy–fly ash composites produced by powder metallurgy technique
- (2017) H. Siddhi Jailani et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- An investigation on wear behavior of Cu-graphite nanocomposites prepared by flake powder metallurgy
- (2017) Temel Varol et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Fabrication of Al/Babbitt surface bearing through friction stir processing
- (2017) Seyed Mohammad Arab et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Experimental investigations on the enhancement of mechanical properties of magnesium-based hybrid metal matrix composites through friction stir processing
- (2017) S. Arokiasamy et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing
- (2017) M. Sarkari Khorrami et al. International Journal of Minerals Metallurgy and Materials
- Synthesis, mechanical and corrosion behaviour of iron–silicon carbide metal matrix nanocomposites
- (2017) Piyush Khosla et al. JOURNAL OF COMPOSITE MATERIALS
- Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles
- (2017) Mostafa Akbari et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Fabrication of AZ31/MWCNTs Surface Metal Matrix Composites by Friction Stir Processing: Investigation of Microstructure and Mechanical Properties
- (2017) Seyed Mohammad Arab et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure, Strength, and Wear Behavior Relationship in Al-Fe3O4 Nanocomposite Produced by Multi-pass Friction Stir Processing
- (2017) Meisam Eftekhari et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface modification and characterization of zirconium carbide particulate reinforced C70600 CuNi composite fabricated via friction stir processing
- (2017) Suganya Priyadharshini G. et al. Journal of Mechanical Science and Technology
- TiH2-based Ti-1Al-8V-5Fe PM alloys with different addition methods of alloying elements
- (2017) Yanan Zhang et al. MATERIALS AND MANUFACTURING PROCESSES
- Microwave processing of titanium and titanium alloys for structural, biomedical and shape memory applications: Current status and challenges
- (2017) S. D. Luo et al. MATERIALS AND MANUFACTURING PROCESSES
- Distribution of reinforcement particles in surface composite fabrication via friction stir processing: Suitable strategy
- (2017) Sandeep Rathee et al. MATERIALS AND MANUFACTURING PROCESSES
- Issues and strategies in composite fabrication via friction stir processing: A review
- (2017) Sandeep Rathee et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigations on the effect of friction stir processing on Cu-BN surface composites
- (2017) Titus Thankachan et al. MATERIALS AND MANUFACTURING PROCESSES
- Multipass FSP on AA6063-T6 Al: Strategy to fabricate surface composites
- (2017) Namrata Gangil et al. MATERIALS AND MANUFACTURING PROCESSES
- Processing issues, machining, and applications of aluminum metal matrix composites
- (2017) Jigar Suthar et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of initial composition on phase selection in Ni–Si powder blends processed by mechanical alloying
- (2017) C. Suryanarayana et al. MATERIALS AND MANUFACTURING PROCESSES
- Encapsulation and microwave hybrid processing of Al 6061–Graphene–SiC composites
- (2017) H. G. Prashantha Kumar et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication of Al–Si coating on Ti–6Al–4V substrate by mechanical alloying
- (2017) Cheng Chen et al. MATERIALS AND MANUFACTURING PROCESSES
- Microstructural features of dynamic recrystallization in alloy 625 friction surfacing coatings
- (2017) Stefanie Hanke et al. MATERIALS AND MANUFACTURING PROCESSES
- Processing of Ni-WC-8Co MMC casting through microwave melting
- (2017) Satnam Singh et al. MATERIALS AND MANUFACTURING PROCESSES
- Machinability enhancement of stir cast Al-TiCp composites under cryogenic condition
- (2017) Sravan Kumar Josyula et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication of low-cost Ti-1Al-8V-5Fe by powder metallurgy with TiH2 and FeV80 alloy
- (2017) Yanan Zhang et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of friction stir processing parameters on surface modified 90Cu-10Ni composites
- (2017) G. Suganya Priyadharshini et al. MATERIALS AND MANUFACTURING PROCESSES
- Feasibility of underwater laser forming of laminated metal composites
- (2017) S. M. H. Seyedkashi et al. MATERIALS AND MANUFACTURING PROCESSES
- Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments
- (2017) C. Kannan et al. MATERIALS AND MANUFACTURING PROCESSES
- Al–5.5Mg–1.5Li–0.5Zn–0.07Sc–0.07Zr alloy produced by gravity casting and heat treatment processing
- (2017) Chunchang Shi et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication and machining of ceramic composites — A review on current scenario
- (2017) Mandeep Singh Rayat et al. MATERIALS AND MANUFACTURING PROCESSES
- Aluminide formation on Alloy 800 by plasma spraying and heat treatment
- (2017) R. S. Dutta et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction stir processing of Al6061-SiC-graphite hybrid surface composites
- (2017) Abhishek Sharma et al. MATERIALS AND MANUFACTURING PROCESSES
- Development of cBN reinforced Ti6Al4V MMCs through laser sintering and process optimization
- (2017) M. Hussain et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of infiltration parameters on the synthesis of nano-laminated Ti3SiC2
- (2017) H. Foratirad et al. MATERIALS AND MANUFACTURING PROCESSES
- WEDM process parameter optimization of FSPed copper-BN composites
- (2017) Titus Thankachan et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of reinforcement and processing on steel-based composites: Microstructure and mechanical response
- (2017) Silani Sahoo et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface alloying of miniature components by micro-electrical discharge process
- (2017) Ved Prakash et al. MATERIALS AND MANUFACTURING PROCESSES
- Pulse and direct electrodeposition of Ni–Co/micro and nanosized SiO2 particles
- (2017) Siavash Imanian Ghazanlou et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication of TiC/TiB/Ti3AlC2 phases reinforced coatings on Ti-6Al-4V substrate
- (2017) H. X. Zhang et al. MATERIALS AND MANUFACTURING PROCESSES
- Barium titanate reinforced nickel aluminium bronze surface composite by friction stir processing
- (2017) Shivraman Thapliyal et al. MATERIALS SCIENCE AND TECHNOLOGY
- Critical assessment: friction stir processing, potential, and problems
- (2017) Adrian P. Gerlich MATERIALS SCIENCE AND TECHNOLOGY
- Reactive friction-stir processing of nanocomposites: effects of thermal history on microstructure–mechanical property relationships
- (2017) F. Khodabakhshi et al. MATERIALS SCIENCE AND TECHNOLOGY
- Ductilizing of cast hypereutectic Al–17%Si alloy by friction stir processing
- (2017) Nitin Saini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type
- (2017) Mostafa Akbari et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Elucidation of the role of rotation speed and stirring direction on AA 7075-B4C surface composites formulated by friction stir processing
- (2017) Harikrishna Rana et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Wear and mechanical properties of surface hybrid metal matrix composites on Al–Si aluminum alloys fabricated by friction stir processing
- (2017) Mostafa Akbari et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Improving tribological behavior of friction stir processed A413/SiC p surface composite using MoS 2 lubricant particles
- (2017) M. JANBOZORGI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Investigating Effects of Groove Dimensions on Microstructure and Mechanical Properties of AA6063/SiC Surface Composites Produced by Friction Stir Processing
- (2017) Sandeep Rathee et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- The effects of processing environments on the microstructure and mechanical properties of the Ti/5083Al composites produced by friction stir processing
- (2017) Guoqiang Huang et al. Journal of Manufacturing Processes
- Study on the corrosion of copper alloy by friction stir surface processing
- (2016) Song Weiwei et al. ANTI-CORROSION METHODS AND MATERIALS
- Experimental investigation of Mg/SiC composite fabrication via friction stir processing
- (2016) Ahmed Z. Naser et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP
- (2016) Mohammad Hasan Shojaeefard et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Magnetic Properties of Friction Stir Processed Composite
- (2016) Shamiparna Das et al. JOM
- Investigation on laser drilling of AA6061-TiB2/ZrB2 in situ composites
- (2016) A. Mahamani et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V
- (2016) V. Fitseva et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of ceramic reinforcements on microwave sintered metal matrix composites
- (2016) P. Ashwath et al. MATERIALS AND MANUFACTURING PROCESSES
- B4C/Al Composites Processed by Metal-assisted Pressureless Infiltration Technique and its Characterization
- (2016) Y. T. Yao et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of Manufacturing Processes on Microstructure and Properties of Al/A356–B4C Composites
- (2016) Qiyao Hu et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction-stir processing of an AA8026-TiB 2 -Al 2 O 3 hybrid nanocomposite: Microstructural developments and mechanical properties
- (2016) H. Eskandari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Trade-off among mechanical properties and energy consumption in multi-pass friction stir processing of Al7075 alloy employing neural network–based genetic optimization
- (2016) G Hussain et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Fabrications of Surface Nanocomposite by Friction Stir Processing to Improve Mechanical and Microstructural Properties of Low Carbon Steel
- (2016) A. R. Khademi et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing
- (2016) N. Yuvaraj et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Wear characteristics of copper-based surface-level microcomposites and nanocomposites prepared by friction stir processing
- (2016) S. Cartigueyen et al. Friction
- An Experimental Investigation for Multi-Response Optimization of Friction Stir Process Parameters During Fabrication of AA6061/B4Cp Composites
- (2015) M. Puviyarasan et al. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
- Effect of the graphite content on the tribological properties of hybrid Al/SiC/Gr composites processed by powder metallurgy
- (2015) Adalet Zeren INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Determination of optimum particle size of Al2O3/SiCp reinforced hybrid composites materials in wear testing
- (2015) Necat Altinkök et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- An experimental study on multi-pass friction stir processing of Al/TiN composite: some microstructural, mechanical, and wear characteristics
- (2015) G. Hussain et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wear properties of Al–Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process
- (2015) Reza Vatankhah Barenji et al. JOURNAL OF COMPOSITE MATERIALS
- Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: A comparative study focusing on particle capture in matrix
- (2015) M Karbalaei Akbari et al. JOURNAL OF COMPOSITE MATERIALS
- Friction Stir Processing of Al-TiB2 In Situ Composite: Effect on Particle Distribution, Microstructure and Properties
- (2015) Devinder Yadav et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Friction stir processing of an aluminum-magnesium alloy with pre-placing elemental titanium powder: In-situ formation of an Al3Ti-reinforced nanocomposite and materials characterization
- (2015) F. Khodabakhshi et al. MATERIALS CHARACTERIZATION
- Strengthening analyses and mechanical assessment of Ti/Al2O3 nano-composites produced by friction stir processing
- (2015) Aziz Shafiei-Zarghani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of metal-matrix AL7075T651/TiN nano composite employing friction stir process
- (2015) Khalid A Al-Ghamdi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Tool–workpiece contact detection in micro-milling using wireless-aided accelerometer sensor
- (2015) Sritama Roy et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of sliding distance on dry sliding tribological behaviour of Aluminium Hybrid Metal Matrix Composite (AlHMMC): An alternate for automobile brake rotor – A Grey Relational approach
- (2015) M Kumar et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Microstructure and Mechanical Properties of AZ31/SiC and AZ31/CNT Composites Produced by Friction Stir Processing
- (2015) A. Alavi Nia et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Optimization of Mechanical and Wear Properties of Functionally Graded Al6061/SiC Nanocomposites Produced by Friction Stir Processing (FSP)
- (2015) M. Saadatmand et al. Acta Metallurgica Sinica-English Letters
- Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing
- (2015) M. Golmohammadi et al. MATERIALS & DESIGN
- Corrosion behavior of in situ (TiC-TiB2)p/AZ91 magnesium matrix composites in Harrison solution
- (2014) Mohamed Gobara et al. ANTI-CORROSION METHODS AND MATERIALS
- Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with \rm Al}_{2}{\rm O}_{3}/0.5\,{\rm Gr Al 2 O 3 / 0.5 Gr Hybrid Surface Nanocomposite
- (2014) T. Prakash et al. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
- Fabrication and Characterization of CU/B4C Surface Dispersion Strengthened Composite using Friction Stir Processing
- (2014) R. Sathiskumar et al. ARCHIVES OF METALLURGY AND MATERIALS
- Optimization of process parameters for friction stir processing (FSP) of Al–TiC in situ composite
- (2014) Ranjit Bauri BULLETIN OF MATERIALS SCIENCE
- Rheocasting of semi-solid Al359/20%SiC metal matrix composite using SEED process
- (2014) E. A. Elsharkawi et al. CANADIAN METALLURGICAL QUARTERLY
- Mechanical and microstructural characterization of Cu/CNT nanocomposite layers fabricated via friction stir processing
- (2014) Jalal Jafari et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural, mechanical, and thermophysical characterization of Cu/WC composite layers fabricated via friction stir processing
- (2014) Jahangir Khosravi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In situ formation of Al–Al3Ni composites on commercially pure aluminium by friction stir processing
- (2014) A. Shahi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Composite fabrication in cast Al A206 via friction stir processing
- (2014) N. Sun et al. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Fabrication and characterization of functionally graded Al–SiC nanocomposite by using a novel multistep friction stir processing
- (2014) Mojtaba Salehi et al. MATERIALS & DESIGN
- Surface Modification and Nanocomposite Layering of Fastener-Hole through Friction-Stir Processing
- (2014) Nitin J. Panaskar et al. MATERIALS AND MANUFACTURING PROCESSES
- Consolidated Al/Al2O3Nanocomposites by Equal Channel Angular Pressing and Hot Extrusion
- (2014) Riccardo Casati et al. MATERIALS AND MANUFACTURING PROCESSES
- Preparation and Evaluation of Mechanical Properties of 6061Al–B4CpComposites Produced via Two-Stage Melt Stirring
- (2014) V. Auradi et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication and Evaluation of Ti3Alp/Ti–6Al–4V Surface Layer via Additive Friction-Stir Processing
- (2014) Bo Li et al. MATERIALS AND MANUFACTURING PROCESSES
- The Effect of Variable Binder Content and Sintering Temperature on the Mechanical Properties of WC–Co–VC/Cr3C2Nanocomposites
- (2014) N. Al-Aqeeli et al. MATERIALS AND MANUFACTURING PROCESSES
- Study of a New Method to Fabricate W–Cu Composites
- (2014) Pei Zhao et al. MATERIALS AND MANUFACTURING PROCESSES
- Effects of Tilt Angle on the Properties of Dissimilar Friction Stir Welding Copper to Aluminum
- (2014) Kush P. Mehta et al. MATERIALS AND MANUFACTURING PROCESSES
- Manufacturing Wear-Resistant 10Ce-TZP/Al2O3Nanoparticle Aluminum Composite by Powder Metallurgy Processing
- (2014) Niloofar Soltani et al. MATERIALS AND MANUFACTURING PROCESSES
- Mechanical Behavior Enhancement of AM60/Al2O3pMagnesium Metal–Matrix Nanocomposites by ECAE
- (2014) Song-Jeng Huang et al. MATERIALS AND MANUFACTURING PROCESSES
- The Hot Workability of SiCp/2024 Al Composite by Stir Casting
- (2014) S. Y. Wang et al. MATERIALS AND MANUFACTURING PROCESSES
- Reactive friction stir processing of AA 5052–TiO2nanocomposite: process–microstructure–mechanical characteristics
- (2014) F. Khodabakhshi et al. MATERIALS SCIENCE AND TECHNOLOGY
- Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing
- (2014) Q. Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Improvement of Mechanical Properties in the Functionally Graded Aluminum Matrix Nanocomposites Fabricated via a Novel Multistep Friction Stir Processing
- (2014) Mojtaba Salehi et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles
- (2014) Satnam Singh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Modeling Tensile Strength of Al–SiC Functionally Graded Composite Produced Using Friction Stir Processing (FSP)
- (2014) M. Saadatmand et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Metal Matrix Composites Reinforced by Nano-Particles—A Review
- (2014) Riccardo Casati et al. Metals
- Nano-hydroxyapatite reinforced AZ31 magnesium alloy by friction stir processing: a solid state processing for biodegradable metal matrix composites
- (2013) B. Ratna Sunil et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Wear characterization of functionally graded Al–SiC composite coatings produced by Friction Surfacing
- (2013) J. Gandra et al. MATERIALS & DESIGN
- Analysis of Material Characteristics and Forging Parameters for Flashless Forged Aluminum-Matrix Composites
- (2013) Malte Stonis et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction-Stir Nitriding of Titanium Alloy Surface Layer
- (2013) Bo Li et al. MATERIALS AND MANUFACTURING PROCESSES
- Fabrication of TiCp/Ti–6Al–4V surface composite via friction stir processing (FSP): Process optimization, particle dispersion-refinement behavior and hardening mechanism
- (2013) Bo Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing
- (2013) Y. Mazaheri et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Role of friction stir processing parameters on microstructure and microhardness of boron carbide particulate reinforced copper surface composites
- (2013) R SATHISKUMAR et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
- Wear Behavior of Multiwalled Carbon Nanotube/AZ31 Composite Obtained by Friction Stir Processing
- (2013) Mahdiyeh Jamshidijam et al. TRIBOLOGY TRANSACTIONS
- Effect of Traverse Speed on Microstructure and Microhardness of Cu/B4C Surface Composite Produced by Friction Stir Processing
- (2013) R. Sathiskumar et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Review of tools for friction stir welding and processing
- (2012) Y N Zhang et al. CANADIAN METALLURGICAL QUARTERLY
- Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites
- (2012) Hossein Izadi et al. CARBON
- A critical review of recent research on functionally graded plates
- (2012) D.K. Jha et al. COMPOSITE STRUCTURES
- Dry sliding wear behaviour of aluminium/alumina/graphite hybrid metal matrix composites
- (2012) N. Radhika et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effect of processing parameters on fabrication of Al–Mg/Cu composites via friction stir processing
- (2012) Mehdi Zohoor et al. MATERIALS & DESIGN
- Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
- (2012) Qiang Liu et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing
- (2012) Ahmad Ghasemi-Kahrizsangi et al. SURFACE & COATINGS TECHNOLOGY
- Friction and wear behaviors of Al‐SiC‐B4C composites produced by pressure infiltration method
- (2011) U. Soy et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Composite fabrication using friction stir processing—a review
- (2011) H. S. Arora et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of SiC Particle Size and Process Parameters on the Microstructure and Hardness of AZ91/SiC Composite Layer Fabricated by FSP
- (2011) P. Asadi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Functionally graded materials produced by friction stir processing
- (2011) J. Gandra et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route
- (2011) M. Sharifitabar et al. MATERIALS & DESIGN
- Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing
- (2011) A. Dolatkhah et al. MATERIALS & DESIGN
- Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect
- (2011) A. Sanaty-Zadeh MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes
- (2011) P. Asadi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructures and mechanical properties of Al2O3/AZ91 surface nanocomposite layer produced by friction stir processing
- (2011) G Faraji et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Numerical optimisation of friction stir welding: review of future challenges
- (2011) C C Tutum et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Review: friction stir welding tools
- (2011) R Rai et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer
- (2011) Ali Shamsipur et al. SURFACE & COATINGS TECHNOLOGY
- Friction and wear studies of die cast aluminum alloy‐aluminum oxide‐reinforced composites
- (2010) M. Kathiresan et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Producing of AZ91/SiC composite by friction stir processing (FSP)
- (2010) Parviz Asadi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Carbon nanotube reinforced metal matrix composites - a review
- (2010) S R Bakshi et al. INTERNATIONAL MATERIALS REVIEWS
- Fabrication of AA6061/Al2O3 nano ceramic particle reinforced composite coating by using friction stir processing
- (2010) Min Yang et al. JOURNAL OF MATERIALS SCIENCE
- Friction stir processing of thixoformed AZ91D magnesium alloy and fabrication of surface composite reinforced by SiCps
- (2010) Tijun Chen et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
- (2010) Mohsen Barmouz et al. MATERIALS CHARACTERIZATION
- Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles’ size and volume fraction
- (2010) M. Barmouz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Blending of iron and silicon carbide powders for producing metal matrix composites by laser sintering process
- (2010) Cheekur Krishnamurthy Srinivasa et al. RAPID PROTOTYPING JOURNAL
- Nickel particle embedded aluminium matrix composite with high ductility
- (2009) Devinder Yadav et al. MATERIALS LETTERS
- Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface
- (2009) E. R. I. Mahmoud et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and wear assessment of TIG surface alloying of CP-titanium with silicon
- (2008) F. Adib Hajbagheri et al. JOURNAL OF MATERIALS SCIENCE
- Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy
- (2008) Z.Y. Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
- (2008) D.K. Lim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Friction Stir Processing Technology: A Review
- (2008) Z.Y. Ma METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Tribological behaviour of A390/Grp metal—matrix composites fabricated using a combination of rheocasting and squeeze casting techniques
- (2008) T S Mahmoud PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing
- (2008) E. R. I. Mahmoud et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites
- (2007) Z. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search