Performance Assessment of a Three-Dimensional Printed Porous Media Produced by Selective Laser Melting Technology for the Optimization of Loop Heat Pipe Wicks

Selective Laser Sintering Fabricated Thermoplastic Polyurethane/Graphene Cellular Structures with Tailorable Properties and High Strain Sensitivity

(2019) Alfredo Ronca et al.   Applied Sciences-Basel

Production and Processing of a Spherical Polybutylene Terephthalate Powder for Laser Sintering

(2019) Rob Kleijnen et al.   Applied Sciences-Basel

Fabrication of Mesh Patterns Using a Selective Laser-Melting Process

(2019) Tae Woo Hwang et al.   Applied Sciences-Basel

Measurement and simulation of pressure drop across replicated porous aluminium in the Darcy-Forchheimer regime

(2018) A.J. Otaru et al.   ACTA MATERIALIA

Capillary pumping performance of porous copper fiber sintered wicks for loop heat pipes

(2018) Weisong Ling et al.   APPLIED THERMAL ENGINEERING

Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes

(2018) Heng Tang et al.   APPLIED THERMAL ENGINEERING

Thermal-fluidic transport characteristics of bi-porous wicks for potential loop heat pipe systems

(2018) Prem Kumar et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting

(2018) Y.J. Liu et al.   SCRIPTA MATERIALIA

Determination of Permeability and Inertial Coefficients of Sintered Metal Porous Media Using an Isothermal Chamber

(2018) Wei Zhong et al.   Applied Sciences-Basel

Online Monitoring Based on Temperature Field Features and Prediction Model for Selective Laser Sintering Process

(2018) Zhehan Chen et al.   Applied Sciences-Basel

An experimental investigation and optimization of screen mesh heat pipes for low-mid temperature applications

(2017) Davoud Jafari et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Integrated flat heat pipe with a porous network wick for high-heat-flux electronic devices

(2017) Xianbing Ji et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays

(2017) Kathryn L. Kirsch et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Switchable heat transfer mechanisms of nucleation and convection by wettability match of evaporator and condenser for heat pipes: Nano-structured surface effect

(2017) Xianbing Ji et al.   Nano Energy

Simulation of Hybrid Photovoltaic Solar Assisted Loop Heat Pipe/Heat Pump System

(2017) Nannan Dai et al.   Applied Sciences-Basel

Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting

(2016) Y.J. Liu et al.   ACTA MATERIALIA

Optimizing the design for a two-phase cooling loop heat pipe

(2016) J. Esarte et al.   APPLIED THERMAL ENGINEERING

Two-phase flow pattern based theoretical study of loop heat pipes

(2016) Chih-Yuan Weng et al.   APPLIED THERMAL ENGINEERING

A review of small heat pipes for electronics

(2016) Xianping Chen et al.   APPLIED THERMAL ENGINEERING

Vapor pocket behavior inside the porous wick of a capillary pumped loop for terrestrial application

(2015) Riadh Boubaker et al.   APPLIED THERMAL ENGINEERING

Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring

(2015) Luis Vazquez et al.   ENERGY

Experimental investigation on the sintered wick of the anti-gravity loop-shaped heat pipe

(2015) Hui Li et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Metal foam hydrodynamics: Flow regimes from pre-Darcy to turbulent

(2014) Nihad Dukhan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Specific surface and porosity relationship for sandstones for prediction of permeability

(2014) Arash Rabbani et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Influence of packing density on performance of porous wick for LHP

(2014) Dezhi Wang et al.   POWDER TECHNOLOGY

Permeability Description by Characteristic Length, Tortuosity, Constriction and Porosity

(2014) Carl Fredrik Berg   TRANSPORT IN POROUS MEDIA

Developing a new form of the Kozeny–Carman parameter for structured porous media through lattice-Boltzmann modeling

(2013) A. Ebrahimi Khabbazi et al.   COMPUTERS & FLUIDS

Experimental investigation on isothermal performance of the micro-grooved heat pipe

(2013) Yong Tang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Transient analysis of heat transfer and fluid flow in a polymer-based Micro Flat Heat Pipe with hybrid wicks

(2013) Mehdi Famouri et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Capillary performance of bi-porous sintered metal wicks

(2012) Chan Byon et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Characterization of capillary performance of composite wicks for two-phase heat transfer devices

(2012) Daxiang Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Re-examining Archie's law: Conductance description by tortuosity and constriction

(2012) Carl Fredrik Berg   PHYSICAL REVIEW E

Can filter cake porosity be estimated based on the Kozeny–Carman equation?

(2012) Chi Tien et al.   POWDER TECHNOLOGY

Dependency of Tortuosity and Permeability of Porous Media on Directional Distribution of Pore Voids

(2012) Peijun Guo   TRANSPORT IN POROUS MEDIA

Experimental optimization of capillary structures for loop heat pipes and heat switches

(2010) Valery M. Kiseev et al.   APPLIED THERMAL ENGINEERING

Experimental study on capillary pumping performance of porous wicks for loop heat pipe

(2010) Jinwang Li et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Validity of the permeability Carman–Kozeny equation: A volume averaging approach

(2008) Francisco J. Valdes-Parada et al.   PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS