Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
Authors
Keywords
-
Journal
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
Volume -, Issue -, Pages 1-49
Publisher
Informa UK Limited
Online
2019-07-08
DOI
10.1080/10408436.2018.1490251
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Friction stir processing – State of the art
- (2018) Marek Stanisław Węglowski Archives of Civil and Mechanical Engineering
- Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
- (2018) G.K. Padhy et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Laser cladding assisted by friction stir processing for preparation of deformed crack-free Ni-Cr-Fe coating with nanostructure
- (2018) Siyao Xie et al. OPTICS AND LASER TECHNOLOGY
- Severe friction stir processing of an Al-Zn-Mg-Cu alloy: Misorientation and its influence on superplasticity
- (2018) Alberto Orozco-Caballero et al. MATERIALS & DESIGN
- Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir processing
- (2017) J.S. Jesus et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructural evolution and mechanical properties of Mg Zn Y Zr alloy during friction stir processing
- (2017) Yaobin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Passive and electrochemical response of friction stir processed pure Titanium
- (2017) Arash Fattah-alhosseini et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Aluminium based in-situ composite fabrication through friction stir processing: A review
- (2017) Namrata Gangil et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Processing–Microstructure–Crystallographic Texture–Surface Property Relationships in Friction Stir Processing of Titanium
- (2017) Sumit Bahl et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of polygonal pin profiles on friction stir processed superplasticity of AA7075 alloy
- (2017) Vivek V. Patel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of friction stir processing on tensile and fracture behaviour of AZ91 alloy
- (2017) A. Raja et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu Zn alloy coating with friction stir processing
- (2017) Chunjie Huang et al. MATERIALS CHARACTERIZATION
- Structural refinement in austenitic stainless steel by submerged friction stir processing
- (2017) K. Selvam et al. MATERIALS CHEMISTRY AND PHYSICS
- Enhanced strength and ductility of high pressure die casting AZ91D Mg alloy by using cold source assistant friction stir processing
- (2017) Nan Xu et al. MATERIALS LETTERS
- Microstructures and mechanical properties of Al-Li 2198-T8 alloys processed by two different severe plastic deformation methods: A comparative study
- (2017) Zhixiong Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, crystallographic texture and mechanical behaviour of friction stir processed Mg-Zn-Ca-Zr alloy ZKX50
- (2017) M. Vargas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement and nanostructure formation in pure copper during cryogenic friction stir processing
- (2017) Yunpeng Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strengthening mechanism of friction stir processed and post heat treated NiAl bronze alloy: Effect of rotation rates
- (2017) Yuting Lv et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
- (2017) O.G. Rivera et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure, texture, and room temperature mechanical properties of friction stir processed Mg-Y-Nd alloy
- (2017) A.M. Jamili et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy
- (2017) Yu Chen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Fundamentals and advances in magnesium alloy corrosion
- (2017) M. Esmaily et al. PROGRESS IN MATERIALS SCIENCE
- Effect of friction stir processing on the corrosion behavior of pure Mg
- (2017) D. Ahmadkhaniha et al. Protection of Metals and Physical Chemistry of Surfaces
- Enhancing the erosion-corrosion resistance of steel through friction stir processing
- (2017) K. Selvam et al. WEAR
- High strain deformation of austenitic steel for enhancing erosion resistance
- (2017) Karthikeyan Selvam et al. WEAR
- Evaluation of the mechanical anisotropy and the deformation mechanism in a multi-pass friction stir processed Al-Zn-Mg-Cu alloy
- (2017) Alberto Orozco-Caballero et al. MATERIALS & DESIGN
- Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing
- (2017) Tom Peat et al. MATERIALS & DESIGN
- Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy
- (2017) S. S. Nene et al. Scientific Reports
- Cold spraying – A materials perspective
- (2016) H. Assadi et al. ACTA MATERIALIA
- Study on the corrosion of copper alloy by friction stir surface processing
- (2016) Song Weiwei et al. ANTI-CORROSION METHODS AND MATERIALS
- On the passive and electrochemical behavior of severely deformed pure Ti through friction stir processing
- (2016) Arash Fattah-alhosseini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of multi-pass friction stir processing on wear behaviour and machinability of an Al-Si hypoeutectic A356 alloy
- (2016) Sandeep Kumar Singh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties of friction stir processed Cu with an ideal ultrafine-grained structure
- (2016) P. Xue et al. MATERIALS CHARACTERIZATION
- Particle refinement and fine-grain formation leading to enhanced mechanical behaviour in a hypo-eutectic Al–Si alloy subjected to multi-pass friction stir processing
- (2016) Sumit Meenia et al. MATERIALS CHARACTERIZATION
- Characterization of the microstructure, texture and mechanical properties of 7075 aluminum alloy in early stage of severe plastic deformation
- (2016) M. Moghaddam et al. MATERIALS CHARACTERIZATION
- Achieving ultrafine-grained ferrite structure in friction stir processed weld metal
- (2016) P. Xue et al. MATERIALS LETTERS
- Enhanced mechanical properties of pure copper with a mixture microstructure of nanocrystalline and ultrafine grains
- (2016) Yunpeng Wang et al. MATERIALS LETTERS
- Enhanced mechanical properties of medium carbon steel casting via friction stir processing and subsequent annealing
- (2016) P. Xue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Impact toughness of friction stir processed low carbon steel used in shipbuilding
- (2016) D.M. Sekban et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy
- (2016) Yu Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joint using two-pass friction stir processing with rapid cooling
- (2016) Nan Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys
- (2016) M.A. García-Bernal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Multi-pass Friction Stir Processing on the Electrochemical and Corrosion Behavior of Pure Titanium in Strongly Acidic Solutions
- (2016) Arash Fattah-Alhosseini et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Modification of Laser-Deposited High-Entropy CrFeCoNiMoWC Alloy by Friction Stir Processing: Nanograin Formation and Deformation Mechanism
- (2016) Ruidi Li et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Friction Stir Welding in Wrought and Cast Aluminum Alloys: Heat Transfer Modeling and Thermal History Analysis
- (2016) Yi Pan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Surface modification of cast inconel 740 superalloy by heat-assisted friction stir processing
- (2016) Jae-Yeon Kim et al. METALS AND MATERIALS INTERNATIONAL
- An analytical model to calculate the peak temperature for friction stir welding
- (2016) Jinwen Qian et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Modification of a cold sprayed SiC p /Al5056 composite coating by friction stir processing
- (2016) Chunjie Huang et al. SURFACE & COATINGS TECHNOLOGY
- Study of the effect of friction stir processing of the sliding wear behavior of cast NiAl bronze: A statistical analysis
- (2016) Shivraman Thapliyal et al. TRIBOLOGY INTERNATIONAL
- Friction stir processing of A-286 stainless steel: Microstructural evolution during wear
- (2016) O.O. Tinubu et al. WEAR
- Enhancing the machinability of hypereutectic Al-30Si alloy by friction stir processing
- (2016) A.G. Rao et al. Journal of Manufacturing Processes
- Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg 4Y 3Nd alloy
- (2016) N. Kumar et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical properties of the stir zone in friction stir processed AISI201 stainless steel
- (2016) H.B. Cui et al. MATERIALS & DESIGN
- Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy
- (2015) Naresh Nadammal et al. JOM
- Microstructure evolution and mechanical properties of Mg–Nd–Y alloy in different friction stir processing conditions
- (2015) Genghua Cao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, Mechanical and Corrosion Properties of Friction Stir-Processed AISI D2 Tool Steel
- (2015) Noushin Yasavol et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The Grain Structure and Phase Transformations of TWIP Steel During Friction Stir Processing
- (2015) M. H. Razmpoosh et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Local improvement of structural steels high-friction properties by friction stir texturing
- (2015) M.I. Costa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Relating grain size to the Zener–Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processing
- (2015) A.H. Ammouri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface composites by friction stir processing: A review
- (2015) Vipin Sharma et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure feature of friction stir processed ductile cast iron
- (2015) Xin Yao et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel
- (2015) M. Hajian et al. MATERIALS & DESIGN
- Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites
- (2015) Rui Yang et al. MATERIALS CHARACTERIZATION
- Ductilizing of a brittle as-cast hypereutectic Al–Si alloy by friction stir processing
- (2015) A.G. Rao et al. MATERIALS LETTERS
- Superplastic behavior and microstructure evolution of a fine-grained Mg–Y–Nd alloy processed by submerged friction stir processing
- (2015) Genghua Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of two-pass friction stir processing on the microstructure and mechanical properties of as-cast binary Al–12Si alloy
- (2015) S.M. Aktarer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on distribution of long-period stacking ordered phase in Mg–Gd–Y–Zn–Zr alloy using friction stir processing
- (2015) Q. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical properties of ultra-fine grained AZ91 magnesium alloy processed by friction stir processing
- (2015) J.A. del Valle et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening
- (2015) Liqiang Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of friction stir processing on the microstructure and hardness of an aluminum-zinc-magnesium-copper alloy with nickel additives
- (2015) Haider T. Naeem et al. PHYSICS OF METALS AND METALLOGRAPHY
- Cold spraying: From process fundamentals towards advanced applications
- (2015) S. Grigoriev et al. SURFACE & COATINGS TECHNOLOGY
- Preparation of ultra-fine grain Ni–Al–WC coating with interlocking bonding on austenitic stainless steel by laser clad and friction stir processing
- (2015) Yong-jun XIONG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Rapid surface hardening and enhanced tribological performance of 4140 steel by friction stir processing
- (2015) Cinta Lorenzo-Martin et al. WEAR
- Enhancing strength, ductility and machinability of a Al–Si cast alloy by friction stir processing
- (2015) P.R. Guru et al. Journal of Manufacturing Processes
- Influence of rotational speed on the formation of friction stir processed zone in pure copper at low-heat input conditions
- (2015) S. Cartigueyen et al. Journal of Manufacturing Processes
- Friction stir processing of a D2 tool steel layer fabricated by laser cladding
- (2015) Toru Nagaoka et al. MATERIALS & DESIGN
- Effects of friction stir processing on wear properties of WC–12%Co sprayed on 52100 steel
- (2015) A. Rahbar-kelishami et al. MATERIALS & DESIGN
- Improvement of wear resistance of sprayed layer on 52100 steel by friction stir processing
- (2014) A. Rahbar-kelishami et al. APPLIED SURFACE SCIENCE
- Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing
- (2014) M. Hajian et al. APPLIED SURFACE SCIENCE
- A model to describe the surface gradient-nanograin formation and property of friction stir processed laser Co–Cr–Ni–Mo alloy
- (2014) Ruidi Li et al. APPLIED SURFACE SCIENCE
- Surface enhancement of cold work tool steels by friction stir processing with a pinless tool
- (2014) M.I. Costa et al. APPLIED SURFACE SCIENCE
- Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al–30Si alloy
- (2014) A.G. Rao et al. CORROSION SCIENCE
- Improvement of Structural and Mechanical Properties of Al-1100 Alloy via Friction Stir Processing
- (2014) M. Mosallaee et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of tool geometry on friction stir processing and fatigue strength of MIG T welds on Al alloys
- (2014) J.S. de Jesus et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy
- (2014) A. Alavi Nia et al. MATERIALS & DESIGN
- Effect of friction stir processing on erosion–corrosion behavior of nickel–aluminum bronze
- (2014) M. Lotfollahi et al. MATERIALS & DESIGN
- Increase of bending fatigue resistance for tungsten inert gas welded SS400 steel plates using friction stir processing
- (2014) Kazuhiro Ito et al. MATERIALS & DESIGN
- Effect of rotation speeds on microstructures and tensile properties of submerged friction stir processed AZ31 magnesium alloy
- (2014) F. Chai et al. MATERIALS RESEARCH INNOVATIONS
- A review of numerical analysis of friction stir welding
- (2014) Xiaocong He et al. PROGRESS IN MATERIALS SCIENCE
- Nanostructured Co–Cr–Fe alloy surface layer fabricated by combination of laser clad and friction stir processing
- (2014) Ruidi Li et al. SURFACE & COATINGS TECHNOLOGY
- Fatigue life improvement by friction stir processing of 5083 aluminium alloy MIG butt welds
- (2014) L.P. Borrego et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0.1CoCrFeNi High Entropy Alloy
- (2014) M. Komarasamy et al. Materials Research Letters
- Enhancing the Mechanical Properties of AE42 Magnesium Alloy through Friction Stir Processing
- (2013) Harpreet Singh Arora et al. ADVANCED ENGINEERING MATERIALS
- Surface nitriding on Ti–6Al–4V alloy via friction stir processing method under nitrogen atmosphere
- (2013) Bo Li et al. APPLIED SURFACE SCIENCE
- Surface modification of hydroturbine steel using friction stir processing
- (2013) H.S. Grewal et al. APPLIED SURFACE SCIENCE
- Fatigue life improvement of mig welded aluminium T-joints by friction stir processing
- (2013) J.D.M. Costa et al. INTERNATIONAL JOURNAL OF FATIGUE
- Formation of long-period stacking ordered phase only within grains in Mg–Gd–Y–Zn–Zr casting by friction stir processing
- (2013) Q. Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evaluation of Tensile Deformation Properties of Friction Stir Processed Pure Copper: Effect of Processing Parameters and Pass Number
- (2013) Mohsen Barmouz et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Achieving Large-area Bulk Ultrafine Grained Cu via Submerged Multiple-pass Friction Stir Processing
- (2013) P. Xue et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Yttrium Addition on Microstructural Characteristics and Superplastic Behavior of Friction Stir Processed ZK60 Alloy
- (2013) Z.A. Luo et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Investigation of the effects of thread pitch and water cooling action on the mechanical strength and microstructure of friction stir processed AZ31
- (2013) A. Alavi Nia et al. MATERIALS & DESIGN
- Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing
- (2013) J. da Silva et al. MATERIALS & DESIGN
- Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys
- (2013) Beytullah Gungor et al. MATERIALS & DESIGN
- Investigation on the effect of friction stir processing on the superplastic forming of AZ31B alloy
- (2013) S. Ramesh Babu et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of multi-pass friction stir processed aluminum alloy 6063
- (2013) Khaled J. Al-Fadhalah et al. MATERIALS & DESIGN
- Achieving ultrafine-grained structure in a pure nickel by friction stir processing with additional cooling
- (2013) P. Xue et al. MATERIALS & DESIGN
- Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219
- (2013) Xiuli Feng et al. MATERIALS CHARACTERIZATION
- Lowering the temperature for high strain rate superplasticity in an Al–Mg–Zn–Cu alloy via cooled friction stir processing
- (2013) A. Orozco-Caballero et al. MATERIALS CHEMISTRY AND PHYSICS
- Modification of long period stacking ordered phase and improvement of mechanical properties of Mg–Gd–Zn–Zr alloy by friction stir processing
- (2013) X.W. Li et al. MATERIALS LETTERS
- Achieving ultrafine dual-phase structure with superior mechanical property in friction stir processed plain low carbon steel
- (2013) P. Xue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strain rate superplasticity of a fine-grained AZ91 magnesium alloy prepared by submerged friction stir processing
- (2013) Fang Chai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplasticity of the rolled and friction stir processed Al–4.5 Mg–0.35Sc–0.15Zr alloy
- (2013) Anton Smolej et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface modification of A390 hypereutectic Al–Si cast alloys using friction stir processing
- (2013) T.S. Mahmoud SURFACE & COATINGS TECHNOLOGY
- Surface modification of Ti–6Al–4V alloy via friction-stir processing: Microstructure evolution and dry sliding wear performance
- (2013) Bo Li et al. SURFACE & COATINGS TECHNOLOGY
- Tribological enhancement of AISI 420 martensitic stainless steel through friction-stir processing
- (2013) S. Dodds et al. WEAR
- Microstructure and tensile behavior of a friction stir processed magnesium alloy
- (2012) Bilal Mansoor et al. ACTA MATERIALIA
- Low temperature enhanced ductility of friction stir processed 5083 aluminum alloy
- (2012) Ehab A. El-Danaf et al. BULLETIN OF MATERIALS SCIENCE
- Corrosion behavior of a friction stir processed rare-earth added magnesium alloy
- (2012) G.R. Argade et al. CORROSION SCIENCE
- Enhanced superplasticity in friction stir processed Mg–Gd–Y–Zr alloy
- (2012) Q. Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082
- (2012) Magdy M. El-Rayes et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High Strain Rate Superplasticity in a Micro-grained Al–Mg–Sc Alloy with Predominant High Angle Grain Boundaries
- (2012) F.C. Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Submerged friction stir processing of AZ31 Magnesium alloy
- (2012) Basil Darras et al. MATERIALS & DESIGN
- Effect of overlapping ratio on mechanical properties and formability of friction stir processed Mg AZ31B alloy
- (2012) G. Venkateswarlu et al. MATERIALS & DESIGN
- Improvement of mechanical properties of a cast Al–Si base alloy by friction stir processing
- (2012) F.Y. Tsai et al. MATERIALS LETTERS
- Grain size and texture effects on deformation behavior of AZ31 magnesium alloy
- (2012) W. Yuan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of microstructural, mechanical and tribological characteristics of A413 cast Al alloys using friction stir processing
- (2012) T.S. Mahmoud et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding
- (2012) Yao Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of texture on superplastic behavior of friction stir processed ZK60 magnesium alloy
- (2012) Q. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of friction stir processing on microstructure and mechanical properties of aluminium
- (2012) Devinder Yadav et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet
- (2012) Rui-dong Fu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strain rate superplasticity in friction stir processed ultrafine grained Mg–Al–Zn alloys
- (2012) A. Mohan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructural inhomogeneity on superplastic behaviour of multipass friction stir processed aluminium alloy
- (2012) S. Pradeep et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of friction stir processing on the tensile and fatigue behavior of a cast A206 alloy
- (2012) R. Kapoor et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy
- (2012) A. G. Rao et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Superplasticity and microstructural stability in a Mg alloy processed by hot rolling and friction stir processing
- (2012) V. Jain et al. SCRIPTA MATERIALIA
- Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings
- (2012) M. Yu et al. SURFACE & COATINGS TECHNOLOGY
- Composite fabrication using friction stir processing—a review
- (2011) H. S. Arora et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Model to Predict the Resulting Grain Size of Friction-Stir-Processed AZ31 Magnesium Alloy
- (2011) Basil M. Darras JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and mechanical properties of friction stir processed ODS ferritic steels
- (2011) Sanghoon Noh et al. JOURNAL OF NUCLEAR MATERIALS
- Comparison of corrosion behaviour of friction stir processed and laser melted AA 2219 aluminium alloy
- (2011) K. Surekha et al. MATERIALS & DESIGN
- Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloy
- (2011) Sima Ahmad Alidokht et al. MATERIALS CHARACTERIZATION
- Effect of overlapping direction in multipass friction stir processing
- (2011) J. Gandra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of nanocrystalline structure in Cu during friction stir processing (FSP)
- (2011) Jian-Qing Su et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplasticity governed by effective grain size and its distribution in fine-grained aluminum alloys
- (2011) F.C. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite
- (2011) Ranjit Bauri et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical behavior of friction stir processed ultrafine grained Al–Mg–Sc alloy
- (2011) N. Kumar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characterisation of friction stir processed aluminium
- (2011) D Yadav et al. MATERIALS SCIENCE AND TECHNOLOGY
- Superplastic Behavior of Friction Stir Processed ZK60 Magnesium Alloy
- (2011) G. M. Xie et al. MATERIALS TRANSACTIONS
- Some Observations on Microstructural Changes in a Mg-Based AE42 Alloy Subjected to Friction Stir Processing
- (2011) Harpreet Singh Arora et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties
- (2011) A. Simar et al. PROGRESS IN MATERIALS SCIENCE
- Friction stir processing (FSP): refining microstructures and improving properties
- (2011) T. R. McNelley REVISTA DE METALURGIA
- Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al–Cu alloys
- (2011) Xiuli Feng et al. SCRIPTA MATERIALIA
- Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy
- (2011) W. Yuan et al. SCRIPTA MATERIALIA
- Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing
- (2010) Z.Y. Ma et al. ACTA MATERIALIA
- Corrosion properties of friction–stir processed cast NiAl bronze
- (2010) D.R. Ni et al. CORROSION SCIENCE
- Finite element modeling for maximum temperature in friction stir welding and its validation
- (2010) P. Prasanna et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural and mechanical properties of friction-stir-welded and post-heat-treated Inconel 718 alloy
- (2010) K.H. Song et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhanced mechanical properties of Mg–Gd–Y–Zr casting via friction stir processing
- (2010) B.L. Xiao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of vacuum heat treatment on microstructure and microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites
- (2010) Wen-Ya Li et al. MATERIALS & DESIGN
- Investigation of superplasticity in friction stir processed 2219Al alloy
- (2010) F.C. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of nanograin in IF steels by friction stir processing
- (2010) A. Chabok et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy
- (2010) Saumyadeep Jana et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Texture Evolution during Friction Stir Processing of Fully Lamellar Ti-6Al-4V
- (2010) A. L. Pilchak et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Model for grain evolution during friction stir welding of aluminium alloys
- (2010) J. D. Robson et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy
- (2010) W. Yuan et al. SCRIPTA MATERIALIA
- Realization of exceptionally high elongation at high strain rate in a friction stir processed Al–Zn–Mg–Cu alloy with the presence of liquid phase
- (2010) K. Wang et al. SCRIPTA MATERIALIA
- The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate
- (2010) Qiang Wang et al. SURFACE & COATINGS TECHNOLOGY
- Fabrication of nanostructured tool steel layer by combination of laser cladding and friction stir processing
- (2010) Yoshiaki Morisada et al. SURFACE & COATINGS TECHNOLOGY
- MODELING AND SIMULATION OF DYNAMIC RECRYSTALLIZATION AND GRAIN GROWTH DURING HOT WORKING OF INCONEL 783 SUPERALLOY
- (2010) JONG-TAEK YEOM et al. SURFACE REVIEW AND LETTERS
- Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent aging
- (2009) A.H. Feng et al. ACTA MATERIALIA
- Effect of friction stir processing on fatigue behavior of an investment cast Al–7Si–0.6 Mg alloy
- (2009) S. Jana et al. ACTA MATERIALIA
- Fatigue behaviour of cast magnesium alloy AZ91 microstructurally modified by friction stir processing
- (2009) Y. UEMATSU et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Achieving high strain rate superplasticity in cast 7075Al alloy via friction stir processing
- (2009) F. C. Liu et al. JOURNAL OF MATERIALS SCIENCE
- Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 600
- (2009) K.H. Song et al. MATERIALS & DESIGN
- Effect of friction stir processing on corrosion resistance of aluminum–copper alloy gas tungsten arc welds
- (2009) K. Prasad Rao et al. MATERIALS & DESIGN
- On the role of process variables in the friction stir processing of cast aluminum A319 alloy
- (2009) L. Karthikeyan et al. MATERIALS & DESIGN
- Effect of precipitation on post-heat-treated Inconel 625 alloy after friction stir welding
- (2009) K.H. Song et al. MATERIALS & DESIGN
- Evaluation of microstructure and mechanical properties in friction stir processed SKD61 tool steel
- (2009) Y.C. Chen et al. MATERIALS CHARACTERIZATION
- Microstructural refinement of a cast hypereutectic Al–30Si alloy by friction stir processing
- (2009) A.G. Rao et al. MATERIALS LETTERS
- Analysis of first mode metal transfer in A413 cast aluminum alloy during friction stir processing
- (2009) L. Karthikeyan et al. MATERIALS LETTERS
- Inhomogeneous microstructure and mechanical properties of friction stir processed NiAl bronze
- (2009) D.R. Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural modification and ductility enhancement of surfaces modified by FSP in aluminium alloys
- (2009) F. Nascimento et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling the microstructural evolution and effect of cooling rate on the nanograins formed during the friction stir processing of Al5083
- (2009) A. Yazdipour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multi-pass friction stir welding in alloy 7050-T7451: Effects on weld response variables and on weld properties
- (2009) Rebecca Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Partial recrystallization in the nugget zone of friction stir welded dual-phase Cu–Zn alloy
- (2009) G.M. Xie et al. PHILOSOPHICAL MAGAZINE
- Effect of stress ratio on the fatigue behavior of a friction stir processed cast Al–Si–Mg alloy
- (2009) S. Jana et al. SCRIPTA MATERIALIA
- Enhancing the high-cycle fatigue strength of Mg–9Al–1Zn casting by friction stir processing
- (2009) D.R. Ni et al. SCRIPTA MATERIALIA
- Low-temperature superplasticity of Al–Mg–Sc alloy produced by friction stir processing
- (2009) F.C. Liu et al. SCRIPTA MATERIALIA
- Contribution of grain boundary sliding in low-temperature superplasticity of ultrafine-grained aluminum alloys
- (2009) F.C. Liu et al. SCRIPTA MATERIALIA
- Effect of friction stir processing on the tribological performance of high carbon steel
- (2009) S.H. Aldajah et al. WEAR
- Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy
- (2008) W. Woo et al. ACTA MATERIALIA
- Microstructural evolution during friction stir-processing of pure iron
- (2008) S. Mironov et al. ACTA MATERIALIA
- Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite
- (2008) A FENG et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of Ball Milling of Feedstock Powder on Microstructure and Properties of TiN Particle-Reinforced Al Alloy-Based Composites Fabricated by Cold Spraying
- (2008) W.-Y. Li et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Mechanical property and microstructural changes during friction stir processing of cast aluminum 2285 alloy
- (2008) L. Karthikeyan et al. MATERIALS & DESIGN
- Nanostructured tool steel fabricated by combination of laser melting and friction stir processing
- (2008) Y. Morisada et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy
- (2008) Z.Y. Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Effect of Friction Stir Processing on the Microstructure and Mechanical Properties of an Aluminum Lithium Alloy
- (2008) Tanya L. Giles et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Friction Stir Processing Technology: A Review
- (2008) Z.Y. Ma METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Using high-pressure torsion for metal processing: Fundamentals and applications
- (2008) A ZHILYAEV et al. PROGRESS IN MATERIALS SCIENCE
- Recent advances in friction-stir welding – Process, weldment structure and properties
- (2008) R NANDAN et al. PROGRESS IN MATERIALS SCIENCE
- Achieving exceptionally high superplasticity at high strain rates in a micrograined Al–Mg–Sc alloy produced by friction stir processing
- (2008) F.C. Liu et al. SCRIPTA MATERIALIA
- Producing nanograined microstructure in Mg–Al–Zn alloy by two-step friction stir processing
- (2008) C CHANG et al. SCRIPTA MATERIALIA
- Low-temperature superplasticity of friction stir processed Al–Zn–Mg–Cu alloy
- (2008) F.C. Liu et al. SCRIPTA MATERIALIA
- Fatigue crack growth behavior of friction stir processed aluminum alloy
- (2008) S SHARMA et al. SCRIPTA MATERIALIA
- Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy
- (2008) K. Surekha et al. SURFACE & COATINGS TECHNOLOGY
- Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating
- (2007) W.-Y. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A conceptual model for the process variables related to heat generation in friction stir welding of aluminum
- (2007) Kevin J. Colligan et al. SCRIPTA MATERIALIA
- Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
- (2007) T.R. McNelley et al. SCRIPTA MATERIALIA
- Thermal modelling of friction stir welding
- (2007) H.B. Schmidt et al. SCRIPTA MATERIALIA
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now