Article
Chemistry, Multidisciplinary
Xiujuan Wang, Hui Li, Tanyu Wang, Xin Niu, Yu Wang, Siyi Xu, Yaming Jiang, Li Chen, Hao Liu
Summary: Flexible wearable pressure sensors have significant potential in various applications, but developing sensors with high sensitivity, fast response, and reliable stability through a simple fabrication process remains a challenge. In this study, a simple and efficient method was developed to fabricate lightweight three-dimensional piezoresistive sensing materials, and the assembled pressure sensor demonstrated high sensitivity, wide working range, fast response time, and reliable repeatability.
Article
Nanoscience & Nanotechnology
Qinghua Yu, Chuanli Su, Siyi Bi, Yaoli Huang, Jianna Li, Huiqi Shao, Jinhua Jiang, Nanliang Chen
Summary: In this study, composite materials using different fabrics and MXene nanosheets were prepared through room temperature impregnation. The Ti3C2Tx@NWF composite was found to be the optimal flexible pressure sensor, demonstrating high sensitivity, a wide sensing range, fast response/recovery times, and excellent durability. The findings provide a basis for the rational design of MXene/textile composites as wearable pressure sensors and demonstrate the potential of these sensors in monitoring human motion and locating pressure accurately.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Engineering, Environmental
Xu Guo, Yanfen Lu, Danchen Fu, Chuying Yu, Xinguo Yang, Wenbin Zhong
Summary: This paper proposes a new strategy for preparing poly(amidoxime)/polyethyleneimine (PAO/PEI) hydrogel through hydrogen bond interactions. The hydrogel exhibits excellent mechanical stability and conductivity, making it suitable for wearable sensing devices and energy storage/conversion devices.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Electrical & Electronic
Guodong Wang, Jiajia Yan, Xiaofeng Yang, Xinlin Qing
Summary: A resistive pressure sensor based on a composite conductive layer is developed in this paper, using PDMS as the matrix and SAP(+) as the conductive filler. The improved sensor shows significant improvements in sensitivity, response time, and stability.
IEEE SENSORS JOURNAL
(2022)
Article
Engineering, Electrical & Electronic
Ricardo dos Santos Pereira, Carlos Alberto Cima
Summary: This article introduces a method for thermal compensation of pressure sensors using only the electrical signal produced by the sensors themselves, which has proven to be effective in reducing measurement errors.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2021)
Article
Chemistry, Physical
Shengping Dai, Hao Zhu, Jiayi Bai, Hongyu Bai, Ningyi Yuan
Summary: A washable and sensitivity flexible piezoresistive pressure sensor was developed using a 3D porous structure carbon nanotube (CNT)/carbon black (CB) sponge. The sensor exhibited high sensitivity, long-term stability, and superior washable stability. It was used for various human motion monitoring applications and could be connected to a bluetooth module for real-time gait characteristic monitoring to prevent foot membrane inflammation.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2023)
Article
Engineering, Electrical & Electronic
Thibault P. Delhaye, Nicolas Andre, Laurent A. Francis, Denis Flandre
Summary: This article introduces a new classification methodology for high resolution membrane based MEMS piezoresistive pressure sensors, based on a new figure of merit (FoM) that allows for evaluating the ultimate limit of detection of a technology. The proposed FoM is validated through extensive literature survey and comparisons, showing that wet etching techniques outperform reactive ion etching in membrane release for higher performance.
IEEE SENSORS JOURNAL
(2021)
Article
Engineering, Electrical & Electronic
Xi Wu, Jun Yuan, Xuan-qi Guo, Li-jun Ma, Guo-qiang Wu, Gary J. Cheng, Yong Liu, Feng Liu
Summary: The study developed a highly sensitive flexible piezoresistive sensor using carbonized Fe3O4@MIL-100(Fe) as composite conductive nanomaterial and a laser-processed template. The sensor exhibited high sensitivity, good stability, fast response and recovery time, and resistance to electromagnetic interference, making it suitable for health monitoring.
ACS APPLIED ELECTRONIC MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Ying Yi, Ayman Samara, Bo Wang
Summary: This paper introduces a cost-effective method to fabricate ultra-thin and highly sensitive piezoresistive strain sensors, showing significantly improved performance metrics compared to sensors fabricated by more complex methods. The proposed fabrication method and the resulting ultra-thin sensor prototype may benefit the design and mass production of future wearable biomedical and healthcare sensors.
JOURNAL OF MATERIALS SCIENCE
(2021)
Article
Engineering, Multidisciplinary
Zhenjian Yao, Yongsheng Li, Yifan Ding, Chenchen Wang, Lei Yao, Jinlin Song
Summary: This paper proposes an improved shock tube method for accurately calibrating the sensitivity characteristics of piezoresistive pressure sensors in dynamic conditions. By compensating the shock wave pressure and correcting the response signal, it effectively reduces the impact of non-ideal shock waves and complex noises on the calibration results.
Article
Chemistry, Physical
Sudeep Sharma, Ashok Chhetry, Pukar Maharjan, Shipeng Zhang, Kumar Shrestha, Md Sharifuzzaman, Trilochan Bhatta, Youngdo Shin, Dongkyun Kim, Sanghyun Lee, Jae Yeong Park
Summary: This paper proposes a new type of highly sensitive pressure sensor based on hybridized nanofibrous membrane technology, which overcomes the limitations of existing piezoresistive sensors and has high sensitivity and wide pressure range response. The sensor has broad application prospects in the field of electronic skin and wearable electronic devices.
Article
Multidisciplinary Sciences
Jiawei Wang, Jin Li, Shengqi Sun, Haiyun Dong, Lan Wu, Engui Zhao, Feng He, Xing Ma, Yong Sheng Zhao
Summary: In this study, the diffusion dynamics in polymer micro-objects are detected in situ by utilizing optical whispering-gallery mode resonances. The interactions between solvent molecules and polymer microspheres, such as sorption, diffusion, and swelling, are quantitatively analyzed through mode tracking. A turning point of mode response is observed when diffusion exceeds the sub-wavelength-thick outermost layer and starts penetrating the inner core. The estimated solubility in the glassy polymer agrees with the predicted value using Flory-Huggins theory. Besides, non-Fickian contribution is analyzed in the glassy polymer-penetrant system. This work represents a high-precision and label-free approach to describing characteristics in diffusion dynamics.
Article
Engineering, Electrical & Electronic
Vinod Belwanshi, Sebin Philip, Anita Topkar
Summary: This study designed and fabricated three types of piezoresistive pressure sensors using different process technologies. The sensors were tested under elevated temperature and pressure conditions, and it was found that the sensors with oxide isolated polysilicon piezoresistors demonstrated the best performance.
IEEE SENSORS JOURNAL
(2022)
Article
Mechanics
Dongik Kam, Seungin Oh, Jin-Gyun Kim, Dongwhi Choi
Summary: With the advancement of robotics and wearable devices, enhancing the sensitivity of piezoresistive pressure sensors to sense subtle stimuli has become crucial. This study introduces a 3D meso-structured sensor that exhibits significantly improved sensitivity compared to conventional 2D sensors, achieved through mechanical buckling assisted 3D structure formation. The sensor's sensitivity improvement is related to the developed tensile strain and its thickness can be adjusted for performance tuning.
COMPOSITE STRUCTURES
(2023)
Article
Engineering, Electrical & Electronic
Chengwu Gao, Xuanqing Hua, Dacheng Zhang
Summary: In this article, a rapid thermal process is proposed to manufacture piezoresistance for improved performance of piezoresistive devices. An absolute piezoresistive pressure sensor is prepared by anodic bonding between a silicon film and glass with a cavity, resulting in a compact size of 1.0 x 1.0 x 0.513 mm. The piezoresistance arrangement is optimized using the finite element method, and the feasibility of Ti as an oxygen absorber in the anodic bonding process is verified through diaphragm deformation measurement. The pressure sensor prepared using the rapid thermal annealing (RTP) process exhibits an output voltage of 91.6 mV, nonlinearity of 0.14% FSO, temperature coefficient of resistance (TCR) of 571 ppm/degrees C, and temperature coefficient of sensitivity (TCS) of -1676 ppm/degrees C within the pressure range of 0-200 kPa. Compared to the pressure sensor prepared by the common piezoresistive process, the designed sensor shows a reduced TCR by 73% and TCS by 24%, while providing high output voltage, low TCR and TCS, and a small size.
IEEE SENSORS JOURNAL
(2023)
Article
Engineering, Multidisciplinary
Liu Zeng, Zhi YuSong, Zhang ShaoHui, Li Shan, Yan ZuYong, Gao Ang, Zhang ShiYu, Guo DaoYou, Wang Jun, Wu ZhenPing, Li PeiGang, Tang WeiHua
Summary: In this study, beta-Ga2O3 thin films were prepared using metal-organic chemical vapor deposition to construct planar Ti/β-Ga2O3/Ni Schottky photodiode detectors with varying on-state resistances. The devices demonstrated state-of-the-art performances with high responsivity, detectivity, and quantum efficiency, showing a dependence on the on-state resistance for optimal performance.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES
(2021)
Article
Engineering, Environmental
Jingchun Lv, Zeng Liu, Long Zhang, Kaikai Li, Shaohui Zhang, Hong Xu, Zhiping Mao, Haifeng Zhang, Jiafan Chen, Gebo Pan
Summary: This paper presents a fabrication strategy for a multifunctional e-textile based on polypyrrole and rose-like silver flower-decorated fabric, which can be used to construct a multi-layer pressure/strain sensor, accurately monitor various physiological signals, and fabricate all-solid-state supercapacitors with excellent sensing and energy storage behaviors.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Materials Science, Multidisciplinary
Ang Gao, Weiyu Jiang, Guoliang Ma, Zeng Liu, Shan Li, Zuyong Yan, Weiming Sun, Shaohui Zhang, Weihua Tang
Summary: A stable lead-free CsCu2I3 film was successfully prepared and coupled with Ga2O3 to create a deep ultraviolet photodetector. The photodetector showed sensitivity to 254 nm UV light, good reproducibility, and an ultra-high PDCR.
CURRENT APPLIED PHYSICS
(2022)
Article
Physics, Multidisciplinary
Tong Mei, Shan Li, Shaohui Zhang, Yuanyuan Liu, Peigang Li
Summary: This paper describes the performance of an epsilon-Ga2O3 film/ZnO nanoparticle hybrid heterojunction deep UV photodetector for 254 nm wavelength sensing. The photodetector can operate in both power supply mode and self-powered mode, delivering excellent photoelectrical properties in each. The results lay a solid foundation for the application of epsilon-Ga2O3/ZnO heterojunction in deep UV sensors.
Article
Materials Science, Coatings & Films
Kaikai Li, Yingxi Xie, Jiang Lei, Shaohui Zhang, Zeng Liu, Longsheng Lu
Summary: This study reports the natural superhydrophobicity of purple orchid leaves and presents an eco-friendly strategy to fabricate biomimetic superhydrophobic surfaces. The surfaces have excellent liquid repellency, low adhesion, and enhanced mechanical stability through a synergistic effect of nanoscale organometallic coatings and laser-patterned microstructures.
SURFACE & COATINGS TECHNOLOGY
(2021)
Article
Materials Science, Multidisciplinary
Lifan Nie, Long Zhang, Quan Zhou, Zi 'ang Zhang, Zhaobo Dong, Qingyi Liu, Limei Yang, Shaohui Zhang, Zeng Liu, Gebo Pan
Summary: This paper presents a method to synthesize BaTiO3 nanowires using barium carbonate powder as a Ba2+ sustained release agent to achieve high aspect ratio nanowires. Characterization of the obtained samples was conducted using XRD, SEM, etc. The method shows significant advantages in large-scale production and high consistency.
Review
Chemistry, Multidisciplinary
Ye Wang, Xiang Long Huang, Hanwen Liu, Weiling Qiu, Chi Feng, Ce Li, Shaohui Zhang, Hua Kun Liu, Shi Xue Dou, Zhiming M. Wang
Summary: Room-temperature sodium-sulfur (RT Na-S) batteries are a competitive electrochemical energy storage system. Recent studies have shown that nanostructural designs can address the challenges faced by RT Na-S batteries. This review explores the advancements in nanostructure engineering strategies of S-based cathode materials in the past decade and discusses future prospects.
Article
Instruments & Instrumentation
Zeng Liu, Shaohui Zhang, Maolin Zhang, Junpeng Fang, Ling Du, Jian Zhang, Chang Xu, Yufeng Guo, Weihua Tang
Summary: In this paper, a Ga2O3-based pressure sensor is introduced using the technique of metalorganic chemical vapor deposition thin film growth. Although Ga2O3 is an important semiconductor material for functional electronics and optoelectronics, there has been limited research on Ga2O3-based pressure sensors. However, this study demonstrates that the fabricated Ga2O3-based pressure sensor exhibits good sensing performance for different pressures. The sensor shows an increase in current by two orders of magnitude under a pressure of 5 kPa. Additionally, the response/release times were measured under different pressures ranging from 1 to 20 kPa. This work provides a potential method for constructing smart pressure sensors based on functional Ga2O3.
SMART MATERIALS AND STRUCTURES
(2023)
Article
Materials Science, Multidisciplinary
Chang Xu, Jian Zhang, Huanjun Lu, Xiao Li, Jingchun Lv, Shaohui Zhang
Summary: In this study, one-dimensional conductive MOFs Ni3(HHTP)2 with nanorod-like morphology on the surface of a woven fabric were synthesized using an in-situ growth method. The effects of substrate concentration, scan rate, and current density on electrode properties were investigated using a three-electrode system. The results showed that the material demonstrated excellent area capacitance and maintained a high percentage of specific capacitance even at increased current density. The study also revealed that the material had the lowest internal transfer resistance and the best conductivity.
Article
Chemistry, Multidisciplinary
Xiang Long Huang, Hong Zhong, Ce Li, Yaojie Lei, Shaohui Zhang, Yuhan Wu, Wenli Zhang, Hua Kun Liu, Shi Xue Dou, Zhiming M. Wang
Summary: In this work, a double design host and guest strategy is proposed to enhance the electrochemical properties of sulfur electrodes in sodium ion storage. The V2O3 adsorbent immobilizes sulfur species, while the selenium dopant improves the electronic conductivity and redox conversion of sulfur cathodes. The synergistic effect between the V2O3 adsorbent and selenium dopant inhibits the shuttle effect and improves the redox kinetics, resulting in greatly enhanced Na-ion storage properties of sulfur cathodes. The as-designed sulfur cathode exhibits excellent rate capability of 663 mA h g(-1) at 2.0 A g(-1) and exceptional cyclability of 405 mA h g(-1) over 700 cycles at 1.0 A g(-1).
Article
Materials Science, Multidisciplinary
Jian Zhang, Chang Xu, Jing Li, Huanjun Lu, Shaohui Zhang, Chao Wang
Summary: In this paper, Cu-/Ni-based one-dimensional (1D) conductive metal-organic frameworks (c-MOFs) nanorods (Cu3(HHTP)2/Ni3(HHTP)2) were successfully synthesized via a one-pot hydrothermal method. The performance of Cu3(HHTP)2-/Ni3(HHTP)2- based resistive temperature sensors was studied by sensing platforms, investigating the effect of reaction time, MOFs compositions, and solvent ratio. The results demonstrated that Cu3(HHTP)2-based sensor provided the optimal performance, with a near-linear decrease of relative variation of resistance (RVR) by 85.9% from 20 degrees C to 80 degrees C, and a temperature coefficient of resistance (TCR) reaching -0.0157 degrees C-1. The study highlights the excellent conductivity and high thermo-responsive sensitivity of Ni3(HHTP)2-based 1D c-MOFs for temperature sensor fabrication.
Article
Engineering, Environmental
Yinhua Cui, Qingshan Shi, Zeng Liu, Jingchun Lv, Chao Wang, Xiaobao Xie, Shaohui Zhang
Summary: In this study, a new approach is proposed to prepare flexible MXene/biomass/chitosan aerogel (MBC) electrodes with pseudo-capacitive properties through electro-static self-assembly and hydrothermal methods. The MBC-6 electrode, annealed by lyophilization, exhibits a volumetric specific capacitance of 1801.4 mF/cm3 and an ultra-high volume energy density of 33.4 Wh/L. This research presents a plausible approach for creating energy storage devices with high energy density and voltage window.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Physics, Applied
Li Wang, Chang Xu, Shaohui Zhang, Shang Chen, Hao Wang, Zhaojun Duan, Omar A. Al-Hartomy, Swelm Wageh, Xiaosha Wen, Yi Liu, Yi Lin, Huijie Pu, Zhongjian Xie, Quan Liu, Han Zhang, Dixian Luo
Summary: Researchers have developed a new mpox biosensor that combines the CRISPR/Cas12b system and ultrasensitive graphene field-effect transistor (gFET) for amplification-free nucleic acid detection. The sensitivity of this method is approximately 1 aM, with a detection time of about 20 minutes. This technology has important implications for the rapid diagnosis of MPXV and other DNA viruses.
APPLIED PHYSICS REVIEWS
(2023)
Article
Chemistry, Inorganic & Nuclear
Xiang Long Huang, Pan Xiang, Hanwen Liu, Chi Feng, Shaohui Zhang, Ziqi Tian, Hua Kun Liu, Shi Xue Dou, Zhiming Wang
Summary: The achievement of high-performance room-temperature sodium-sulfur batteries requires the fabrication of multifunctional sulfur electrodes through proper materials design strategies. In this study, a functionalized sulfur cathode was created by in situ implantation of polar MnO nanoparticles into carbon microspheres self-assembled by porous nanorods. The as-designed sulfur cathode exhibits excellent cycling performance and specific capacity.
INORGANIC CHEMISTRY FRONTIERS
(2022)
Article
Chemistry, Multidisciplinary
Xiang Long Huang, Xiaofeng Zhang, Mingjie Yi, Ye Wang, Shaohui Zhang, Shaokun Chong, Hua Kun Liu, Shi Xue Dou, Zhiming Wang
Summary: The development of emerging Na-Se batteries is hindered by technical bottlenecks such as polyselenide shuttling and material volume variation. In this study, a nanorod-like trimodal hierarchical porous carbon (THPC) host is fabricated for advanced Na-Se batteries. The THPC possesses a trimodal nanopore structure and functions as a good accommodator of Se molecules, a reservoir of polyselenide intermediates, a buffer for volume expansion, and a promoter for electron/ion transfer.