Wide range humidity sensors printed on biocomposite films of cellulose nanofibril and poly(ethylene glycol)

Functionalized Cellulose for Water Purification, Antimicrobial Applications, and Sensors

(2018) Kevin Bethke et al.   ADVANCED FUNCTIONAL MATERIALS

Dramatically enhanced strain- and moisture-sensitivity of bioinspired fragmentized carbon architectures regulated by cellulose nanocrystals

(2018) Huaquan Wang et al.   CHEMICAL ENGINEERING JOURNAL

An approach to prepare mechanically robust full IPN strengthened conductive cotton fabric for high strain tolerant electromagnetic interference shielding

(2018) Sabyasachi Ghosh et al.   CHEMICAL ENGINEERING JOURNAL

Carbon Nanostructures Based Mechanically Robust Conducting Cotton Fabric for Improved Electromagnetic Interference Shielding

(2018) Sabyasachi Ghosh et al.   FIBERS AND POLYMERS

Structural, electrical and optical properties of (biopolymer blend/titanium carbide) nanocomposites for low cost humidity sensors

(2018) Ahmed Hashim et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS

A high performance humidity sensor based on surface acoustic wave and graphene oxide on AlN/Si layered structure

(2018) Xianhao Le et al.   SENSORS AND ACTUATORS B-CHEMICAL

Research Advances in Microfiber Humidity Sensors

(2018) Yun Peng et al.   Small

Pulping and Pretreatment Affect the Characteristics of Bagasse Inks for Three-dimensional Printing

(2018) Gary Chinga-Carrasco et al.   ACS Sustainable Chemistry & Engineering

Flexible and Anisotropic Strain Sensor Based on Carbonized Crepe Paper with Aligned Cellulose Fibers

(2018) Sheng Chen et al.   ADVANCED FUNCTIONAL MATERIALS

Humidity Sensor Based on Keratin bio Polymer Film

(2018) H. Hamouche et al.   SENSORS AND ACTUATORS A-PHYSICAL

A real-time humidity sensor based on a microwave oscillator with conducting polymer PEDOT:PSS film

(2018) Tae-Gyu Kang et al.   SENSORS AND ACTUATORS B-CHEMICAL

Dew point measurements using montmorillonite (MTT) and molybdenum disulfide (MoS2) coated QCM sensors

(2018) Ning Li et al.   SENSORS AND ACTUATORS B-CHEMICAL

Enhancing the performance of vanadyl phthalocyanine-based humidity sensor by varying the thickness

(2018) Nur Adilah Roslan et al.   SENSORS AND ACTUATORS B-CHEMICAL

Organic Thin-Film Capacitive and Resistive Humidity Sensors: A Focus Review

(2018) Mansoor Ani Najeeb et al.   Advanced Materials Interfaces

E-waste in the international context – A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery

(2018) I.M.S.K. Ilankoon et al.   WASTE MANAGEMENT

Recovery of precious metals from electronic waste and spent catalysts: A review

(2018) Yunji Ding et al.   RESOURCES CONSERVATION AND RECYCLING

Nanocellulose-templated assembly of polyaniline in natural rubber-based hybrid elastomers toward flexible electronic conductors

(2018) Jingquan Han et al.   INDUSTRIAL CROPS AND PRODUCTS

Mechanical characteristics of nanocellulose-PEG bionanocomposite wound dressings in wet conditions

(2017) Fengzhen Sun et al.   Journal of the Mechanical Behavior of Biomedical Materials

Paper: A promising material for human-friendly functional wearable electronics

(2017) Hao Liu et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Recent Developments in Fiber Optics Humidity Sensors

(2017) Joaquin Ascorbe et al.   SENSORS

Environmentally-friendly cellulose nanofibre sheets for humidity sensing in microwave frequencies

(2017) Guy Ayissi Eyebe et al.   SENSORS AND ACTUATORS B-CHEMICAL

Effect of Water Vapor Adsorption on Electrical Properties of Carbon Nanotube/Nanocrystalline Cellulose Composites

(2016) Salman Safari et al.   ACS Applied Materials & Interfaces

A review of sugarcane bagasse for second-generation bioethanol and biopower production

(2016) Tais Lacerda Bezerra et al.   Biofuels Bioproducts & Biorefining-Biofpr

An investigation of Pseudomonas aeruginosa biofilm growth on novel nanocellulose fibre dressings

(2016) Lydia C. Powell et al.   CARBOHYDRATE POLYMERS

Producing ultrapure wood cellulose nanofibrils and evaluating the cytotoxicity using human skin cells

(2016) Henriette Rogstad Nordli et al.   CARBOHYDRATE POLYMERS

Humidity sensing performance of spin coated polyaniline–carboxymethyl cellulose composite at room temperature

(2016) S. Kotresh et al.   CELLULOSE

Nanocellulose-assisted dispersion of graphene to fabricate poly(vinyl alcohol)/graphene nanocomposite for humidity sensing

(2016) Shuman Xu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Translucent and ductile nanocellulose-PEG bionanocomposites—A novel substrate with potential to be functionalized by printing for wound dressing applications

(2016) Zari Tehrani et al.   INDUSTRIAL CROPS AND PRODUCTS

Use of nanocellulose in printed electronics: a review

(2016) Fanny Hoeng et al.   Nanoscale

Fabrication and investigation of cellulose acetate-copper oxide nano-composite based humidity sensors

(2016) Muhammad Tariq Saeed Chani et al.   SENSORS AND ACTUATORS A-PHYSICAL

Cellulose nanocrystal/graphene oxide composite film as humidity sensor

(2016) Abdullahil Kafy et al.   SENSORS AND ACTUATORS A-PHYSICAL

Recent trends of ceramic humidity sensors development: A review

(2016) T.A. Blank et al.   SENSORS AND ACTUATORS B-CHEMICAL

Role of nanostructured polymers on the improvement of electrical response-based relative humidity sensors

(2016) I. Fratoddi et al.   SENSORS AND ACTUATORS B-CHEMICAL

Nanoparticle–Nanofibrous Membranes as Scaffolds for Flexible Sweat Sensors

(2016) Ning Kang et al.   ACS Sensors

Highly sensitive humidity sensors made from composites of HEC filled by carbon nanofillers

(2015) X. Ma et al.   MATERIALS TECHNOLOGY

On the morphology of cellulose nanofibrils obtained by TEMPO-mediated oxidation and mechanical treatment

(2015) José A.F. Gamelas et al.   MICRON

A gravure printed antenna on shape-stable transparent nanopaper

(2014) Hongli Zhu et al.   Nanoscale

Optical methods for the quantification of the fibrillation degree of bleached MFC materials

(2013) Gary Chinga-Carrasco   MICRON

The effect of residual fibres on the micro-topography of cellulose nanopaper

(2013) Gary Chinga-Carrasco et al.   MICRON

Influence of TEMPO-oxidized cellulose nanofibril length on film properties

(2012) Hayaka Fukuzumi et al.   CARBOHYDRATE POLYMERS

Inkjet-printed silver nanoparticles on nano-engineered cellulose films for electrically conducting structures and organic transistors: concept and challenges

(2012) Gary Chinga-Carrasco et al.   JOURNAL OF NANOPARTICLE RESEARCH

Highly stable and sensitive humidity sensors based on quartz crystal microbalance coated with bacterial cellulose membrane

(2011) Weili Hu et al.   SENSORS AND ACTUATORS B-CHEMICAL

Cellulose fibres, nanofibrils and microfibrils: The morphological sequence of MFC components from a plant physiology and fibre technology point of view

(2011) Gary Chinga-Carrasco   Nanoscale Research Letters

Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications

(2010) Galina Rodionova et al.   CELLULOSE

Oxygen and oil barrier properties of microfibrillated cellulose films and coatings

(2010) Christian Aulin et al.   CELLULOSE

Conductance study of poly(ethylene oxide)- and poly(propylene oxide)-based polyelectrolytes

(2010) Mohammad Saleem Khan et al.   IONICS

Highly transparent films from carboxymethylated microfibrillated cellulose: The effect of multiple homogenization steps on key properties

(2010) I. Siró et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Transparent and High Gas Barrier Films of Cellulose Nanofibers Prepared by TEMPO-Mediated Oxidation

(2008) Hayaka Fukuzumi et al.   BIOMACROMOLECULES

Strength and barrier properties of MFC films

(2008) Kristin Syverud et al.   CELLULOSE