Strain Hardening of Phases in High-Alloy CrMnNi Steel as a Consequence of Pre-Deformation Studied by Nanoindentation

Austenitic Nickel- and Manganese-Free Fe-15Cr-1Mo-0.4N-0.3C Steel: Tensile Behavior and Deformation-Induced Processes between 298 K and 503 K (25 °C and 230 °C)

(2017) Javad Mola et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Interplay of microstructure defects in austenitic steel with medium stacking fault energy

(2016) C. Ullrich et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Influence of Plastic Deformation on the Corrosion Behavior of a Cast High-Alloy CrMnNi TRIP Steel

(2016) Marcel Mandel et al.   STEEL RESEARCH INTERNATIONAL

Combination of Different In Situ Characterization Techniques and Scanning Electron Microscopy Investigations for a Comprehensive Description of the Tensile Deformation Behavior of a CrMnNi TRIP/TWIP Steel

(2015) Anja Weidner et al.   JOM

Magnitude of shear of deformation-induced α′-martensite in high-alloy metastable steel

(2015) Anja Weidner et al.   MATERIALS LETTERS

Prediction of the local deformation mechanisms in metastable austenitic steels from the local concentration of the main alloying elements

(2015) S. Martin et al.   MATERIALS LETTERS

Nano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels

(2015) Hyoung Seok Park et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dependence of nanoindentation hardness with crystallographic orientation of austenite grains in metastable stainless steels

(2015) J.J. Roa et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Investigation of Phase Transformations in High-Alloy Austenitic TRIP Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-ray Diffraction and Scanning Electron Microscopy

(2015) Stephanie Ackermann et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Variant selection during mechanically induced martensitic transformation of metastable austenite by nanoindentation

(2015) Yanghoo Kim et al.   SCRIPTA MATERIALIA

Deformation Bands in High-Alloy Austenitic 16Cr6Mn6Ni TRIP Steel: Phase Transformation and Its Consequences on Strain Hardening at Room Temperature

(2015) Stefan Martin et al.   STEEL RESEARCH INTERNATIONAL

Strain-induced ε-martensite transformation during nanoindentation of high-nitrogen steel

(2014) Tae-Hong Ahn et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain size dependent strain rate sensitivity in nanocrystalline body-centered cubic metal thin films

(2014) Q. Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Revealing the Intrinsic Nanohardness of Lath Martensite in Low Carbon Steel

(2014) B. B. He et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Nanoindentation measurements on deformation-induced α’-martensite in a metastable austenitic high-alloy CrMnNi steel

(2014) Anja Weidner et al.   PHILOSOPHICAL MAGAZINE LETTERS

Stacking fault energy in austenitic steels determined by usingin situX-ray diffraction during bending

(2014) D. Rafaja et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels

(2013) S. Zhang et al.   ACTA MATERIALIA

Ultrafine grained high-alloyed austenitic TRIP steel

(2013) A. Weidner et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel

(2013) B.B. He et al.   SCRIPTA MATERIALIA

Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomography

(2012) C. Tromas et al.   ACTA MATERIALIA

Evaluation of strain rate sensitivity by constant load nanoindentation

(2012) Daniel Peykov et al.   JOURNAL OF MATERIALS SCIENCE

Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations

(2011) M.A. Lodes et al.   ACTA MATERIALIA

Correlation between dislocation density and nanomechanical response during nanoindentation

(2011) Afrooz Barnoush   ACTA MATERIALIA

Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip

(2011) Claudio Zambaldi et al.   JOURNAL OF MATERIALS RESEARCH

Nanomechanical insights into the deformation behavior of austenitic alloys with different stacking fault energies and austenitic stability

(2011) R.D.K. Misra et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Size Effects and Stochastic Behavior of Nanoindentation Pop In

(2011) J. R. Morris et al.   PHYSICAL REVIEW LETTERS

Strain Rate Dependent Flow Stress and Energy Absorption Behaviour of Cast CrMnNi TRIP/TWIP Steels

(2011) L. Krüger et al.   STEEL RESEARCH INTERNATIONAL

Influence of Manganese and Nickel on the α´ Martensite Transformation Temperatures of High Alloyed Cr-Mn-Ni Steels

(2011) Andreas Jahn et al.   STEEL RESEARCH INTERNATIONAL

Cyclic Deformation Behaviour of Three Austenitic Cast CrMnNi TRIP/TWIP Steels with Various Ni Content

(2011) A. Glage et al.   STEEL RESEARCH INTERNATIONAL

A physically based model for indenter tip shape calibration for nanoindentation

(2010) Lucas A. Berla et al.   JOURNAL OF MATERIALS RESEARCH

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Probing deformation processes in near-defect free volume in high strength–high ductility nanograined/ultrafine-grained (NG/UFG) metastable austenitic stainless steels

(2010) R.D.K. Misra et al.   SCRIPTA MATERIALIA

Correlation between dislocation density and pop-in phenomena in aluminum studied by nanoindentation and electron channeling contrast imaging

(2010) Afrooz Barnoush et al.   SCRIPTA MATERIALIA

Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation

(2010) T.-H. Ahn et al.   SCRIPTA MATERIALIA

Temperature Depending Influence of the Martensite Formation on the Mechanical Properties of High-Alloyed Cr-Mn-Ni As-Cast Steels

(2010) Andreas Jahn et al.   STEEL RESEARCH INTERNATIONAL

The effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations

(2009) T. B. Britton et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Indentation size effect in spherical and pyramidal indentations

(2008) Karsten Durst et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

A different type of indentation size effect

(2008) S. Shim et al.   SCRIPTA MATERIALIA