Effect of Multidirectional Forging on the Grain Structure and Mechanical Properties of the Al–Mg–Mn Alloy

Effect of temperature of isothermal multidirectional forging on microstructure development in the Al-Mg alloy with nano-size aluminides of Sc and Zr

(2018) O. Sitdikov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Impact of chromium on the microchemistry evolution during solidification and homogenization of the Al-Mg alloy AA 5052

(2018) Olaf Engler et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Investigation of pre-existing particles in Al 5083 alloys

(2018) Gaosong Yi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Al-Mg-Fe-Ni based alloy for high strain rate superplastic forming

(2018) A.A. Kishchik et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the Effect of Natural Aging Prior to Low Temperature ECAP of a High-Strength Aluminum Alloy

(2018) et al.   Metals

Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy

(2017) Saeed Khani Moghanaki et al.   MATERIALS CHARACTERIZATION

Study on the effect of post-annealing on the microstructural evolutions and mechanical properties of rolled CGPed Aluminum-Manganese-Silicon alloy

(2017) Mohammad Reza Jandaghi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation of Fine-Grained Structure and Superplasticity in Commercial Aluminum Alloy 1565ch

(2017) M. S. Kishchik et al.   METAL SCIENCE AND HEAT TREATMENT

Influence of Al3Ni crystallisation origin particles on hot deformation behaviour of aluminium based alloys

(2017) A. Yu. Churyumov et al.   PHILOSOPHICAL MAGAZINE

Effect of the Size of Al3(Sc,Zr) Precipitates on the Structure of Multi-Directionally Isothermally Forged Al-Mg-Sc-Zr Alloy

(2017) O. Sh. Sitdikov et al.   PHYSICS OF METALS AND METALLOGRAPHY

Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed 2024 aluminum alloy

(2017) Saeed KHANI MOGHANAKI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Peculiar Spatiotemporal Behavior of Unstable Plastic Flow in an AlMgMnScZr Alloy with Coarse and Ultrafine Grains

(2017) Daria Zhemchuzhnikova et al.   Metals

Nano- and Micro-Mechanical Properties of Ultrafine-Grained Materials Processed by Severe Plastic Deformation Techniques 

(2016) Megumi Kawasaki et al.   ADVANCED ENGINEERING MATERIALS

Control of second-phase particles in the Al-Mg-Mn alloy AA 5083

(2016) Olaf Engler et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment

(2016) A.D. Kotov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging

(2016) Bingfeng Wang et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Multi-axial forging of Fe3Al-base intermetallic alloy and its mechanical properties

(2016) Radosław Łyszkowski et al.   JOURNAL OF MATERIALS SCIENCE

Microstructure and mechanical properties of AZ31 magnesium alloy processed by multi-directional forging at different temperatures

(2016) Hao Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates

(2016) A.V. Mikhaylovskaya et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of die profile on grain refinement in Al–Mg alloy processed by repetitive corrugation and straightening

(2016) N. Thangapandian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy

(2016) R.C. Buckingham et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the effect of non-isothermal annealing and multi-directional forging on the microstructural evolutions and correlated mechanical and electrical characteristics of hot-deformed Al-Mg alloy

(2016) Mohammad Reza Jandaghi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Al-based magnetic composites produced by accumulative roll bonding (ARB)

(2016) F. Daneshvar et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Multi Directional Forging of 2024 Al Alloy After Different Heat Treatments: Microstructural and Mechanical Behavior

(2016) Saeed Asadi et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Al-based magnetic composites produced by accumulative roll bonding (ARB)

(2016) F. Daneshvar et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE = 5.4 wt.% Ce, 3.1 wt.% La) alloy processed by severe plastic deformation

(2016) M.Yu. Murashkin et al.   MATERIALS & DESIGN

Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate

(2015) Juqiang Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhanced Mechanical Properties and Electrical Conductivity in Ultrafine-Grained Al 6101 Alloy Processed via ECAP-Conform

(2015) Maxim Murashkin et al.   Metals

Fatigue Behavior of an Ultrafine-Grained Al-Mg-Si Alloy Processed by High-Pressure Torsion

(2015) Maxim Murashkin et al.   Metals

Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys

(2014) Shiteng Zhao et al.   ACTA MATERIALIA

The effect of second-phase particles on grain refinement during equal-channel angular pressing in an Al–Cu–Mg–Ag alloy

(2014) M. Gazizov et al.   JOURNAL OF MATERIALS SCIENCE

Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperature

(2014) Qing-feng ZHU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement

(2013) Terence G. Langdon   ACTA MATERIALIA

Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging

(2013) J. Kavosi et al.   COMPUTATIONAL MATERIALS SCIENCE

Impact of homogenization on particles in the Al–Mg–Mn alloy AA 5454 – Experiment and simulation

(2013) Olaf Engler et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The influence of chromium on the structure and superplasticity of Al–Mg–Mn alloys

(2013) V.K. Portnoy et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature

(2013) P. Nageswara Rao et al.   MATERIALS & DESIGN

Using an Al–Cu binary alloy to compare processing by multi-axial compression and high-pressure torsion

(2013) Xiaochang Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving superplasticity in ultrafine-grained metals

(2013) Terence G. Langdon   MECHANICS OF MATERIALS

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

(2013) Taku Sakai et al.   PROGRESS IN MATERIALS SCIENCE

Effect of second phase particles on grain refinement during equal-channel angular pressing of an Al–Mg–Mn alloy

(2011) I. Nikulin et al.   ACTA MATERIALIA

Developing superplasticity and a deformation mechanism map for the Zn–Al eutectoid alloy processed by high-pressure torsion

(2011) Megumi Kawasaki et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Multi-directional forging of AZ61Mg alloy under decreasing temperature conditions and improvement of its mechanical properties

(2011) H. Miura et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of grain refinement on the microstructure and tensile properties of thin 319 Al castings

(2010) M.J. Shabani et al.   MATERIALS & DESIGN

Nano-grain evolution in austenitic stainless steel during multi-directional forging

(2010) Y. Nakao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation

(2009) O. Sitdikov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties

(2009) A.K. Padap et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion

(2008) Cheng Xu et al.   ACTA MATERIALIA

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Grain refinement and strain hardening in IF steel during multi-axis compression: Experiment and modelling

(2007) H. Petryk et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Mechanical properties and microstructure of Al–Mg–Mn–Zr alloy processed by equal channel angular pressing at elevated temperature

(2007) Jiang Li Ning et al.   MATERIALS CHARACTERIZATION