Direct writing of electronics based on alloy and metal (DREAM) ink: A newly emerging area and its impact on energy, environment and health sciences

Gallium-based thermal interface material with high compliance and wettability

(2012) Yunxia Gao et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Printable tiny thermocouple by liquid metal gallium and its matching metal

(2012) Haiyan Li et al.   APPLIED PHYSICS LETTERS

Resistivity transition mechanism of silver salts in the next generation conductive ink for a roll-to-roll printed film with a silver network

(2012) Dong-Youn Shin et al.   JOURNAL OF MATERIALS CHEMISTRY

Direct Writing of Flexible Electronics through Room Temperature Liquid Metal Ink

(2012) Yunxia Gao et al.   PLoS One

Phase change effect of low melting point metal for an automatic cooling of USB flash memory

(2012) Haoshan Ge et al.   Frontiers in Energy

Pen-on-Paper Flexible Electronics

(2011) Analisa Russo et al.   ADVANCED MATERIALS

Wearable electrochemical sensors for in situ analysis in marine environments

(2011) Kerstin Malzahn et al.   ANALYST

Impact of ink formulation on carbon nanotube network organization within inkjet printed conductive films

(2011) Aurore Denneulin et al.   CARBON

Preparation and optical properties of AgGaS2 nanofilms

(2011) Jianjun Zhang et al.   CRYSTAL RESEARCH AND TECHNOLOGY

Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing

(2011) Yoonhyun Kim et al.   CURRENT APPLIED PHYSICS

Fabrication, charge carrier transport, and application of printable nanocomposites based on indium tin oxide nanoparticles and conducting polymer 3,4-ethylenedioxythiophene/polystyrene sulfonic acid

(2011) Ilja Maksimenko et al.   JOURNAL OF APPLIED PHYSICS

Self-Driven Electronic Cooling Based on Thermosyphon Effect of Room Temperature Liquid Metal

(2011) Peipei Li et al.   JOURNAL OF ELECTRONIC PACKAGING

Liquid metal based thermoelectric generation system for waste heat recovery

(2011) Dan Dai et al.   RENEWABLE ENERGY

Revolutionizing heat transport enhancement with liquid metals: Proposal of a new industry of water-free heat exchangers

(2011) Haiyan Li et al.   Frontiers in Energy

Triggering the Sintering of Silver Nanoparticles at Room Temperature

(2010) Shlomo Magdassi et al.   ACS Nano

Thick-film textile-based amperometric sensors and biosensors

(2010) Yang-Li Yang et al.   ANALYST

A simple way of preparing high-concentration and high-purity nano copper colloid for conductive ink in inkjet printing technology

(2010) Xiao-Feng Tang et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Characteristics of inkjet-printed nano indium tin oxide particles for transparent conducting electrodes

(2010) Jin-A. Jeong et al.   CURRENT APPLIED PHYSICS

Hybrid liquid metal–water cooling system for heat dissipation of high power density microdevices

(2010) Yueguang Deng et al.   HEAT AND MASS TRANSFER

A liquid metal cooling system for the thermal management of high power LEDs

(2010) Yueguang Deng et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Wettability and strength of In–Bi–Sn lead-free solder alloy on copper substrate

(2010) Ervina Efzan Mhd Noor et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Design of Practical Liquid Metal Cooling Device for Heat Dissipation of High Performance CPUs

(2010) Yueguang Deng et al.   JOURNAL OF ELECTRONIC PACKAGING

Electrical conductivity and viscosity of liquid Sn–Sb–Cu alloys

(2010) Yu. Plevachuk et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS

Investigations of wetting properties of Ni–V and Ni–Co alloys by Sn, Sn–Pb, Sn–Cu, and Sn–Ag–Cu solders

(2010) Chun-Chong Fu et al.   Journal of the Taiwan Institute of Chemical Engineers

Impurity and alloying effects on interfacial reaction layers in Pb-free soldering

(2010) T. Laurila et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn–9Zn binary eutectic solder alloy

(2010) Mansur Ahmed et al.   MICROELECTRONICS RELIABILITY

Conductance Enhancement Mechanisms of Printable Nanoparticulate Indium Tin Oxide (ITO) Layers for Application in Organic Electronic Devices

(2009) Michael Gross et al.   ADVANCED ENGINEERING MATERIALS

Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates

(2009) Jolke Perelaer et al.   ADVANCED MATERIALS

Corrosion development between liquid gallium and four typical metal substrates used in chip cooling device

(2009) Yue-Guang Deng et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

A low-cure-temperature copper nano ink for highly conductive printed electrodes

(2009) Byoungyoon Lee et al.   CURRENT APPLIED PHYSICS

Influence of indium addition on structure, mechanical, thermal and electrical properties of tin–antimony based metallic alloys quenched from melt

(2009) Rizk Mostafa Shalaby   JOURNAL OF ALLOYS AND COMPOUNDS

Environmental evaluation of new technology: printed electronics case study

(2009) Esa Kunnari et al.   JOURNAL OF CLEANER PRODUCTION

Viscosity and Surface Tension of Liquid Sn-Cu Lead-Free Solders

(2009) N. Zhao et al.   JOURNAL OF ELECTRONIC MATERIALS

Effects of Ga–Ag, Ga–Al and Al–Ag additions on the wetting characteristics of Sn–9Zn–X–Y lead-free solders

(2009) Hui Wang et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS

Printable Thin Film Supercapacitors Using Single-Walled Carbon Nanotubes

(2009) Martti Kaempgen et al.   NANO LETTERS

A high-mobility electron-transporting polymer for printed transistors

(2009) He Yan et al.   NATURE

Stretchable active-matrix organic light-emitting diode display using printable elastic conductors

(2009) Tsuyoshi Sekitani et al.   NATURE MATERIALS

Printable electronics: flexibility for the future

(2009) Mark A. M. Leenen et al.   PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE

Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes

(2009) B. Y. Ahn et al.   SCIENCE

Creep properties of Sn–Sb based lead-free solder alloys

(2008) A.A. El-Daly et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Inkjet-printed silver tracks: low temperature curing and thermal stability investigation

(2008) By Jolke Perelaer et al.   JOURNAL OF MATERIALS CHEMISTRY

Synthesis of CuInS2, CuInSe2, and Cu(InxGa1-x)Se2(CIGS) Nanocrystal “Inks” for Printable Photovoltaics

(2008) Matthew G. Panthani et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Ink-Jet Printing of Cu−Ag-Based Highly Conductive Tracks on a Transparent Substrate

(2008) Kyoohee Woo et al.   LANGMUIR

Planar GaAs Nanowires on GaAs (100) Substrates: Self-Aligned, Nearly Twin-Defect Free, and Transfer-Printable

(2008) Seth A. Fortuna et al.   NANO LETTERS

A nanoparticulate indium tin oxide field-effect transistor with solid electrolyte gating

(2008) S Dasgupta et al.   NANOTECHNOLOGY

Electrical sintering of nanoparticle structures

(2008) Mark L Allen et al.   NANOTECHNOLOGY

Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic

(2008) Jeong Ho Cho et al.   NATURE MATERIALS

Electromigration of Pb-free solder under a low level of current density

(2007) J.S. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Properties of solders with low melting point

(2007) Janka Chriašteľová et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder

(2007) Yaowu Shi et al.   JOURNAL OF ALLOYS AND COMPOUNDS