R2R-printed inverted OPV modules – towards arbitrary patterned designs

Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes

(2015) Fei Guo et al.   Energy & Environmental Science

“All That Glisters Is Not Gold”: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells

(2015) Riccardo Po et al.   MACROMOLECULES

High efficiency, fully inkjet printed organic solar cells with freedom of design

(2015) T. M. Eggenhuisen et al.   Journal of Materials Chemistry A

Gravure-Printed ZnO in Fully Roll-to-Roll Printed Inverted Organic Solar Cells: Optimization of Adhesion and Performance

(2015) Marja Vilkman et al.   Energy Technology

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

(2014) Thomas R. Andersen et al.   Energy & Environmental Science

Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer

(2014) Pälvi Apilo et al.   PROGRESS IN PHOTOVOLTAICS

ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents

(2014) Deepak Kaduwal et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells

(2014) Gisele A. dos Reis Benatto et al.   Advanced Energy Materials

25th Anniversary Article: Rise to Power - OPV-Based Solar Parks

(2013) Frederik C. Krebs et al.   ADVANCED MATERIALS

Effect of synthetic accessibility on the commercial viability of organic photovoltaics

(2013) Timothy P. Osedach et al.   Energy & Environmental Science

Universal statistics of parasitic shunt formation in solar cells, and its implications for cell to module efficiency gap

(2013) Sourabh Dongaonkar et al.   Energy & Environmental Science

From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective

(2013) Riccardo Po et al.   Energy & Environmental Science

Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices

(2013) H J van de Wiel et al.   NANOTECHNOLOGY

Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics

(2013) Christos Koidis et al.   ORGANIC ELECTRONICS

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

(2013) Dechan Angmo et al.   ORGANIC ELECTRONICS

The state of organic solar cells—A meta analysis

(2013) Mikkel Jørgensen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia

(2013) Frederik C. Krebs et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics

(2013) C. Koidis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers

(2013) Thomas R. Andersen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A polymer tandem solar cell with 10.6% power conversion efficiency

(2013) Jingbi You et al.   Nature Communications

Inkjet Printing of Back Electrodes for Inverted Polymer Solar Cells

(2013) Dechan Angmo et al.   Advanced Energy Materials

Scaling Up ITO-Free Solar Cells

(2013) Yulia Galagan et al.   Advanced Energy Materials

The case for organic photovoltaics

(2013) Seth B. Darling et al.   RSC Advances

Mild wetting poor solvent induced hydrogen bonding interactions for improved performance in bulk heterojunction solar cells

(2013) Sai-Anand Gopalan et al.   Journal of Materials Chemistry A

It is all in the Pattern-High-Efficiency Power Extraction from Polymer Solar Cells through High-Voltage Serial Connection

(2013) Peter Sommer-Larsen et al.   Energy Technology

Fast Inline Roll-to-Roll Printing for Indium-Tin-Oxide-Free Polymer Solar Cells Using Automatic Registration

(2013) Markus Hösel et al.   Energy Technology

Freely available OPV-The fast way to progress

(2013) Frederik C. Krebs et al.   Energy Technology

Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells

(2012) Fang Jeng Lim et al.   JOURNAL OF MATERIALS CHEMISTRY

Roll-to-Roll fabrication of large area functional organic materials

(2012) Roar R. Søndergaard et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Femtoliter-Scale Patterning by High-Speed, Highly Scaled Inverse Gravure Printing

(2012) Rungrot Kitsomboonloha et al.   LANGMUIR

Roll-to-roll fabrication of polymer solar cells

(2012) Roar Søndergaard et al.   Materials Today

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes

(2012) Jong-Su Yu et al.   Nanoscale

Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells

(2012) Yulia Galagan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area

(2012) Riccardo Po et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Aerosol jet printed grid for ITO-free inverted organic solar cells

(2012) Pälvi Kopola et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance

(2012) Monika M. Voigt et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Organic photovoltaic modules fabricated by an industrial gravure printing proofer

(2012) Junliang Yang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures

(2011) David S. Hecht et al.   ADVANCED MATERIALS

Life-cycle analysis of product integrated polymer solar cells

(2011) Nieves Espinosa et al.   Energy & Environmental Science

Miscibility, Crystallinity, and Phase Development in P3HT/PCBM Solar Cells: Toward an Enlightened Understanding of Device Morphology and Stability

(2011) Brian A. Collins et al.   Journal of Physical Chemistry Letters

Hierarchical Nanomorphologies Promote Exciton Dissociation in Polymer/Fullerene Bulk Heterojunction Solar Cells

(2011) Wei Chen et al.   NANO LETTERS

Gravure printed flexible organic photovoltaic modules

(2011) Pälvi Kopola et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing

(2011) Nieves Espinosa et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Printed Paper Photovoltaic Cells

(2011) Arved Hübler et al.   Advanced Energy Materials

Technology development for roll-to-roll production of organic photovoltaics

(2010) Yulia Galagan et al.   CHEMICAL ENGINEERING AND PROCESSING

Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing

(2010) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

Upscaling of polymer solar cell fabrication using full roll-to-roll processing

(2010) Frederik C. Krebs et al.   Nanoscale

High efficient plastic solar cells fabricated with a high-throughput gravure printing method

(2010) P. Kopola et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates

(2010) Monika M. Voigt et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions

(2010) Nieves Espinosa et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies

(2009) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps

(2009) Frederik C. Krebs   ORGANIC ELECTRONICS

Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing

(2009) Jau M. Ding et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells

(2009) Lars Blankenburg et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells

(2009) Woon-Hyuk Baek et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing

(2009) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS