Polystyrene Foam with High Cell Density and Small Cell Size by Compression-Injection Molding and Core Back Foaming Technique: Evolution of Cells in Cavity
Published 2018 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Polystyrene Foam with High Cell Density and Small Cell Size by Compression-Injection Molding and Core Back Foaming Technique: Evolution of Cells in Cavity
Authors
Keywords
-
Journal
MACROMOLECULAR MATERIALS AND ENGINEERING
Volume 303, Issue 9, Pages 1800110
Publisher
Wiley
Online
2018-07-23
DOI
10.1002/mame.201800110
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Durably Antibacterial and Bacterially Antiadhesive Cotton Fabrics Coated by Cationic Fluorinated Polymers
- (2018) Jing Lin et al. ACS Applied Materials & Interfaces
- A three-dimensional thermal model for viscoelastic polymer melt packing process in injection molding
- (2018) Xin Zhuang et al. APPLIED THERMAL ENGINEERING
- Carbon Nanomaterials in Direct Liquid Fuel Cells
- (2018) Huayun Du et al. CHEMICAL RECORD
- Microcellular PP/GF composites: Morphological, mechanical and fracture characterization
- (2018) J. Gómez-Monterde et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers
- (2018) Jinchuan Zhao et al. EUROPEAN POLYMER JOURNAL
- Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: Magnetic field assisted alignment and cryogenic temperature mechanical properties
- (2018) Yuxin He et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Crosslinked norbornene copolymer anion exchange membrane for fuel cells
- (2018) Chao Wang et al. JOURNAL OF MEMBRANE SCIENCE
- Overview of the Experimental Trends in Water-Assisted Injection Molding
- (2018) Xianhu Liu et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Controllable Cross-Linking Anion Exchange Membranes with Excellent Mechanical and Thermal Properties
- (2018) Chao Wang et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Light triggered interfacial damage self-healing of poly(p-phenylene benzobisoxazole) fiber composites
- (2018) Zhen Hu et al. NANOTECHNOLOGY
- Hydroxide ions transportation in polynorbornene anion exchange membrane
- (2018) Chao Wang et al. POLYMER
- An overview of metamaterials and their achievements in wireless power transfer
- (2018) Kai Sun et al. Journal of Materials Chemistry C
- Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology
- (2018) Yongqiang Guo et al. Journal of Materials Chemistry C
- Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing
- (2018) Yahong Li et al. Journal of Materials Chemistry C
- Non-covalently functionalized graphene strengthened poly(vinyl alcohol)
- (2018) Xiaodong Wang et al. MATERIALS & DESIGN
- Effect of the melt compressibility and the pressure drop rate on the cell-nucleation behavior in foam injection molding with mold opening
- (2017) Vahid Shaayegan et al. EUROPEAN POLYMER JOURNAL
- Investigation on bubble morphological evolution and plastic part surface quality of microcellular injection molding process based on a multiphase-solid coupled heat transfer model
- (2017) Lei Zhang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Overview of polymer nanocomposites: Computer simulation understanding of physical properties
- (2017) Jinbo Zhao et al. POLYMER
- Porous lignin based poly (acrylic acid)/organo-montmorillonite nanocomposites: Swelling behaviors and rapid removal of Pb (II) ions
- (2017) Yanli Ma et al. POLYMER
- Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity
- (2017) Kai Sun et al. POLYMER
- Flame-retardant rigid polyurethane foam with a phosphorus-nitrogen single intumescent flame retardant
- (2017) Chao Wang et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Surface strengthening of injection molded parts by applying a thermal insulation film
- (2017) Hwa Jin Oh et al. RSC Advances
- Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes
- (2017) Chao Hu et al. Journal of Materials Chemistry C
- Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing
- (2017) Hu Liu et al. Journal of Materials Chemistry C
- A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance
- (2017) Junji Hou et al. MATERIALS & DESIGN
- High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites
- (2017) Jinchuan Zhao et al. MATERIALS & DESIGN
- Carbon Nanotubes-Adsorbed Electrospun PA66 Nanofiber Bundles with Improved Conductivity and Robust Flexibility
- (2016) Xiaoyang Guan et al. ACS Applied Materials & Interfaces
- Identification of cell-nucleation mechanism in foam injection molding with gas-counter pressure via mold visualization
- (2016) Vahid Shaayegan et al. AICHE JOURNAL
- Effect of foam processing parameters on bubble nucleation and growth dynamics in high-pressure foam injection molding
- (2016) Vahid Shaayegan et al. CHEMICAL ENGINEERING SCIENCE
- Experiment and simulation of foaming injection molding of polypropylene/nano-calcium carbonate composites by supercritical carbon dioxide
- (2016) Zhenhao Xi et al. CHINESE JOURNAL OF CHEMICAL ENGINEERING
- Study of the bubble nucleation and growth mechanisms in high-pressure foam injection molding through in-situ visualization
- (2016) Vahid Shaayegan et al. EUROPEAN POLYMER JOURNAL
- A new insight into foaming mechanisms in injection molding via a novel visualization mold
- (2016) V. Shaayegan et al. Express Polymer Letters
- Estimation of the foaming temperature of mold-opening foam injection molding process
- (2016) Raymond KM Chu et al. JOURNAL OF CELLULAR PLASTICS
- Experimental and simulation study of the physical foaming process using high-pressure CO 2
- (2016) Ying Sun et al. JOURNAL OF SUPERCRITICAL FLUIDS
- Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers
- (2016) Hu Liu et al. Nanoscale
- Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications
- (2016) Hu Liu et al. Journal of Materials Chemistry C
- Organic vapor sensing behaviors of conductive thermoplastic polyurethane–graphene nanocomposites
- (2016) Hu Liu et al. Journal of Materials Chemistry C
- Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine
- (2016) B.R. Bharath Kumar et al. MATERIALS & DESIGN
- Heat transfer in microcellular polystyrene/multi-walled carbon nanotube nanocomposite foams
- (2015) Pengjian Gong et al. CARBON
- Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors
- (2015) A. Ameli et al. CHEMICAL ENGINEERING JOURNAL
- Pressure drop threshold in the foaming of low-density polyethylene, polystyrene, and polypropylene using CO2 and N2 as foaming agents
- (2015) Ying Sun et al. JOURNAL OF SUPERCRITICAL FLUIDS
- General aspects of foam injection molding using local precision mold opening technology
- (2015) Hans-Peter Heim et al. POLYMER
- A novel method of producing lightweight microcellular injection molded parts with improved ductility and toughness
- (2015) Xiaofei Sun et al. POLYMER
- Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference Shielding
- (2014) Aboutaleb Ameli et al. ACS Applied Materials & Interfaces
- Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold
- (2014) A. Ameli et al. CARBON
- Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding
- (2014) Gui-long Wang et al. POLYMER ENGINEERING AND SCIENCE
- Injection Compression Molding of Replica Molds for Nanoimprint Lithography
- (2014) Keisuke Nagato Polymers
- Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams
- (2013) A. Ameli et al. CARBON
- Microcellular injection-compression molding (micm): A novel technology for effectively improving cellular structure of polystyrene foams
- (2013) Han-Xiong Huang et al. POLYMER ENGINEERING AND SCIENCE
- Birefringence in injection-compression molding of amorphous polymers: Simulation and experiment
- (2013) Nam Hyung Kim et al. POLYMER ENGINEERING AND SCIENCE
- Through-plane electrical conductivity of injection-molded polypropylene/carbon-fiber composite foams
- (2012) A. Ameli et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Morphology, mechanical, thermal and rheological behavior of microcellular injection molded TPO-clay nanocomposites prepared by kneader
- (2011) Shyh-shin Hwang et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Visual observation and numerical studies of polymer foaming behavior of polypropylene/carbon dioxide system in a core-back injection molding process
- (2011) Takeshi Ishikawa et al. POLYMER ENGINEERING AND SCIENCE
- Visual observation and numerical studies of N2 vs. CO2 foaming behavior in core-back foam injection molding
- (2011) Takeshi Ishikawa et al. POLYMER ENGINEERING AND SCIENCE
- Change in the critical nucleation radius and its impact on cell stability during polymeric foaming processes
- (2009) Siu N. Leung et al. CHEMICAL ENGINEERING SCIENCE
- The effect of injection molding conditions on the morphology of polymer structural foams
- (2009) M. Reza Barzegari et al. POLYMER ENGINEERING AND SCIENCE
- Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding
- (2008) John W. S. Lee et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams
- (2008) Steven Wong et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Microcellular injection-molding of polylactide with chain-extender
- (2008) Srikanth Pilla et al. Materials Science & Engineering C-Materials for Biological Applications
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation