A Review of X-Ray Flow Visualization With Applications to Multiphase Flows

Simulation of particle migration in free-surface flows

(2010) Kyung Hoon Min et al.   AICHE JOURNAL

3D-ECT Velocimetry for Flow Structure Quantification of Gas-Liquid-Solid Fluidized Beds

(2010) W Warsito et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Analysis and Interpretation of Multiple Radioactive Particle Tracking Data on Laboratory Scale Air/Polyethylene Fluidized Beds

(2010) Loni Schober et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Possibilities and Limits of Application of Electrical Resistance Tomography in Hydrodynamics of Bubble Columns

(2010) Dominique Toye et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Phase Distribution in a High Pressure Slurry Bubble Column via a Single Source Computed Tomography

(2010) Novica Rados et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Observation of 3-D Structure of Bubbles in a Fluidized Catalyst Bed

(2010) Takami Kai et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Positron Emission Tomography Applied to Fluidization Engineering

(2010) Chutima Dechsiri et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Contribution of synchrotron X-ray holotomography to the understanding of liquid distribution in a medium during liquid aerosol filtration

(2010) A. Charvet et al.   CHEMICAL ENGINEERING SCIENCE

Dual-plane ultrafast limited-angle electron beam x-ray tomography

(2010) M. Bieberle et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Double X-ray Tomography of a Bubbling Fluidized Bed

(2010) R. F. Mudde   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Combining X-ray microtomography with computer simulation for analysis of granular and porous materials

(2010) Roberto Moreno-Atanasio et al.   Particuology

Flow Field Visualization in Structured Packing Using Real Time X-ray Radiography

(2009) Scott A. Owens et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

CFD Modeling and X-Ray Imaging of Biomass in a Fluidized Bed

(2009) Mirka Deza et al.   JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME

Local time-averaged gas holdup in a fluidized bed with side air injection using X-ray computed tomography

(2009) Nathan P. Franka et al.   POWDER TECHNOLOGY

Time-resolved X-ray tomography of a fluidized bed

(2009) R.F. Mudde   POWDER TECHNOLOGY

X-ray computed tomography of a gas-sparged stirred-tank reactor

(2008) Jason J. Ford et al.   CHEMICAL ENGINEERING SCIENCE

Electrical Capacitance Tomography − A Perspective

(2008) Q. Marashdeh et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Measurement of Axisymmetric Two-Phase Flows by an Improved X-ray-Computed Tomography Technique

(2008) Changning Wu et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Effect of Water Solubility on Carbon Dioxide Foam Flow in Porous Media: An X-ray Computed Tomography Study

(2008) Dong-Xing Du et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Measuring the Gas-Solids Distribution in Fluidized Beds -- A Review

(2008) J. Ruud van Ommen et al.   International Journal of Chemical Reactor Engineering

Nozzle Geometry and Injection Duration Effects on Diesel Sprays Measured by X-Ray Radiography

(2008) A. L. Kastengren et al.   JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME

Experimental techniques for multiphase flows

(2008) Robert L. Powell   PHYSICS OF FLUIDS

Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization

(2008) Keisuke Uchida et al.   POWDER TECHNOLOGY

Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography

(2007) Stephan Boden et al.   CHEMICAL ENGINEERING JOURNAL

An X-ray system for visualizing fluid flows

(2007) Theodore J. Heindel et al.   FLOW MEASUREMENT AND INSTRUMENTATION

Novel experimental measuring techniques required to provide data for CFD validation

(2007) H.-M. Prasser   NUCLEAR ENGINEERING AND DESIGN

Magnetic Resonance Imaging of fluidized beds

(2007) C.R. Müller et al.   POWDER TECHNOLOGY