Article
Energy & Fuels
Irum Shaheen, Khuram Shahzad Ahmad, Camila Zequine, Ram K. Gupta, Andrew G. Thomas, Mohammad Azad Malik
Summary: In this study, MoO3/PdO nanomaterial was synthesized using sol gel synthesis method with foliar fuel of E. cognata. The material exhibited low internal resistance and moderate supercapacitor potential with efficient diffusion of electrons and ions, as indicated by electrochemical characterizations.
JOURNAL OF ENERGY STORAGE
(2021)
Article
Chemistry, Physical
Abdul Samad Mughal, Sidra Zawar, Muhammad Tamoor Ansar, Fatima Afzal, Ghulam Murtaza, Shahid Atiq, Shahid M. Ramay
Summary: This study synthesized MnCo2O4 nanostructures mediated via Ni substitution using the hydrothermal method, and the analysis of the obtained results demonstrated the exceptional electrochemical characteristics of the synthesized material, suggesting its potential as an electrode material.
Article
Chemistry, Physical
Karin Rettenmaier, Gregor A. Zickler, Guenther J. Redhammer, Thomas Berger
Summary: Mixed transition metal oxides are promising electrode materials for electrochemical energy storage and conversion. The synthesis of these materials with tailored composition, crystal structure, and morphology is crucial for optimizing their properties. This study reports on the room-temperature electrodeposition of a ternary oxide, ZnMnO3, using earth-abundant metals. The epitaxial growth of ZnMnO3 on ZnO nanowires results in a 2-dimensional morphology and shows promise for the direct growth of other mixed transition metal oxides on conductive substrates.
Review
Chemistry, Multidisciplinary
Peixing Shen, Beibei Zhang, Yuan Wang, Xuemei Liu, Cuiyan Yu, Tao Xu, Sajjad S. Mofarah, Yanlong Yu, Yanguo Liu, Hongyu Sun, Hamidreza Arandiyan
Summary: This review summarizes the recent research progress on Nb-based oxides, particularly Nb2O5, in energy storage systems such as LIBs and SIBs. It highlights their advantages including unique structural features, chemical stability, high operating voltage, and excellent rate capability dominated by pseudocapacitive nature. The review also discusses the crystal structures, lithium storage mechanisms, synthesis strategies, and future research challenges related to niobium-based oxides.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY
(2021)
Article
Energy & Fuels
Taghazal Zahra, Khuram Shahzad Ahmad
Summary: Efficient and stable OER catalyst [Mn2O3/PdO/ZnO] was prepared using a simple and cost-effective synthesis approach, showing high activity towards OER but average performance for HER. The material offers consistent OER overpotential value even after 2000 cycles, indicating its potential for renewable energy applications.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2022)
Article
Materials Science, Multidisciplinary
Pulok Das, Nirmalya Sankar Das, Kausik Sardar, Brahami Das, Ashadul Adalder, Kalyan Kumar Chattopadhyay
Summary: Various CuBO2 nanostructures with different shapes and properties were successfully synthesized using different methods. The samples were thoroughly characterized using various techniques, and it was found that the CuBO2 nanoparticles synthesized via sol-gel method showed the highest aspect ratio and exhibited pseudo capacitive nature. The electrochemical properties of the samples were correlated with their aspect ratio, surface area, and elemental variation. This study not only expands the applications of CBO, but also provides insight into its electrochemical behavior.
MATERIALS CHEMISTRY AND PHYSICS
(2023)
Review
Physics, Multidisciplinary
Renaud Leturcq, Rutuja Bhusari, Emanuele Barborini
Summary: Metal oxide nanostructures have attractive properties in gas sensing due to their large surface-over-volume ratio and the ability to use multiple materials with multi-functional properties. These nanostructures can be adapted to describe more complex structures and enhance the sensitivity and selectivity of devices. Activation of nanostructures by light exposure is a promising alternative to the standard high-temperature activation method, especially for low-power IoT applications.
ADVANCES IN PHYSICS-X
(2022)
Article
Materials Science, Multidisciplinary
Silviu Polosan, Paul Ganea, Andrei Nitescu
Summary: Phosphate tellurite glasses were successfully synthesized by melt quenching, with a composition of 40%ZnO+40%P2O5+20%TeO2. Compared to glasses synthesized with H3PO4, those containing P2O5 showed greater chemical stability. Magneto-optical measurements revealed a specific transition associated with tellurium colloids, while densities and electrical conductivity increased with melting temperature.
MATERIALS RESEARCH BULLETIN
(2021)
Review
Electrochemistry
D. Hernandez-Ramirez, L. H. Mendoza-Huizar, G. Y. Aguilar-Lira, G. A. Alvarez-Romero
Summary: This review discusses the development of non-enzymatic electrochemical studies based on nano-structures of non-noble metal oxides for uric acid detection over the past decade. The proposed electrochemical sensors show promising applications for determining uric acid in blood, urine, pharmaceuticals, water, and commercial shellfish. The results reported are very encouraging, with the electrodes modified with nano-structures of metal oxides showing great potential in electrochemically oxidizing uric acid.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2021)
Article
Nanoscience & Nanotechnology
Ganesh Kesavan, Moorthi Pichumani, Shen-Ming Chen
Summary: Iron vanadate nanostructures were synthesized via controlled hydrothermal method at different temperatures, showing temperature-dependent changes in morphology and properties. The sample prepared at 150 degrees Celsius exhibited a higher specific surface area. The electrochemical activity of the catalyst was significantly influenced by the hydrothermal temperature, leading to improved detection of FLT in human blood serum.
ACS APPLIED NANO MATERIALS
(2021)
Review
Chemistry, Physical
Mulin Yu, Peng-Fei Sui, Xian-Zhu Fu, Jing-Li Luo, Subiao Liu
Summary: Metal nanomaterials play an important role as high-performance electrocatalysts for the conversion of CO2 to value-added fuels. However, there is a limited understanding of the relationship between specific metal nanostructures and their properties in CO2RR.
ADVANCED ENERGY MATERIALS
(2023)
Article
Energy & Fuels
Linlin Li, Pengchao Ji, Chang Geng, Yu Li, Leichao Meng, Bo Zhou, Jing Liang, Jianhong Peng, Xinghua Su
Summary: This study presents a simple and cost-effective method to prepare high-entropy oxide nanopowders and investigates their performance in supercapacitors. The experimental results demonstrate that the prepared high-entropy nanopowders have high specific capacitance and cycling stability.
JOURNAL OF ENERGY STORAGE
(2023)
Article
Chemistry, Physical
Hengming Yang, Linxin He, Zhaoming Yang, Qingchun Chen, Guoquan Jiang, Junchao Zhu, Rui Xue, Nan Qiu, Yuan Wang
Summary: A dual-phase intergrown anode consisting of spinel and rocksalt phases can be prepared, leveraging the advantages of each phase and allowing for controlled electrochemical properties. This work demonstrates an effective strategy for constructing spinel-rocksalt intergrown structures, with potential implications for material design and new applications in electrochemical energy storage.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Materials Science, Multidisciplinary
Marija Suljagic, Predrag Vulic, Dejan Jeremic, Vladimir Pavlovic, Suzana Filipovic, Lukasz Kilanski, Sabina Lewinska, Anna Slawska-Waniewska, Milica R. Milenkovic, Aleksandar S. Nikolic, Ljubica Andjelkovic
Summary: Starch-coated cobalt ferrites were synthesized using various methods, resulting in materials with pure single-phase spinel structures. The morphology of the samples was found to be non-uniform, with particle aggregation being a dominant process. Starch was confirmed to be present in all coated samples, with particularly high saturation magnetization observed in samples obtained through ultrasonically assisted coprecipitation and microwave-assisted hydrothermal methods.
MATERIALS RESEARCH BULLETIN
(2021)
Review
Chemistry, Multidisciplinary
Vincentas Maciulis, Almira Ramanaviciene, Ieva Plikusiene
Summary: Nanostructured materials formed from metal oxides offer advantages such as large surface area, improved physical properties, and adjustable electronic properties. This review discusses various types of metal oxide nanostructures classified based on size and composition and their application in chemical sensors and biosensors. The synthesis methods of metal oxide nanostructures and their integration in sensor design are also analyzed in detail.
Article
Chemistry, Multidisciplinary
Fatemeh Shahbazi Farahani, Mohammad S. Rahmanifar, Abolhassan Noori, Maher F. El-Kady, Nasim Hassani, Mehdi Neek-Amal, Richard B. Kaner, Mir F. Mousavi
Summary: The need for sustainable energy production and storage has led researchers to explore advanced functional materials. In this study, a reductive electrosynthesis method was used to prepare a trimetallic metal-organic framework (MOF) with excellent electrocatalytic and energy storage properties.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Energy & Fuels
Mir F. Mousavi, Mohammad S. Rahmanifar, Abolhassan Noori, Elaheh Dadashpour, Yasin Shabangoli
Summary: This research introduces a method to prepare the LDH-GA nanocomposite material for high-performance supercapacitors, which demonstrates outstanding supercapacitive performance in both negative and positive electrodes. A water-soluble device with a wide voltage window is also fabricated, showing improved specific capacitance, specific energy, and specific power, along with 88% retention of initial capacitance after 10,000 cycles.
Article
Chemistry, Multidisciplinary
Liron Issman, Philipp A. Kloza, Jeronimo Terrones Portas, Brian Collins, Afshin Pendashteh, Martin Pick, Juan J. Vilatela, James A. Elliott, Adam Boies
Summary: Carbon nanotube bundles were aligned using an altered direct spinning method and an AC electric field, resulting in enhanced electrical and tensile properties in the resulting textiles.
Article
Chemistry, Physical
Afshin Pendashteh, Brahim Orayech, Hugo Suharcl, Maria Jauregui, Jon Ajuria, Begona Silvan, Skye Clarke, Francisco Bonilla, Damien Saurel
Summary: A mechanical treatment strategy is proposed to improve the performance of soft carbon materials as negative electrodes in sodium-ion batteries. The study reveals that mechanical treatment at an intermediate stage can significantly change the structure and properties of the carbon matrix. The optimized samples show high initial coulombic efficiency, reversible capacity, and high-rate performance, providing a new approach for developing high-performance soft carbon-based electrodes for energy storage.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Ali Khodabandehlo, Abolhassan Noori, Mohammad S. Rahmanifar, Maher F. El-Kady, Richard B. Kaner, Mir F. Mousavi
Summary: This article presents a facile and scalable strategy for fabricating a substrate-free supercapacitor through laser reduction of graphene oxide and electrodeposition of polyaniline. The fabricated supercapacitor is part of a flexible multifunctional integrated system that includes a humidity sensor, a resistor, and an NFC antenna for IoT-linked wireless communication. The research demonstrates high energy and power density, along with outstanding rate capability for the supercapacitor, and high resistance changes and quick response time for the humidity sensor. This study paves the way for limitless applications of IoT.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Tengfei Zhang, Chen Li, Fan Wang, Abolhassan Noori, Mir F. Mousavi, Xinhui Xia, Yongqi Zhang
Summary: Sodium-ion batteries have gained significant attention for large-scale energy storage applications due to their abundant resources and similar working mechanism to lithium-ion batteries. The design of high-performance and low-cost anode materials remains a critical bottleneck in the development of sodium-ion batteries. Carbon-based materials, including hard carbons, soft carbons, and synthetic carbon allotropes, are considered promising anode materials for sodium-ion batteries due to their high electronic conductivity, abundant active sites, hierarchical porosity, and excellent mechanical stability. This review summarizes the latest progress in the development of carbon-based negative electrodes for sodium-ion batteries, providing a comprehensive understanding of their physical properties, sodium ions storage mechanisms, and improvement measures for addressing current challenges. Future research directions for sodium-ion batteries are also proposed, offering important insights into the further development of carbon-based materials for sodium-ion batteries.
Editorial Material
Materials Science, Multidisciplinary
Yongqi Zhang, Chen Li, Feng Cao, Abolhassan Noori, Mir F. Mousavi, Xinhui Xia
MATERIALS RESEARCH BULLETIN
(2022)
Article
Nanoscience & Nanotechnology
Mahrokh Nazari, Abolhassan Noori, Mohammad S. Rahmanifar, Maher F. El-Kady, Nasim Hassani, Mehdi Neek-Amal, Richard B. Kaner, Mir F. Mousavi
Summary: Transition-metal chalcogenides, such as nickel selenide, have shown promise as materials for energy storage applications due to their abundant supply, high theoretical capacity, and excellent electrical conductivity. In this study, a facile and efficient electrodeposition method was used to prepare high-performance nickel selenide nanostructures, which exhibited superior energy storage performance when converted to specific polymorphs through cycling. A hybrid device consisting of activated carbon and nickel selenide was fabricated, delivering high specific energy, specific power, and exceptional cycling stability. The enhanced performance of the device was attributed to the development of high-performance nickel selenide polymorphs. Density functional theory calculations were also employed to investigate the origins of the superior energy storage performance, revealing the importance of the density of states, electrical conductivity, and quantum capacitance. This study provides an appealing approach for tailoring the phase composition of nickel selenide, offering an alternative to commonly used templated synthesis methods.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Navid Khodayar, Abolhassan Noori, Mohammad S. Rahmanifar, Yasin Shabangoli, Afshin Baghervand, Maher F. El-Kady, Nasim Hassani, Xueying Chang, Mehdi Neek-Amal, Richard B. Kaner, Mir F. Mousavi
Summary: An aqueous rechargeable zinc-based superbattery, consisting of a mixed ZnCO3 MnCO3 grafted onto a graphene aerogel (ZMG) negative electrode and a nanotubular sulfidated Ni-Co-Fe layered double hydroxide (LDHS) positive electrode, delivers excellent capacity, rate capability, specific energy and power, as well as high output voltage and unprecedented cycling stability.
ADVANCED ENERGY MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Shegufta Upama, Anastasiia Mikhalchan, Luis Arevalo, Moumita Rana, Afshin Pendashteh, Micah J. Green, Juan J. Vilatela
Summary: This study presents a new processing route using Joule heating to create a nanostructured network composite of carbon nanotube fabrics and an inorganic phase (MoS2), and investigates its structure and properties. The processing method is applicable to a wide range of nanocarbon-based composites with inorganic phases, producing materials with high strength and electrical conductivity.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Physical
Masumeh Moloudi, Abolhassan Noori, Mohammad S. Rahmanifar, Yasin Shabangoli, Maher F. El-Kady, Nahla B. Mohamed, Richard B. Kaner, Mir F. Mousavi
Summary: Layered double hydroxides (LDHs) serve as versatile platforms for modulating the electronic structure of earth-abundant transition metal-based electrocatalysts for various energy-related reactions. This study demonstrates the use of electrodeposited Ni-Co-Fe LDHs on Ni nanocones-decorated Ni foam as a template for the electrosynthesis of NiCoFeB from a K2B4O7 solution. The resulting amorphous tri-metal borate (TMB) exhibits excellent electrocatalytic activities for HER, OER, and ORR, as well as high durability. A zinc-air battery using TMB@NiNC dual oxygen catalyst cathode shows superior performance compared to commercial noble metal benchmarks.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhong Qiu, Shenghui Shen, Ping Liu, Chen Li, Yu Zhong, Han Su, Xueer Xu, Yongqi Zhang, Feng Cao, Abolhassan Noori, Mir F. F. Mousavi, Minghua Chen, Xinping He, Xinhui Xia, Yang Xia, Wenkui Zhang, Jiangping Tu
Summary: In this study, a groundbreaking in situ plasma interphase engineering method is reported for the construction of high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal anodes to stabilize and protect them, which is crucial for the breakthrough of Li metal batteries.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
D. Saurel, A. Pendashteh, M. Jauregui, M. Reynaud, M. Fehse, M. Galceran, M. Casas-Cabanas
Summary: Careful control of experimental parameters is crucial in obtaining high-quality data from operando measurements, including cell configuration, nature of cell components, electrode preparation approach, optical/goniometer geometry, data acquisition protocols, and data interpretation methodology.
Article
Materials Science, Multidisciplinary
Madeeha Riaz, Manahil Najam, Hina Imtiaz, Farooq Bashir, Tousif Hussain
Summary: This study focuses on the structural and biological analysis of Zn-Cu based biodegradable alloys for orthopedic applications. The results indicate that the alloys have good electrical conductivity and biocompatibility, with potential for promoting bone growth and healing process. Additionally, the alloys exhibit a low corrosion rate and improved corrosion resistance.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Rijo Rajeev, Sk Safikul Islam, Anitha Varghese, Gurumurthy Hegde, Suryasarathi Bose
Summary: In this study, a facile and selective electrochemical sensor was developed for the sensing of guanosine. The sensor utilized a unique porous structure and ordered framework, enabling linear detection of guanosine concentration in the range of 0.123-720 μM under specific conditions.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Rafael V. M. Freire, Dominique Celeste de A. Dias, Jose Yago Rodrigues Silva, Dayane Kelly Dias do Nascimento Santos, Larissa T. Jesus, Ricardo O. Freire, Severino A. Junior
Summary: This study reports the extraction and isolation of euphol from nature, its adsorption in nanosized ZIF-8, and the efficacy of this system against cancer cells. Experimental and simulation results show that ZIF-8 can enhance the effectiveness of euphol against cancer cells and selectively target cancer cells.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Manal A. Awad, Awatif A. Hendi, Maha M. Almoneef, Maymunah Alwehaibi, Khalid M. Ortashi, Wadha Alenazi, Fatimah S. Alfaifi, Shareefa Alahmariye, Asma Alangery, Warda Ali Alghoubiri, Haia Aldosari
Summary: In this study, magnesium-doped zinc oxide nanoparticles were synthesized and characterized. The research findings show that magnesium doping can alter the crystal structure and optical properties of zinc oxide, while enhancing its dielectric constant.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
F. J. Willars-Rodriguez, I. R. Chaverz-Urbiola, M. A. Hernandez-Landaverde, A. Zavala-Franco, E. A. Chavez-Urbiola, P. Vorobiev, Yu V. Vorobiev
Summary: This study focuses on manganese doped CdS thin films synthesized by chemical bath deposition. The incorporation of Mn2+ cations in CdS was found to influence the crystalline structure, morphology, and optoelectronic properties. Doped thin films exhibited a uniform hexagonal structure, changed growth orientation, and showed scale-like and needle-like morphologies. The bandgap and rectification speed of Schottky diodes were modified by introducing manganese. This study suggests the potential for affordable high-speed optoelectronic devices.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Mehdi Javidi, Hooman Karimi Abadeh, Fatemeh Namazi, Hamid Reza Yazdanpanah, Narjes Shirvani Shiri
Summary: This study investigated the synergistic effect of temperature, solution velocity, and sulphuric acid concentration on the corrosion behavior of carbon steel using response surface methodology. The results showed that temperature affected anodic reactions, solution velocity influenced cathodic reactions, and acid concentration altered the corrosion mechanisms by changing the properties of the surface layer.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
R. Sakthivel, Thirumoorthy Kulandaivel, Kirankumar Venkatesan Savunthari, K. Mohanraj, Hans-Uwe Dahms, Aswin kumar Anbalagan, Manjunath Rangasamy, Kien-Voon Kong
Summary: In this study, saturated fatty acids were incorporated with silane to modify viscose fabric, resulting in superhydrophobic and superoleophilic properties. The modified fabric showed excellent separation efficiency for oil and organic solvents, with high absorption capacity. The modified fabric also exhibited durability and retained its properties in harsh conditions.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Wei Zhang, Hong Lei, Wenqing Liu, Zefang Zhang, Yi Chen, Xiaogang Hu, Xiangshan Ye
Summary: In this study, EDTA-grafted alumina composite abrasives were produced by a two-step process for the CMP of sapphire substrates. Experimental results showed that the modified abrasives exhibited better dispersion properties and significantly improved polishing efficiency, with higher material removal rates and lower surface roughness. The combination of chemical reaction and mechanical action enhanced the CMP performance.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Shumaila Rafaqat, Bushra Perveen, Warda Raqba, Warda Imran, Arshad Hussain, Naeem Ali
Summary: This study developed a MnP-based biosensor for quantitative measurement of dye concentrations using electrochemical signals. The effects of two different dyes on MnP activity were investigated, with one dye showing inhibitory effects and the other dye having no effect. The study demonstrates the potential application of enzyme-based biosensors in dye detection and toxicological monitoring.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Jinyan Shi, Oguzhan Yavuz Bayraktar, Baris Bayrak, Burak Bodur, Ali Oz, Gokhan Kaplan, Abdulkadir Cuneyt Aydin
Summary: The elemental composition of precursors is crucial for the performance development of geopolymers. The use of lime instead of metakaolin increases the fluidity and mechanical properties of geopolymers, while the addition of gypsum decreases them. Furthermore, higher lime content exacerbates the negative effect of gypsum.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Aayush Gupta, Kaveri Ajravat, Loveleen K. Brar, O. P. Pandey, Pandey Rajagopalan
Summary: This study focuses on the performance of Mn3O4-ZnO composite material in wastewater treatment and energy storage applications, and presents a detailed comparative analysis. Results show that the composite material with equal concentrations of Mn3O4 and ZnO exhibits excellent photocatalytic activity and high capacitance.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
V. Murugabalaji, Matruprasad Rout, Harsh Soni, Biranchi Narayan Sahoo
Summary: This study focuses on the corrosion characteristics of AA 7075 and AA 7075 based hybrid composite fabricated using stir casting and hot rolling techniques. The results show that the hybrid composite produced by hot cross rolling exhibits better corrosion resistance compared to the base metal. The addition of a small amount of graphite improves the bonding between the matrix and reinforcements, and the hot cross rolling enhances this bonding, leading to the formation of a strong passivation oxide layer and increased charge transfer resistance, thereby improving corrosion resistance.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Fangkun Ning, Qinghao Shi, Shuping Kong, Weitao Jia, Lifeng Ma
Summary: The paper investigates a new method of rolling sheets with variable chamfering amounts in both the transversal and normal directions. The feasibility of the technological process was tested through simulation and compared with experimental results. Three important process parameters, temperature, stress, and flow velocity, were used to evaluate the effects on chamfering amount before determining the optimal angle. The spread formula for evaluating the shape quality of the plate after ECR was obtained through testing and theory.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
Aqeel Abbas, M. A. Hussein, Mohamed Javid
Summary: In this study, the AM60 magnesium alloy was processed using high-energy ball milling, and the results showed that different reinforcement agents had certain effects on particle size, crystallite size, lattice strain, and dislocation density.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
Article
Materials Science, Multidisciplinary
D. S. Mahmoud, E. M. Eldesouki, W. M. Abd El-Gawad
Summary: The development of flexible and lightweight microwave-absorbing materials has become a trendy topic. This study focuses on enhancing the microwave-absorbing performance of butadiene-acrylonitrile rubber (NBR) by incorporating novel reinforcing nanofillers. The results show that the NBR nanocomposite with a loading of 16 parts per hundred rubber (phr) of LiFe 20%/Si has the best microwave-absorbing performance.
MATERIALS CHEMISTRY AND PHYSICS
(2024)
