Effect of Process Parameters on Friction Stir Welded Joints between Dissimilar Aluminum Alloys: A Review
出版年份 2023 全文链接
标题
Effect of Process Parameters on Friction Stir Welded Joints between Dissimilar Aluminum Alloys: A Review
作者
关键词
-
出版物
Metals
Volume 13, Issue 7, Pages 1176
出版商
MDPI AG
发表日期
2023-06-26
DOI
10.3390/met13071176
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Influence of friction stir welding parameters on the tribological behavior of dissimilar aluminum alloy joint
- (2023) Sivaselvan S. et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Appraising Tool Wear during Secondary Heating Assisted Dissimilar Friction Stir Welding between 6061 and 7075 Aluminium Alloys
- (2023) Madhav Raturi et al. MATERIALS TRANSACTIONS
- Multi-Objective Modified Differential Evolution Methods for the Optimal Parameters of Aluminum Friction Stir Welding Processes of AA6061-T6 and AA5083-H112
- (2023) Peerawat Luesak et al. Metals
- Prediction of Mechanical Properties and Optimization of Friction Stir Welded 2195 Aluminum Alloy Based on BP Neural Network
- (2023) Fanqi Yu et al. Metals
- Numerical simulation of weld formation in friction stir welding based on non-uniform tool-workpiece interaction: An effect of tool pin size
- (2023) Jie Chen et al. Journal of Manufacturing Processes
- Difficulties and redressal in joining of aluminium alloys by GMA and GTA welding: A review
- (2023) Rajesh P. Verma et al. Journal of Materials Research and Technology-JMR&T
- Ensemble Deep Learning Ultimate Tensile Strength Classification Model for Weld Seam of Asymmetric Friction Stir Welding
- (2023) Somphop Chiaranai et al. Processes
- Mathematical Model for the Temperature Distribution on The Surface of Two Aluminum Alloys Welded by Friction Stir Welding
- (2023) E. T. Karash et al. Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology
- A Parametric Study on the Effect of FSW Parameters and the Tool Geometry on the Tensile Strength of AA2024–AA7075 Joints: Microstructure and Fracture
- (2023) Reza Beygi et al. Lubricants
- Welding and galvanic coupling effects on the electrochemical activity of dissimilar AA2050 and AA7050 aluminum alloys welded by Friction Stir Welding (FSW)
- (2023) Bárbara Victoria G. de Viveiros et al. ELECTROCHIMICA ACTA
- Applications of machine learning in friction stir welding: Prediction of joint properties, real-time control and tool failure diagnosis
- (2023) Ammar H. Elsheikh ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE
- Dissimilar welding of AA5083/AA7039 by self-reacting friction stir welding
- (2023) Amin Rabiezadeh et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Dissimilar friction stir welding of 2219-T8 and 2195-T8 aluminum alloys: part I—microstructure evolution and mechanical properties
- (2023) Zhenlin Wang et al. JOURNAL OF MATERIALS SCIENCE
- FSW of extruded and additively manufactured parts for automotive components
- (2023) Francesco Napolitano et al. MATERIALS AND MANUFACTURING PROCESSES
- Prediction of Tool Eccentricity Effects on the Mechanical Properties of Friction Stir Welded AA5754-H24 Aluminum Alloy Using ANN Model
- (2023) Ahmed R. S. Essa et al. Materials
- Post Weld Heat Treatment Optimization of Dissimilar Friction Stir Welded AA2024-T3 and AA7075-T651 Using Machine Learning and Metaheuristics
- (2023) Pinmanee Insua et al. Materials
- Experimental Studies on Mechanical Behavior of TIG and Friction Stir Welded AA5083 -AA7075 Dissimilar Aluminum Alloys
- (2023) Veeraiah Goriparthi et al. Advances in Materials Science and Engineering
- A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior
- (2023) Reza Beygi et al. Metals
- Effect of Tool Rotation Direction on Mechanical Strength of Single Lap Friction Stir Welded Joints between AA5083 Aluminum Alloy and S355J0 Steel for Maritime Applications
- (2023) Guido Di Bella et al. Metals
- Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel
- (2023) Reza Beygi et al. Metals
- Friction Stir Welding of Non-Heat Treatable Al Alloys: Challenges and Improvements Opportunities
- (2023) Behrouz Abnar et al. Crystals
- Buttering for FSW: Enhancing the fracture toughness of Al-Fe intermetallics through nanocrystallinity and suppressing their growth
- (2023) R. Beygi et al. Journal of Manufacturing Processes
- Investigation of the optimal parameters for butt joints in a friction stir welding (FSW) process with dissimilar aluminium alloys
- (2023) Komsak Harachai et al. Materials Research Express
- Characterization of microstructure and residual stress following the friction stir welding of dissimilar aluminum alloys
- (2023) Nicholas Sabry et al. CIRP Journal of Manufacturing Science and Technology
- Investigation of microstructure characteristics and work hardening behaviour of water-cooled FSW dissimilar aluminium alloys
- (2023) Kethavath Kranthi Kumar et al. Materials Today Communications
- Probing finite element modelling of defects in friction stir welding by tailoring mass scaling factor
- (2023) Debtanay Das et al. Materials Today Communications
- Strain and damage analysis using high resolution digital image correlation in the stir zone of an AA6061-AA7075 dissimilar friction stir weld
- (2023) Nicolas Dimov et al. Materials Today Communications
- Effect of welding speeds on the metallurgical and mechanical property characterization of friction stir welding between dissimilar aerospace grade 7050 T7651-2014A T6 aluminium alloys
- (2023) B. Anandan et al. Materials Today Communications
- Multi-response optimization of process parameters during friction stir welding of AA2014-AA7075 using TOPSIS Approach
- (2023) P. UMAMAHESWARRAO INCAS Bulletin
- A Multiple Response Prediction Model for Dissimilar AA-5083 and AA-6061 Friction Stir Welding Using a Combination of AMIS and Machine Learning
- (2023) Rungwasun Kraiklang et al. Computation
- Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process
- (2023) Yodprem Pookamnerd et al. EUREKA, Physics and Engineering
- Microstructure evolution and its effect on the corrosion of dissimilar aluminum alloys friction stir welding joint
- (2023) Hongjian Lu et al. CORROSION SCIENCE
- Revealing the mechanism of tool tilting on suppressing the formation of void defects in friction stir welding
- (2023) Xue Wang et al. Journal of Materials Research and Technology-JMR&T
- Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys
- (2022) R. Raja et al. Advances in Materials Science and Engineering
- Semi-analytical model for material flow behavior in thick plates via friction stir welding
- (2022) Ke Yuan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of the Tool Pin Eccentricity and Cooling Rate on Microstructure, Mechanical Properties, Fretting Wear, and Corrosion Behavior of Friction Stir Processed AA6063 Alloy
- (2022) Mahesh Patel et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of tool pin profile on the mechanical and microstructural properties of dissimilar friction stir welded AA5083-H111 and AA6061-T6 aluminium alloys
- (2022) Shine K et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- A coupled experimental and numerical analysis of AA6063 friction stir welding
- (2022) Ahmed Y Shash et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Microstructure evaluation of dissimilar AA2024 and AA7050 aluminum joints made by corner stationary-shoulder friction stir welding
- (2022) V. Mertinger et al. Welding in the World
- Evaluation of axial force, tool torque and weld quality of friction stir welded dissimilar 6061/5083 aluminum alloys
- (2022) Hepeng Jia et al. CIRP Journal of Manufacturing Science and Technology
- Optimization of process parameters for friction stir welding of dissimilar aluminum alloys using different Taguchi arrays
- (2022) Mohamed Mohamed Abd Elnabi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The role of pin eccentricity in friction stir welding of Al-Mg-Si alloy sheets: microstructural evolution and mechanical properties
- (2022) Wentao Hou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of Ultrasonic Vibration in Friction Stir Welding of 2219 Aluminum Alloy: An Effective Model for Predicting Weld Strength
- (2022) Fei Xue et al. Metals
- Thermomechanical analysis of induction assisted friction stir welding of Inconel 718 alloy: A finite element approach
- (2022) Ranamay Saha et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Sustainability-based optimization of dissimilar friction stir welding parameters in terms of energy saving, product quality, and cost-effectiveness
- (2022) Trung-Thanh Nguyen et al. NEURAL COMPUTING & APPLICATIONS
- Improvement of Mechanical Behavior of FSW Dissimilar Aluminum Alloys by Postweld Heat Treatments
- (2022) S. Prabhu et al. Advances in Materials Science and Engineering
- Influence of Friction Stir Welding Process on the Mechanical Characteristics of the Hybrid Joints AA2198-T8 to AA2024-T3
- (2022) Ahmed Samir Anwar Alemdar et al. Advances in Materials Science and Engineering
- Modeling Friction Stir Welding: On Prediction and Numerical Tool Development
- (2022) Max Hossfeld Metals
- Influence of the Tool Rotational Speed on Physical and Chemical Properties of Dissimilar Friction-Stir-Welded AA5083/AA6060 Joints
- (2022) Aleksandra Laska et al. Metals
- A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends
- (2022) D.A.P. Prabhakar et al. Journal of Materials Research and Technology-JMR&T
- Numerical modeling for the mechanism of shoulder and pin features affecting thermal and material flow behavior in friction stir welding
- (2022) Hua Ji et al. Journal of Materials Research and Technology-JMR&T
- Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications
- (2022) Shoaib Ahmed et al. Journal of Marine Science and Engineering
- Experimental Analysis of Tensile Strength of Different Thicknesses and Dissimilar Aluminum Alloys in Friction Stir Welding
- (2022) Prashant Prakash et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Enhanced mechanical and anticorrosion properties in cryogenic friction stir processed duplex stainless steel
- (2022) Fujun Cao et al. MATERIALS & DESIGN
- Material Defects in Friction Stir Welding through Thermo–Mechanical Simulation: Dissimilar Materials with Tool Wear Consideration
- (2022) Debtanay Das et al. Materials
- Dissimilar Friction Stir Welding of AA2519 and AA5182
- (2022) Ivan S. Zuiko et al. Materials
- Towards material flow prediction in friction stir welding accounting for mechanisms governing chip formation in orthogonal cutting
- (2022) D. Ambrosio et al. Journal of Manufacturing Processes
- A novel approach to determine residual stress field during FSW of AZ91 Mg alloy using combined smoothed particle hydrodynamics/neuro-fuzzy computations and ultrasonic testing
- (2021) A.R. Eivani et al. Journal of Magnesium and Alloys
- Optimization of friction stir welding parameters of dissimilar aluminium alloys 6061 and 5083 by using response surface methodology
- (2021) Sanjeev Verma et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- A comprehensive review on the effect of precipitation on mechanical properties of friction stir welded aluminium alloys
- (2021) C Shyamlal et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Strength and fracture behavior of AA2A14-T6 aluminum alloy friction stir welded joints
- (2021) Yue Wang et al. Welding in the World
- Comparative evaluation of the effect of the substrate thickness and inherent process defects on the static and fatigue performance of FSW and adhesive-bonded overlap-joints in an AA6016 alloy
- (2021) Enrico Lertora et al. Journal of Manufacturing Processes
- Plastic behavior-dependent weldability of heat-treatable aluminum alloys in friction stir welding
- (2021) Danilo Ambrosio et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Friction stir welding joints of 2195-T8 Al–Li alloys: Correlation of temperature evolution, microstructure and mechanical properties
- (2021) Chen Peng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM
- (2021) M. Kavitha et al. Advances in Materials Science and Engineering
- Effect of Tool Profile Influence in Dissimilar Friction Stir Welding of Aluminium Alloys (AA5083 and AA7068)
- (2021) S. Jayaprakash et al. Advances in Materials Science and Engineering
- Low cycle fatigue properties of friction stir welded dissimilar 2024-to-7075 aluminum alloy joints
- (2021) Pengliang Niu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Review of recent trends in friction stir welding process of aluminum alloys and aluminum metal matrix composites
- (2021) John VICTOR CHRISTY et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A new damage evolution criterion for the coupled Eulerian-Lagrangian approach: Application to three-dimensional numerical simulation of segmented chip formation mechanisms in orthogonal cutting
- (2021) D. Ambrosio et al. Journal of Manufacturing Processes
- Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization
- (2021) Fausto Tucci et al. CIRP Journal of Manufacturing Science and Technology
- New Approaches to Friction Stir Welding of Aluminum Light-Alloys
- (2020) Marcello Cabibbo et al. Metals
- Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds
- (2020) Luqman Hakim Ahmad Shah et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A fully coupled thermo-mechanical numerical modelling of the refill friction stir spot welding process in Alclad 7075-T6 aluminium alloy sheets
- (2020) Andrzej Kubit et al. Archives of Civil and Mechanical Engineering
- Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity
- (2020) L.H. Shah et al. MATERIALS LETTERS
- Utilization of Random Vector Functional Link integrated with Marine Predators Algorithm for tensile behavior prediction of dissimilar friction stir welded aluminum alloy joints
- (2020) Mohamed Abd Elaziz et al. Journal of Materials Research and Technology-JMR&T
- Recent progress on control strategies for inherent issues in friction stir welding
- (2020) Xiangchen Meng et al. PROGRESS IN MATERIALS SCIENCE
- On the Friction Stir Welding of Al 7075 Thin Sheets
- (2020) Andreas Dimopoulos et al. Metals
- Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020
- (2020) Mohamed M. Z. Ahmed et al. Metals
- Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications
- (2019) Alessio Gullino et al. Metals
- Friction Stir Welding of Dissimilar Aluminum Alloy Combinations: State-of-the-Art
- (2019) Vivek Patel et al. Metals
- Influence of Tool Shoulder Concave Angle and Pin Profile on Mechanical Properties and Microstructural Behaviour of Friction Stir Welded AA7075-T651 and AA6061 Dissimilar Joint
- (2019) Yuvaraj Kunnathur Periyasamy et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Prediction of weld formation in 5083 aluminum alloy by twin-wire CMT welding based on deep learning
- (2019) Limeng Yin et al. Welding in the World
- Investigation on Effect of Strain Rate and Heat Generation on Traverse Force in FSW of Dissimilar Aerospace Grade Aluminium Alloys
- (2019) Noor Zaman Khan et al. Materials
- Challenges to Be Tackled in the Computational Modeling and Numerical Simulation of FSW Processes
- (2019) Carlos Agelet De Saracibar Metals
- Numerical Simulation for FSW Process at Welding Aluminium Alloy AA6082-T6
- (2019) Nikola Sibalic et al. Metals
- Effect of Tool Rotational Speed on the Microstructure and Mechanical Properties of Bobbin Tool Friction Stir Welded 6082-T6 Aluminum Alloy
- (2019) Yupeng Li et al. Metals
- Effect of process parameters on mechanical properties of friction stir welded dissimilar 7075-T651 and 5083-H111 aluminum alloys
- (2018) Izabela Kalemba-Rec et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental modelling and genetic algorithm-based optimisation of friction stir welding process parameters for joining of dissimilar AA5083-O and AA6063-T6 aluminium alloys
- (2018) Saurabh Kumar Gupta et al. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
- Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints
- (2018) Zhixia Zhao et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of Rotation Speed and Axial Force on the Friction Stir Welding of AISI 410S Ferritic Stainless Steel
- (2018) Gerbson de Queiroz Caetano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Wear-Induced Changes in FSW Tool Pin Profile: Effect of Process Parameters
- (2018) Pankaj Sahlot et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Alloys Position, Rolling and Welding Directions on Properties of AA2024/AA7050 Dissimilar Butt Weld Obtained by Friction Stir Welding
- (2018) et al. Metals
- Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys
- (2018) Mohammed M. Hasan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving the fatigue strength of 7075 alloy through aging
- (2018) L. Leng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys
- (2018) P.L. Niu et al. MATERIALS CHARACTERIZATION
- Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding
- (2018) Narges Dialami et al. Metals
- Joint strength and failure studies of dissimilar AA6061-AA7075 friction stir welds: Effects of tool pin, process parameters and preheating
- (2018) Madhav Raturi et al. ENGINEERING FAILURE ANALYSIS
- Effect of Traverse and Rotational Speeds on the Tensile Behavior of the Underwater Dissimilar Friction Stir Welded Aluminum Alloys
- (2017) Kh. Bijanrostami et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Friction stir welding of similar and dissimilar AA7075 and AA5083
- (2017) M.M.Z. Ahmed et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties in nano and microscale SiC-included dissimilar friction stir welding of AA6061-AA2024
- (2017) Mohammad Mahdi Moradi et al. MATERIALS SCIENCE AND TECHNOLOGY
- Determination of Optimal Process Parameters of Friction Stir Welding to Join Dissimilar Aluminum Alloys Using Artificial Bee Colony Algorithm
- (2017) R. S. S. Prasanth et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW)
- (2017) Bahman Meyghani et al. Metals
- Influence of Process Parameters on the Vertical Forces Generated during Friction Stir Welding of AA6082-T6 and on the Mechanical Properties of the Joints
- (2017) Archimede Forcellese et al. Metals
- Numerical simulation and experimental investigation of friction stir lap welding between aluminum alloys AA2024 and AA7075
- (2016) Jingming Tang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Sheet Configuration on Microstructure and Mechanical Behaviors of Dissimilar Al–Mg–Si/Al–Zn–Mg Aluminum Alloys Friction Stir Welding Joints
- (2016) Zhongjie Yan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Calibration of dynamic tool–workpiece interface temperature measurement during friction stir welding
- (2016) Joshua Schmale et al. MEASUREMENT
- Prediction and optimization of the mechanical properties of dissimilar friction stir welding of aluminum alloys using design of experiments
- (2016) R Palanivel et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Prediction of tensile strength of friction stir weld joints with adaptive neuro-fuzzy inference system (ANFIS) and neural network
- (2016) Mohammad W. Dewan et al. MATERIALS & DESIGN
- Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys
- (2015) Noor Zaman Khan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al–Mg–Cr–Mn (AA 5052-O) alloy
- (2015) Raza Moshwan et al. MATERIALS & DESIGN
- Friction stir welding of dissimilar aluminium–magnesium joints: sheet mutual position effects
- (2015) G. Buffa et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of tool pin features on process response variables during friction stir welding of dissimilar aluminum alloys
- (2015) Md. Reza-E-Rabby et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates
- (2015) B. ABNAR et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties
- (2015) P. Mastanaiah et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Flow patterns in friction stir welds of AA5083 and AA6082 alloys
- (2015) U. Donatus et al. MATERIALS & DESIGN
- Microstructure and residual stress distributions in friction stir welding of dissimilar aluminium alloys
- (2015) Hamed Jamshidi Aval MATERIALS & DESIGN
- Thermo-mechanical finite element model of friction stir welding of dissimilar alloys
- (2014) Fadi Al-Badour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical and metallurgical properties of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys
- (2014) R. PALANIVEL et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Analyzing dissimilar friction stir welding of AA5754/AA7075
- (2013) Şefika Kasman et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Weld temperature effects during friction stir welding of dissimilar aluminum alloys 6061-t6 and 7075-t6
- (2013) E. G. Cole et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State
- (2013) M. Ghosh et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Structure-Property Correlation of AA2014 Friction Stir Welds: Role of Tool Pin Profile
- (2013) K. Ramanjaneyulu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites
- (2013) P. Vijayavel et al. MATERIALS & DESIGN
- Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding
- (2013) Morteza Ghaffarpour et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
- (2013) Sabina Campanelli et al. Materials
- Optimization of process parameters to maximize ultimate tensile strength of friction stir welded dissimilar aluminum alloys using response surface methodology
- (2013) R. Palanivel et al. Journal of Central South University
- Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys
- (2012) R. Palanivel et al. MATERIALS & DESIGN
- Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083 – Optimization of process parameters using Taguchi technique
- (2012) M. Koilraj et al. MATERIALS & DESIGN
- Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm
- (2012) Mohammad Hasan Shojaeefard et al. MATERIALS & DESIGN
- Effect of rotational speeds on microstructure and mechanical properties of friction stir-welded 7075-T6 aluminium alloy
- (2011) H Rezaei et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Mechanical Properties and Welding Power of Friction Stirred AA2024-T35 Joints
- (2010) H. Abd El-Hafez JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Comparing similar and dissimilar friction stir welds of 2017–6005A aluminium alloys
- (2010) A. Simar et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Efficacy of active cooling for controlling residual stresses in friction stir welds
- (2010) D. G. Richards et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of material locations on properties of friction stir welding joints of dissimilar aluminium alloys
- (2010) S.-K. Park et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Toward optimum friction stir welding tool shoulder diameter
- (2010) A. Arora et al. SCRIPTA MATERIALIA
- Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints
- (2009) M. De Giorgi et al. Journal of Mechanical Science and Technology
- The effect of material arrangement on mechanical properties in Friction Stir Welded dissimilar A5052/A5J32 aluminum alloys
- (2009) Nam-Kyu Kim et al. METALS AND MATERIALS INTERNATIONAL
- Influences of process parameters on tensile strength of friction stir welded cast A319 aluminium alloy joints
- (2009) M. Jayaraman et al. METALS AND MATERIALS INTERNATIONAL
- Influence of time on residual stresses in friction stir welds in agehardenable 7xxx aluminium alloys
- (2008) V.M. Linton et al. ACTA MATERIALIA
- Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding
- (2008) P. Cavaliere et al. MATERIALS & DESIGN
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started