Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization
出版年份 2021 全文链接
标题
Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization
作者
关键词
-
出版物
CIRP Journal of Manufacturing Science and Technology
Volume 35, Issue -, Pages 753-764
出版商
Elsevier BV
发表日期
2021-09-25
DOI
10.1016/j.cirpj.2021.09.007
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Optimization of tailor rolled blanks under consideration of function, formability and cost
- (2021) N. Klinke et al. THIN-WALLED STRUCTURES
- Application of tailor rolled blanks in optimum design of pure electric vehicle crashworthiness and lightweight
- (2021) Luxin Yu et al. THIN-WALLED STRUCTURES
- Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
- (2021) Hesamoddin Aghajani Derazkola et al. CIRP Journal of Manufacturing Science and Technology
- Analysis of Friction Stir Welding Tool Offset on the Bonding and Properties of Al–Mg–Si Alloy T-Joints
- (2021) Shabbir Memon et al. Materials
- Incremental forming of friction-stir welded aluminium blanks: an integrated approach
- (2021) P. Carlone et al. International Journal of Material Forming
- Friction stir lap welding of AA2024-T4 with drastically different thickness
- (2020) Yanxin Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Pultruded materials and structures: A review
- (2020) Alexander Vedernikov et al. JOURNAL OF COMPOSITE MATERIALS
- Ultrasonic welding of magnesium alloys: a review
- (2020) Felice Rubino et al. MATERIALS AND MANUFACTURING PROCESSES
- Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
- (2020) A. Heidarzadeh et al. PROGRESS IN MATERIALS SCIENCE
- Recent progress on control strategies for inherent issues in friction stir welding
- (2020) Xiangchen Meng et al. PROGRESS IN MATERIALS SCIENCE
- Modelling of friction stir welding and its influence on the structural behaviour of aluminium stiffened panels
- (2020) R.M.F. Paulo et al. THIN-WALLED STRUCTURES
- Comparison of the corrosion resistance of an Al–Cu alloy and an Al–Cu–Li alloy
- (2019) Mariana X. Milagre et al. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
- Characterization of Al-7075 metal matrix composites: a review
- (2019) Mohammed Imran et al. Journal of Materials Research and Technology-JMR&T
- Dissimilar friction stir lap welding of AA 6082 - Mg AZ31: Force analysis and microstructure evolution
- (2019) Luca Boccarusso et al. Journal of Manufacturing Processes
- Numerical design of high depth-to-width ratio friction stir welding
- (2018) Yongxian Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A review of friction stir welding of steels: Tool, material flow, microstructure, and properties
- (2018) F.C. Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Recent advances in the development of aerospace materials
- (2018) Xuesong Zhang et al. PROGRESS IN AEROSPACE SCIENCES
- Multi-response optimization design of tailor-welded blank (TWB) thin-walled structures using Taguchi-based gray relational analysis
- (2018) Fengxiang Xu et al. THIN-WALLED STRUCTURES
- Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint
- (2018) Mahdi Masoumi Khalilabad et al. Journal of Manufacturing Processes
- Analysis of cooling media effects on microstructure and mechanical properties during FSW/UFSW of AA 6082-T6
- (2018) Mohd Atif Wahid et al. Materials Research Express
- Wind turbine blade recycling: Experiences, challenges and possibilities in a circular economy
- (2018) J.P. Jensen et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Probe shape design for eliminating the defects of friction stir lap welded dissimilar materials
- (2018) Yongxian Huang et al. Journal of Manufacturing Processes
- Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications
- (2018) Nikolai Kashaev et al. Journal of Manufacturing Processes
- Interface characteristic and tensile property of friction stir lap welding of dissimilar aircraft 2060-T8 and 2099-T83 Al–Li alloys
- (2017) Xiangchen Meng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds
- (2017) Masoumeh Pourali et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Origin of unusual fracture in stirred zone for friction stir welded 2198-T8 Al-Li alloy joints
- (2017) Y. Tao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Process Parameters on the Vertical Forces Generated during Friction Stir Welding of AA6082-T6 and on the Mechanical Properties of the Joints
- (2017) Archimede Forcellese et al. Metals
- Recent developments in joining of aluminum alloys
- (2016) Gürel Çam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of the fatigue behaviour of dissimilar aluminium joints produced by friction stir welding
- (2016) V. Infante et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of Reverse-threaded Pin on Mechanical Properties of Friction Stir Lap Welded Alclad 2024 Aluminum Alloy
- (2016) Yumei Yue et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Ultimate tensile strength optimization of different FSW aluminium alloy joints
- (2015) Ana C. F. Silva et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Correlation of microstructure and mechanical properties in friction stir welded 2198-T8 Al–Li alloy
- (2015) Chong Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Friction stir lap joining of 2198 aluminum–lithium alloy with weaving and pulsing variants
- (2015) B.T. Gibson et al. Journal of Manufacturing Processes
- Modelling residual stresses in friction stir welding of Al alloys—a review of possibilities and future trends
- (2014) Jesper H. Hattel et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ageing response of a Al–Cu–Li 2198 alloy
- (2014) Sai-fei Zhang et al. MATERIALS & DESIGN
- Effects of Initial Temper Condition and Postweld Heat Treatment on the Properties of Dissimilar Friction-Stir-Welded Joints between AA7075 and AA6061 Aluminum Alloys
- (2014) Güven İpekoğlu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of use of higher strength interlayer and external cooling on properties of friction stir welded AA6061-T6 joints
- (2014) G. Çam et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of welding parameters on mechanical and fatigue properties of friction stir welded 2198 T8 aluminum–lithium alloy joints
- (2013) Yu E Ma et al. ENGINEERING FRACTURE MECHANICS
- Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates
- (2013) Güven İpekoğlu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Defect features and mechanical properties of friction stir lap welded dissimilar AA2024–AA7075 aluminum alloy sheets
- (2013) Youbao Song et al. MATERIALS & DESIGN
- Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al–Li alloy joints
- (2013) Yu E Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing maps and microstructural evolution of isothermal compressed Al–Cu–Li alloy
- (2013) Hao Yin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions
- (2013) Güven İpekoğlu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Fatigue Properties of a Friction Stir Lap Welded Magnesium Alloy
- (2013) B. S. Naik et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints
- (2013) Y Bozkurt et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Force generation during friction stir welding of AA2024-T3
- (2012) D. Trimble et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014
- (2012) S. Babu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Lap shear strength and fatigue life of friction stir spot welded AZ31 magnesium and 5754 aluminum alloys
- (2012) S.H. Chowdhury et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive
- (2012) S.H. Chowdhury et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process forces and heat input as function of process parameters in AA5083 friction stir welds
- (2012) Rajneesh KUMAR et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Friction stir welded structural materials: beyond Al-alloys
- (2011) G. Çam INTERNATIONAL MATERIALS REVIEWS
- On the Critical Technological Issues of Friction Stir Welding T-Joints of Dissimilar Aluminum Alloys
- (2011) A. Astarita et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy
- (2011) M. Pakdil et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of process parameters on friction stir welding of aluminum alloy 2219-T87
- (2010) Kanwer S. Arora et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
- (2009) G. Buffa et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process forces during friction stir welding of aluminium alloys
- (2009) N. Balasubramanian et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Automatic gap detection in friction stir butt welding operations
- (2008) Yu Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding
- (2008) P. Cavaliere et al. MATERIALS & DESIGN
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More