Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel
出版年份 2023 全文链接
标题
Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel
作者
关键词
-
出版物
Metals
Volume 13, Issue 4, Pages 768
出版商
MDPI AG
发表日期
2023-04-14
DOI
10.3390/met13040768
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Impact Fatigue Life of Adhesively Bonded Composite-Steel Joints Enhanced with the Bi-Adhesive Technique
- (2023) Alireza Akhavan-Safar et al. Materials
- Buttering for FSW: Enhancing the fracture toughness of Al-Fe intermetallics through nanocrystallinity and suppressing their growth
- (2023) R. Beygi et al. Journal of Manufacturing Processes
- A comprehensive review on structural joining techniques in the marine industry
- (2022) F. Delzendehrooy et al. COMPOSITE STRUCTURES
- Elucidation of intermetallic compounds and mechanical properties of dissimilar friction stir lap welded 5052 Al alloy and DP590 steel
- (2022) Peihao Geng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improving the Quality of Dissimilar Al/Steel Butt-Lap Joint via Ultrasonic-Assisted Friction Stir Welding
- (2022) Yu Chen et al. Materials
- Evaluation the effects of welding parameters on tri-dissimilar friction stir welds aluminum/steel
- (2022) Sadiq Aziz Hussein et al. Welding in the World
- Utilizing a ductile damage criterion for fracture analysis of a dissimilar aluminum/steel joint made by friction stir welding
- (2022) R Beygi et al. ENGINEERING FRACTURE MECHANICS
- High-quality dissimilar friction stir welding of Al to steel with no contacting between tool and steel plate
- (2022) M. Zhang et al. MATERIALS CHARACTERIZATION
- Characteristics of the Dissimilar AA7075 and Q235 Steel Joints Fabricated by Friction Stir Welding
- (2022) Yu Chen et al. Metals
- Use of seawater to improve the static strength and fatigue life of bonded coated steel joints
- (2022) M. Ortega-Iguña et al. POLYMER DEGRADATION AND STABILITY
- Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior
- (2021) R. Beygi et al. The International Journal of Advanced Manufacturing Technology
- Effects of Rapid Cooling on Properties of Aluminum-Steel Friction Stir Welded Joint
- (2021) Hamed Aghajani Derazkola et al. Materials
- A comprehensive review on pre- and post-forming evaluation of aluminum to steel blanks via friction stir welding
- (2021) Muhamad Zulkhairi Rizlan et al. The International Journal of Advanced Manufacturing Technology
- A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of η and steel in aluminum/steel joints made by FSW: Microstructure and fracture behavior
- (2021) R. Beygi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental Investigation of Material Properties in FSW Dissimilar Aluminum-Steel Lap Joints
- (2021) Michelangelo Mortello et al. Metals
- Interface stability and fracture mechanism of Al/Steel friction stir lap joints by novel designed tool
- (2021) Jinglin Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Impact of varying tool position on the intermetallic compound formation, metallographic/mechanical characteristics of dissimilar DH36 steel, and aluminum alloy friction stir welds
- (2021) Pardeep Pankaj et al. Welding in the World
- Fracture dominant in friction stir spot welded joint between 6061 aluminum alloy and galvannealed steel based on microscale tensile testing
- (2021) Tomoki Matsuda et al. MATERIALS & DESIGN
- Effects of Ni modified MWCNTs on the microstructural evolution and shear strength of Sn-3.0Ag-0.5Cu composite solder joints
- (2020) Haozhong Wang et al. MATERIALS CHARACTERIZATION
- Effect of Co addition into Ni film on shear strength of solder/Ni/Cu system: Experimental and theoretical investigations
- (2020) Xiaoyang Bi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Friction Stir Welding of Dissimilar Materials: An Investigation of Microstructure and Nano-Indentation Study
- (2020) Raju Prasad Mahto et al. Journal of Manufacturing Processes
- Diffusion Bonding of Al–Fe Enhanced by Gallium
- (2020) Asmawi Ismail et al. Processes
- Formation of metallurgical bonding interface in aluminum-steel bimetal parts by thixotropic-core compound forging
- (2020) Gang Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of Al‐Ni powder addition on dissimilar friction stir welding between AA7075‐T6 and 304 L
- (2020) M.R. Muhamad et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Effect of tool geometry in dissimilar Al-Steel Friction Stir Welding
- (2020) Pankaj Kaushik et al. Journal of Manufacturing Processes
- Evaluation of the formation of intermetallic compounds at the intermixing lines and in the nugget of dissimilar steel/aluminum friction stir welds
- (2020) Mohamed M. Abd Elnabi et al. Journal of Materials Research and Technology-JMR&T
- Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
- (2019) Raju P. Mahto et al. Journal of Manufacturing Processes
- Residual stress measurement of Al/steel dissimilar friction stir weld
- (2019) Daisuke Ogawa et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel
- (2019) Hamed Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Knowledge based design advisory system for multi-material joining
- (2019) Ji Hoon Kim et al. JOURNAL OF MANUFACTURING SYSTEMS
- Microstructure and mechanical/electrochemical properties of friction stir butt welded joint of dissimilar aluminum and steel alloys
- (2019) Sam Yaw Anaman et al. MATERIALS CHARACTERIZATION
- Main Issues in Quality of Friction Stir Welding Joints of Aluminum Alloy and Steel Sheets
- (2019) Mian Wasif Safeen et al. Metals
- Microstructure, mechanical properties and formability of friction stir welded dissimilar materials of IF-steel and 6061 Al alloy
- (2019) Semih Mahmut Aktarer et al. International Journal of Minerals Metallurgy and Materials
- Evaluation of intermetallic compound layer at aluminum/steel interface joined by friction stir scribe technology
- (2019) Tianhao Wang et al. MATERIALS & DESIGN
- Enabling sustainable transportation through joining of dissimilar lightweight materials
- (2019) Sarah Kleinbaum et al. MRS BULLETIN
- A prediction of Fe-Al IMC layer thickness in TIG-assisted hybrid friction stir welded Al/steel dissimilar joints by numerical analysis
- (2019) Hee-Seon Bang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel
- (2019) Tsutomu Tanaka et al. JOURNAL OF MATERIALS SCIENCE
- Strategies for improving the sustainability of structural metals
- (2019) Dierk Raabe et al. NATURE
- First principle calculations and mechanical properties of the intermetallic compounds in a laser welded steel/aluminum joint
- (2019) Yulong Li et al. OPTICS AND LASER TECHNOLOGY
- Interfacial microstructure and mechanical properties of dissimilar aluminum/steel joint fabricated via refilled friction stir spot welding
- (2019) Peng Li et al. Journal of Manufacturing Processes
- Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Formation of intermetallic structures at the interface of steel-to-aluminium explosive welds
- (2018) G.H.S.F.L. Carvalho et al. MATERIALS CHARACTERIZATION
- Joining thick section aluminum to steel with suppressed FeAl intermetallic formation via friction stir dovetailing
- (2018) Md. Reza-E-Rabby et al. SCRIPTA MATERIALIA
- Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties
- (2018) Mohd. Atif WAHID et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A Correlation between the Ultimate Shear Stress and the Thickness Affected by Intermetallic Compounds in Friction Stir Welding of Dissimilar Aluminum Alloy–Stainless Steel Joints
- (2018) Florent Picot et al. Metals
- Effect of process parameters on microstructural and mechanical properties of friction stir diffusion cladded ASTM A516-70 steel using 5052 Al alloy
- (2018) Almigdad B. Ibrahim et al. Journal of Manufacturing Processes
- Effect of silicon, manganese and nickel present in iron on the intermetallic growth at iron - aluminum alloy interface
- (2018) Bhupinder Dangi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Friction stir butt welding of strain-hardened aluminum alloy with high strength steel
- (2018) Tianhao Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on microstructure, mechanical, and electrochemical behaviour of friction stir welded joints between aluminium and 304 stainless steel
- (2018) Balamagendiravarman Murugan et al. Materials Research Express
- Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study
- (2018) H. Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on friction-based joining of dissimilar aluminum–steel joints
- (2018) Kush P. Mehta JOURNAL OF MATERIALS RESEARCH
- Influences of Mono-Ni(P) and Dual-Cu/Ni(P) Plating on the Interfacial Microstructure Evolution of Solder Joints
- (2018) Zhe Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of silicon and manganese on the kinetics and morphology of the intermetallic layer growth during hot-dip aluminizing
- (2018) Hamidreza Azimaee et al. SURFACE & COATINGS TECHNOLOGY
- Effects of heat treatment on the intermetallic compounds and mechanical properties of the stainless steel 321–aluminum 1230 explosive-welding interface
- (2017) Mohammadreza Khanzadeh Gharah Shiran et al. International Journal of Minerals Metallurgy and Materials
- Shear strength and fracture behavior of reflowed Sn3.0Ag0.5Cu/Cu solder joints under various strain rates
- (2017) Xiaowu Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds
- (2017) Masoumeh Pourali et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and enhanced atomic diffusion of friction stir welding aluminium/steel joints
- (2017) Yanni Wei et al. MATERIALS SCIENCE AND TECHNOLOGY
- Influence of zinc on intermetallic compounds formed in friction stir welding of AA5754 aluminium alloy to galvanised ultra-high strength steel
- (2017) Wallop Ratanathavorn et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Analysis and modeling of the growth of intermetallic compounds in aluminum–steel joints
- (2017) Gang Zhang et al. RSC Advances
- Tool geometry optimization in friction stir spot welding of Al-steel joints
- (2017) Joaquín M. Piccini et al. Journal of Manufacturing Processes
- Microstructural characteristics and mechanical properties of the dissimilar friction-stir butt welds between an Al–Mg alloy and A316L stainless steel
- (2016) R . Rafiei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints
- (2016) A. Yazdipour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Al-Rich Part of the Fe-Al Phase Diagram
- (2016) Xiaolin Li et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Aluminium-steel lap joining by multipass friction stir welding
- (2016) C. Leitao et al. MATERIALS & DESIGN
- Influence of tool traverse speed on the characteristics of dissimilar friction stir welded aluminium alloy, AA5052 and HSLA steel joints
- (2015) K.K. Ramachandran et al. Archives of Civil and Mechanical Engineering
- Crystallography of Fe 2 Al 5 phase at the interface between solid Fe and liquid Al
- (2015) Naoki Takata et al. INTERMETALLICS
- Aluminum/steel joints made by an alternative friction stir spot welding process
- (2015) E. Fereiduni et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior
- (2015) R. Beygi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
- (2015) Sang-Heon Kim et al. NATURE
- Solid-State Diffusion Reaction and Formation of Intermetallic Phases in the Fe-Al System
- (2014) K. Bhanumurthy et al. FUSION SCIENCE AND TECHNOLOGY
- Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
- (2014) Xun Liu et al. MATERIALS & DESIGN
- Growth kinetics of Al–Fe intermetallic compounds during annealing treatment of friction stir lap welds
- (2014) M. Movahedi et al. MATERIALS CHARACTERIZATION
- Study on the Formation and Characterization of the Intermetallics in Friction Stir Welding of Aluminum Alloy to Coated Steel Sheet Lap Joint
- (2014) H. Das et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Honda develops robotized FSW technology to weld steel and aluminum and applied it to a mass‐production vehicle
- (2013) Yoshihiro Kusuda Industrial Robot-The International Journal of Robotics Research and Application
- Evaluation of elastic modulus and hardness of Fe–Al base intermetallics by nano-indentation techniques
- (2013) E. Frutos et al. INTERMETALLICS
- Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure aluminium
- (2013) S. Kundu et al. MATERIALS & DESIGN
- Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel
- (2013) M. Dehghani et al. MATERIALS & DESIGN
- Friction stir weld assisted diffusion bonding of 5754 aluminum alloy to coated high strength steels
- (2013) M. Haghshenas et al. MATERIALS & DESIGN
- Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites
- (2013) R. Beygi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Numerical and experimental investigation on friction stir lap welding of aluminium to steel
- (2013) H. Das et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Butt joining of Al–Cu bilayer sheet through friction stir welding
- (2013) R. BEYGI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld
- (2013) M. DEHGHANI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Influence of energy induced from processing parameters on the mechanical properties of friction stir welded lap joint of aluminum to coated steel sheet
- (2012) Hrishikesh Das et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld
- (2012) M. Movahedi et al. MATERIALS & DESIGN
- Combined ab initio and experimental study of A2 + L21 coherent equilibria in the Fe–Al–X (X = Ti, Nb, V) systems
- (2011) P.R. Alonso et al. INTERMETALLICS
- Phase formation in Al–Fe thin film systems
- (2011) Fanta Haidara et al. INTERMETALLICS
- Variables affecting growth and morphology of the intermetallic layer (Fe2Al5)
- (2011) M. Yousaf et al. MATERIALS CHARACTERIZATION
- Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys
- (2011) H. Springer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Growth Manner of Intermetallic Compound Layer Produced at Welding Interface of Friction Stir Spot Welded Aluminum/Steel Lap Joint
- (2011) Mitsuhiro Watanabe et al. MATERIALS TRANSACTIONS
- Investigation of bonding strength and sealing behavior of aluminum/stainless steel bonded at room temperature
- (2010) M.M.R. Howlader et al. VACUUM
- Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys
- (2009) Tsutomu Tanaka et al. SCRIPTA MATERIALIA
- Interface microstructure study of friction stir lap joint of AC4C cast aluminum alloy and zinc-coated steel
- (2008) Y.C. Chen et al. MATERIALS CHEMISTRY AND PHYSICS
- Effect of Ag, Fe, Au and Ni on the growth kinetics of Sn–Cu intermetallic compound layers
- (2008) T. Laurila et al. MICROELECTRONICS RELIABILITY
- Growth of intermetallic layer at roll bonded IF-steel/aluminum interface
- (2007) Vikas Jindal et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started