Improving superficial microstructure and properties of the laser-processed ultrathin kerf in Ti-6Al-4V alloy by water-jet guiding

Study of the surface integrity and mechanical properties of turbine blade fir trees manufactured in Inconel 939 using laser powder bed fusion

(2022) Ozan Can Ozaner et al.   Journal of Manufacturing Processes

Effect of electrostatic field on microstructure and mechanical properties of the 316L stainless steel modified layer fabricated by laser cladding

(2022) Wentai Ouyang et al.   MATERIALS CHARACTERIZATION

A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

(2022) Junke Jiao et al.   Micromachines

Preparation and properties of electrodeposited Ni-B-V2O5 composite coatings

(2021) Umesh Somaji Waware et al.   SURFACE & COATINGS TECHNOLOGY

Numerical Simulation on Pulsed Laser Ablation of the Single-Crystal Superalloy Considering Material Moving Front and Effect of Comprehensive Heat Dissipation

(2021) Bin Wang et al.   Micromachines

Experimental characterization and real-time monitoring for laser percussion drilling in titanium alloy using transverse electric field assistance and/or lateral air blowing

(2021) Houxiao Wang et al.   Journal of Manufacturing Processes

Sub-picosecond single-pulse laser ablation of the CrMnFeCoNi high entropy alloy and comparison to stainless steel AISI 304

(2021) D. Redka et al.   APPLIED SURFACE SCIENCE

Effect of cooling rate on phase transformation in 6–8 wt% YSZ APS TBCs

(2021) G. Roncallo et al.   SURFACE & COATINGS TECHNOLOGY

Coaxial helical gas assisted laser water jet machining of SiC/SiC ceramic matrix composites

(2021) Bai Cheng et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

A comparative study on mechanical properties of Ti–6Al–4V alloy processed by additive manufacturing vs. traditional processing

(2021) X.P. Ren et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experimental study on water jet guided laser micro-machining of mono-crystalline silicon

(2021) Hongchao Qiao et al.   OPTICS AND LASER TECHNOLOGY

Deformation mechanisms in ultrafine-grained metals with an emphasis on the Hall–Petch relationship and strain rate sensitivity

(2021) Roberto B. Figueiredo et al.   Journal of Materials Research and Technology-JMR&T

Crystallographic orientation and wear characteristics of TiN, SiC, Nb embedded Al7075 composite

(2021) V. Chakkravarthy et al.   MATERIALS LETTERS

Lapping and polishing of additively manufactured 316L substrates and their effects on the microstructural evolution and adhesion of PVD CrAlN coatings

(2021) Wolfgang Tillmann et al.   SURFACE & COATINGS TECHNOLOGY

Influence of layer number on microstructure, mechanical properties and wear behavior of the TiN/Ti multilayer coatings fabricated by high-power magnetron sputtering deposition

(2021) Liyuan Sheng et al.   Journal of Manufacturing Processes

Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy

(2021) Jinlong Su et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Experimental investigation of sawing approach of low power fiber laser cutting of titanium alloy using particle swarm optimization technique

(2021) D. Pramanik et al.   OPTICS AND LASER TECHNOLOGY

Isothermal oxidation kinetics of nitrided Ti-6Al-4V studied by infrared emissivity

(2020) I. González de Arrieta et al.   CORROSION SCIENCE

Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment

(2020) Zhiyi Zou et al.   SCRIPTA MATERIALIA

Distribution control and formation mechanism of gas inclusions in directionally solidified Al2O3-Er3Al5O12-ZrO2 ternary eutectic ceramic by laser floating zone melting

(2020) Haijun Su et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening

(2020) Liang Lan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of process parameters on dimensional accuracy of machined Titanium (Ti-6Al-4V) alloy in Laser Beam Machining Process

(2020) T. Muthuramalingam et al.   OPTICS AND LASER TECHNOLOGY

Effect of TiN/Ti coating combined with laser shock peening pre-treatment on the fatigue strength of Ti-6Al-4V titanium alloy

(2020) Xin Cao et al.   SURFACE & COATINGS TECHNOLOGY

Surface quality measures analysis and optimization on machining titanium alloy using CO2 based laser beam drilling process

(2020) T. Muthuramalingam et al.   Journal of Manufacturing Processes

Oxygen effects on ω and α phase transformations in a metastable β Ti-Nb alloy

(2019) Kathleen Chou et al.   ACTA MATERIALIA

Shear deformation determined by short-range configuration of atoms in topologically close-packed crystal

(2019) Yongchao Zhang et al.   ACTA MATERIALIA

Coaxial waterjet-assisted laser drilling of film cooling holes in turbine blades

(2019) Y.Z. Liu   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Two-step approach to improving the quality of laser micro-hole drilling on thermal barrier coated nickel base alloys

(2019) Rujia Wang et al.   OPTICS AND LASERS IN ENGINEERING

Solid-state cold spraying of Ti and its alloys: A literature review

(2019) Wenya Li et al.   PROGRESS IN MATERIALS SCIENCE

Influence of Al 2 O 3 particle pinning on thermal stability of nanocrystalline Fe

(2018) G.B. Shan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process

(2018) Shaochuan Feng et al.   MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING

Elevated temperature tribology of Ni alloys under helium environment for nuclear reactor applications

(2018) Md Saifur Rahman et al.   TRIBOLOGY INTERNATIONAL

Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium

(2017) Hao Zhu et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effect of boron concentration on microstructures and properties of Fe–B–C alloy steel

(2017) Xiangyi Ren et al.   JOURNAL OF MATERIALS RESEARCH

Effects of annealing temperature and quenching medium on microstructure, mechanical properties as well as fatigue behavior of Ti-6Al-4V alloy

(2017) Navid Davari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics

(2017) Diaa Abidou et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Phase transformation behavior and kinetics of high Nb–TiAl alloy during continuous cooling

(2016) Ying Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Micro-EDM machinability of difficult-to-cut Ti-6Al-4V against soft brass

(2015) Mychal-Drew Moses et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

(2014) M. Simonelli et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy

(2013) Junzhan Hou et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

On the mechanics of chip formation in Ti–6Al–4V turning with spindle speed variation

(2013) Elio Chiappini et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures

(2013) Rosemar B. da Silva et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation on microstructure and wear behavior of the NiAl–TiC–Al2O3 composite fabricated by self-propagation high-temperature synthesis with extrusion

(2012) L.Y. Sheng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution and mechanical properties of Ni3Al/Al2O3 composite during self-propagation high-temperature synthesis and hot extrusion

(2012) L.Y. Sheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure evolution and elevated temperature compressive properties of a rapidly solidified NiAl–Cr(Nb)/Dy alloy

(2008) L.Y. Sheng et al.   MATERIALS & DESIGN