Deformation mechanisms in ultrafine-grained metals with an emphasis on the Hall–Petch relationship and strain rate sensitivity

Corrosion in Hank's Solution and Mechanical Strength of Ultrafine-Grained Pure Iron

(2020) Beatriz Araújo Batista et al.   ADVANCED ENGINEERING MATERIALS

Using High-Pressure Torsion to Achieve Superplasticity in an AZ91 Magnesium Alloy

(2020) Roberto B. Figueiredo et al.   Metals

Analysis of the creep behavior of fine-grained AZ31 magnesium alloy

(2020) Roberto B. Figueiredo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ductility and strain hardening in gradient and lamellar structured materials

(2020) Xiaolei Wu et al.   SCRIPTA MATERIALIA

Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding

(2019) Xiang CHEN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Design of Architectured Materials Based on Mechanically‐Driven Structural and Compositional Patterning

(2019) Yuri Estrin et al.   ADVANCED ENGINEERING MATERIALS

The Contribution of Severe Plastic Deformation to Research on Superplasticity

(2019) Megumi Kawasaki et al.   MATERIALS TRANSACTIONS

Strain Induced Segregations in Severely Deformed Materials

(2019) Xavier Sauvage et al.   MATERIALS TRANSACTIONS

Benefits of pattern formation by severe plastic deformation

(2019) R. Kulagin et al.   Applied Materials Today

On the Heterogeneity of Local Shear Strain Induced by High‐Pressure Torsion

(2019) Wei Jiang et al.   ADVANCED ENGINEERING MATERIALS

Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures

(2019) Yan Chong et al.   SCRIPTA MATERIALIA

Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

(2019) Jelena Horky et al.   Materials

Instabilities of interfaces between dissimilar metals induced by high pressure torsion

(2018) R. Kulagin et al.   MATERIALS LETTERS

Effects of homogenization time on aging behavior and mechanical properties of AZ91 alloy

(2018) Jong Un Lee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving ultra-high hardness of nanostructured Mg-8.2Gd-3.2Y-1.0Zn-0.4Zr alloy produced by a combination of high pressure torsion and ageing treatment

(2018) W.T. Sun et al.   SCRIPTA MATERIALIA

Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes

(2018) Y.Z. Tian et al.   SCRIPTA MATERIALIA

Transition from poor ductility to room-temperature superplasticity in a nanostructured aluminum alloy

(2018) Kaveh Edalati et al.   Scientific Reports

High-pressure torsion of iron with various purity levels and validation of Hall-Petch strengthening mechanism

(2018) Robert Tejedor et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Analysis of the micro and substructural evolution during severe plastic deformation of ARMCO iron and consequences in mechanical properties

(2018) Jairo Alberto Muñoz et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion

(2018) Yi Huang et al.   ACTA MATERIALIA

Effect of homogenization on the microstructure and mechanical properties of the repetitive-upsetting processed AZ91D alloy

(2017) Li Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate

(2017) Pedro Henrique R. Pereira et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Super-formable pure magnesium at room temperature

(2017) Zhuoran Zeng et al.   Nature Communications

Achieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing

(2017) Roberto B. Figueiredo et al.   Journal of Materials Research and Technology-JMR&T

Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy

(2017) Kaveh Edalati et al.   Scientific Reports

Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing

(2016) Soroosh Naghdy et al.   MATERIALS CHARACTERIZATION

On the creep transition from superplastic behavior to nanocrystalline behavior

(2016) Farghalli A. Mohamed   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural development during equal channel angular pressing of as-cast AZ91 alloy

(2016) S. Khani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluation of mechanical and metallurgical properties of AZ91 seamless tubes produced by radial-forward extrusion method

(2016) S.S. Jamali et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Strength–Grain Size Relationship in Ultrafine-Grained Metals

(2016) N. Balasubramanian et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Interfacial segregation induced by severe plastic deformation in a Mg–Zn–Y alloy

(2016) Dudekula Althaf Basha et al.   SCRIPTA MATERIALIA

Nanocrystalline steel obtained by mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion

(2015) Christine Borchers et al.   ACTA MATERIALIA

The Requirements for Superplasticity with an Emphasis on Magnesium Alloys

(2015) Megumi Kawasaki et al.   ADVANCED ENGINEERING MATERIALS

Achieving room temperature superplasticity in Zn–5Al alloy at high strain rates by equal-channel angular extrusion

(2015) M. Demirtas et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Review: achieving superplastic properties in ultrafine-grained materials at high temperatures

(2015) Megumi Kawasaki et al.   JOURNAL OF MATERIALS SCIENCE

The influence of grain size and strain rate on the mechanical behavior of pure magnesium

(2015) Roberto B. Figueiredo et al.   JOURNAL OF MATERIALS SCIENCE

Microhardness, microstructure and tensile behavior of an AZ31 magnesium alloy processed by high-pressure torsion

(2015) Jie Xu et al.   JOURNAL OF MATERIALS SCIENCE

Microstructure and microhardness of OFHC copper processed by high-pressure torsion

(2015) Abdulla I. Almazrouee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn–0.3Al alloy

(2015) M. Demirtas et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fundamentals of Superior Properties in Bulk NanoSPD Materials

(2015) R.Z. Valiev et al.   Materials Research Letters

Grain size and microhardness evolution during annealing of a magnesium alloy processed by high-pressure torsion

(2015) Livia Raquel C. Malheiros et al.   Journal of Materials Research and Technology-JMR&T

Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al–Mg alloy

(2014) X. Sauvage et al.   ACTA MATERIALIA

Grain Boundary Phenomena in an Ultrafine-Grained Al-Zn Alloy with Improved Mechanical Behavior for Micro-Devices

(2014) Nguyen Q. Chinh et al.   ADVANCED ENGINEERING MATERIALS

An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion

(2014) Yi Huang et al.   JOURNAL OF MATERIALS SCIENCE

Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion

(2014) Yi Huang et al.   JOURNAL OF MATERIALS SCIENCE

Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing

(2014) Roberto B. Figueiredo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of pure metals: Investigation using high-pressure torsion

(2014) Kaveh Edalati et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hall–Petch Breakdown in Fine-Grained Pure Magnesium at Low Strain Rates

(2014) Hidetoshi Somekawa et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement

(2013) Terence G. Langdon   ACTA MATERIALIA

Influence of Anvil Alignment on Shearing Patterns in High-Pressure Torsion

(2013) Yi Huang et al.   ADVANCED ENGINEERING MATERIALS

Tribology testing of ultrafine-grained Ti processed by high-pressure torsion with subsequent coating

(2013) Chuan Ting Wang et al.   JOURNAL OF MATERIALS SCIENCE

On the minimum grain size obtainable by equal channel angular pressing

(2013) Farghalli A. Mohamed et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluating the Superplastic Flow of a Magnesium AZ31 Alloy Processed by Equal-Channel Angular Pressing

(2013) Roberto B. Figueiredo et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion

(2012) Yi Huang et al.   JOURNAL OF MATERIALS SCIENCE

Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling

(2012) Vitor L. Sordi et al.   JOURNAL OF MATERIALS SCIENCE

On the minimum grain size obtainable by high-pressure torsion

(2012) Farghalli A. Mohamed et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain rate sensitivity studies in an ultrafine-grained Al–30wt.% Zn alloy using micro- and nanoindentation

(2012) Nguyen Q. Chinh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena

(2012) X. Sauvage et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of initial grain size and temperature on the tensile properties of magnesium alloy AZ31 sheet

(2012) D.L. Atwell et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A modified Hall–Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing

(2012) P. Luo et al.   SCRIPTA MATERIALIA

Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion

(2012) Chuan Ting Wang et al.   WEAR

Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing

(2011) Sergiy V. Divinski et al.   ACTA MATERIALIA

High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness

(2011) Kaveh Edalati et al.   ACTA MATERIALIA

Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution

(2011) Y. Cao et al.   ACTA MATERIALIA

Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity

(2011) Megumi Kawasaki et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion

(2011) Kaveh Edalati et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and hardness of copper–carbon nanotube composites consolidated by High Pressure Torsion

(2011) P. Jenei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature

(2011) Yue Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of oxide particles on the stabilization and final microstructure in aluminium

(2011) Andrea Bachmaier et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature

(2011) Jizhong Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-pressure torsion of pure magnesium: Evolution of mechanical properties, microstructures and hydrogen storage capacity with equivalent strain

(2011) Kaveh Edalati et al.   SCRIPTA MATERIALIA

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

(2010) H.W. Zhang et al.   ACTA MATERIALIA

Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion

(2010) Y. Cao et al.   JOURNAL OF MATERIALS SCIENCE

The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study

(2010) A. Hohenwarter et al.   JOURNAL OF MATERIALS SCIENCE

Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP

(2010) Roberto B. Figueiredo et al.   JOURNAL OF MATERIALS SCIENCE

Mechanical behavior and microstructural evolution of commercially pure titanium in enhanced multi-pass equal channel angular pressing and cold extrusion

(2010) Dong-Hwan Kang et al.   MATERIALS & DESIGN

The processing of pure titanium through multiple passes of ECAP at room temperature

(2010) Xicheng Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural stability of Cu processed by different routes of severe plastic deformation

(2010) J. Gubicza et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium

(2010) G. Purcek et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

(2010) I. Sabirov et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Evolution of microstructural homogeneity in copper processed by high-pressure torsion

(2010) X.H. An et al.   SCRIPTA MATERIALIA

On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation

(2010) R.Z. Valiev et al.   SCRIPTA MATERIALIA

Segregation of solute elements at grain boundaries in an ultrafine grained Al–Zn–Mg–Cu alloy

(2010) Gang Sha et al.   ULTRAMICROSCOPY

Microstructural evolution in a two-phase alloy processed by high-pressure torsion

(2009) Megumi Kawasaki et al.   ACTA MATERIALIA

A visualization of shear strain in processing by high-pressure torsion

(2009) Y. Cao et al.   JOURNAL OF MATERIALS SCIENCE

Seventy-five years of superplasticity: historic developments and new opportunities

(2009) Terence G. Langdon   JOURNAL OF MATERIALS SCIENCE

Deformation Mechanisms in Nanocrystalline Materials

(2009) Farghalli A. Mohamed et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing

(2009) Roberto B. Figueiredo et al.   SCRIPTA MATERIALIA

Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging

(2009) W.J. Kim et al.   SCRIPTA MATERIALIA

New procedure to generate stable nanocrystallites by severe plastic deformation

(2009) A. Bachmaier et al.   SCRIPTA MATERIALIA

An evaluation of microstructure and microhardness in copper subjected to ultra-high strains

(2008) A. P. Zhilyaev et al.   JOURNAL OF MATERIALS SCIENCE

Developing superplasticity in a magnesium AZ31 alloy by ECAP

(2008) Roberto B. Figueiredo et al.   JOURNAL OF MATERIALS SCIENCE

Evolution of Mechanical Properties and Microstructures with Equivalent Strain in Pure Fe Processed by High Pressure Torsion

(2008) Kaveh Edalati et al.   MATERIALS TRANSACTIONS

Microstructure and properties of pure titanium processed by equal-channel angular pressing at room temperature

(2008) Xicheng Zhao et al.   SCRIPTA MATERIALIA

Influence of post-deformation on CP-Ti processed by equal channel angular pressing

(2007) V.V. Stolyarov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation

(2007) Daria Setman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Equal-channel angular pressing of magnesium alloy AZ91 and its effects on microstructure and mechanical properties

(2007) Bin Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING