State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
出版年份 2019 全文链接
标题
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
作者
关键词
-
出版物
Coatings
Volume 9, Issue 7, Pages 418
出版商
MDPI AG
发表日期
2019-07-01
DOI
10.3390/coatings9070418
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
- (2019) Sarah J. Wolff et al. Scientific Reports
- Direct Energy Deposition - Laser Additive Manufacturing of Titanium-Molybdenum alloy: Parametric studies, microstructure and mechanical properties
- (2019) Tarun Bhardwaj et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser additive manufacturing of compositionally graded AlCrFeMoVx (x = 0 to 1) high-entropy alloy system
- (2019) Bharat Gwalani et al. OPTICS AND LASER TECHNOLOGY
- Room and elevated temperature sliding wear behavior and mechanisms of additively manufactured novel precipitation strengthened metallic composites
- (2019) T.B. Torgerson et al. WEAR
- Introduction to the design rules for Metal Big Area Additive Manufacturing
- (2019) Clayton Greer et al. Additive Manufacturing
- Ultrasonic vibration-assisted laser engineering net shaping of ZrO 2 -Al 2 O 3 bulk parts: Effects on crack suppression, microstructure, and mechanical properties
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- Effect of ultrasonic power on forming quality of nano-sized Al 2 O 3 -ZrO 2 eutectic ceramic via laser engineered net shaping (LENS)
- (2018) Shuai Yan et al. CERAMICS INTERNATIONAL
- Predictive modeling capabilities from incident powder and laser to mechanical properties for laser directed energy deposition
- (2018) Yung C. Shin et al. COMPUTATIONAL MECHANICS
- Additive manufacturing by means of laser-aided directed metal deposition of titanium wire
- (2018) Fabrizia Caiazzo INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of powder additive manufacturing processes for metallic biomaterials
- (2018) W.S.W. Harun et al. POWDER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis
- (2018) Jie Song et al. MATERIALS & DESIGN
- Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
- (2018) J.R. Hönnige et al. MATERIALS & DESIGN
- Additive manufacturing of compositionally gradient metal-ceramic structures: Stainless steel to vanadium carbide
- (2018) Thomas Gualtieri et al. MATERIALS & DESIGN
- Adiabatic shear instability is not necessary for adhesion in cold spray
- (2018) Mostafa Hassani-Gangaraj et al. ACTA MATERIALIA
- Corrosion Characteristics of Laser-Engineered Net Shaping Additively-Manufactured 316L Stainless Steel
- (2018) Jamie A. Stull et al. JOM
- Influence of simultaneous addition of carbon nanotubes and calcium phosphate on wear resistance of 3D-printed Ti6Al4V
- (2018) Kevin Stenberg et al. JOURNAL OF MATERIALS RESEARCH
- Microstructure evolution during laser direct energy deposition of a novel Fe-Cr-Ni-W-B hardfacing coating
- (2018) Niyanth Sridharan et al. SURFACE & COATINGS TECHNOLOGY
- Compositionally graded doped hydroxyapatite coating on titanium using laser and plasma spray deposition for bone implants
- (2018) Dongxu Ke et al. Acta Biomaterialia
- A new physics-based model for laser directed energy deposition (powder-fed additive manufacturing): From single-track to multi-track and multi-layer
- (2018) Yuze Huang et al. OPTICS AND LASER TECHNOLOGY
- Revealing internal flow behaviour in arc welding and additive manufacturing of metals
- (2018) Lee Aucott et al. Nature Communications
- The Hardness of Additively Manufactured Alloys
- (2018) J.S. Zuback et al. Materials
- Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations
- (2018) Magdalena Cortina et al. Materials
- Effect of processing conditions on the microstructure, porosity, and mechanical properties of Ti-6Al-4V repair fabricated by directed energy deposition
- (2018) Nathan A. Kistler et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
- (2018) C. Buchanan et al. ENGINEERING STRUCTURES
- Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate
- (2018) Dongjiang Wu et al. CERAMICS INTERNATIONAL
- Effect of laser energy density on defects behavior of direct laser depositing 24CrNiMo alloy steel
- (2018) Lin Cao et al. OPTICS AND LASER TECHNOLOGY
- Laser directed energy deposition of water-atomized iron powder: Process optimization and microstructure of single-tracks
- (2018) Mohammad Ansari et al. OPTICS AND LASER TECHNOLOGY
- Dimensionless numbers in additive manufacturing
- (2017) T. Mukherjee et al. JOURNAL OF APPLIED PHYSICS
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Building digital twins of 3D printing machines
- (2017) T. DebRoy et al. SCRIPTA MATERIALIA
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- Arc-based additive manufacturing of steel components—comparison of wire- and powder-based variants
- (2017) K. Hoefer et al. Welding in the World
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V
- (2017) Ross Cunningham et al. Materials Research Letters
- Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
- (2017) Zhuqing Wang et al. MATERIALS & DESIGN
- Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
- (2016) Meurig Thomas et al. ACTA MATERIALIA
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping
- (2016) Yuwei Zhai et al. INTERNATIONAL JOURNAL OF FATIGUE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring
- (2016) Garrett J. Marshall et al. JOM
- Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates
- (2016) Jun Cao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Processing window development for laser cladding of zirconium on zirconium alloy
- (2016) Arshad Harooni et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Calcium phosphate–titanium composites for articulating surfaces of load-bearing implants
- (2016) Amit Bandyopadhyay et al. Journal of the Mechanical Behavior of Biomedical Materials
- An empirical-statistical model for coaxial laser cladding of NiCrAlY powder on Inconel 738 superalloy
- (2016) M. Ansari et al. OPTICS AND LASER TECHNOLOGY
- Combinatorial Alloy Design by Laser Additive Manufacturing
- (2016) Helene Knoll et al. STEEL RESEARCH INTERNATIONAL
- Tribological, electrochemical and in vitro biocompatibility properties of SiC reinforced composite coatings
- (2016) Mitun Das et al. MATERIALS & DESIGN
- Application of Biomaterials in Cardiac Repair and Regeneration
- (2016) Zhi Cui et al. Engineering
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Additive manufacturing of Ti-Si-N ceramic coatings on titanium
- (2015) Yanning Zhang et al. APPLIED SURFACE SCIENCE
- Additive manufacturing of ceramic structures by laser engineered net shaping
- (2015) Fangyong Niu et al. Chinese Journal of Mechanical Engineering
- Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
- (2015) Linkan Bian et al. JOM
- Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
- (2015) Allison M. Beese et al. JOM
- Microstructure and corrosion behavior of laser processed NiTi alloy
- (2015) Jithin J. Marattukalam et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition
- (2015) Ramesh Raju et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
- (2015) A. W. Prabhu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Nanosized microstructure of Al2O3–ZrO2 (Y2O3) eutectics fabricated by laser engineered net shaping
- (2015) Fangyong Niu et al. SCRIPTA MATERIALIA
- Semi-empirical model of deposit size and porosity in 420 stainless steel and 4140 steel using laser engineered net shaping
- (2015) J.B. Ferguson et al. Journal of Manufacturing Processes
- Investigation of effect of process parameters on multilayer builds by direct metal deposition
- (2014) Tarak Amine et al. APPLIED THERMAL ENGINEERING
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- Heat transfer and fluid flow in additive manufacturing
- (2014) A. Raghavan et al. JOURNAL OF LASER APPLICATIONS
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
- (2014) H. Khalid Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Power prediction for laser engineered net shaping of Al2O3 ceramic parts
- (2014) Fangyong Niu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
- (2014) V. Manvatkar et al. MATERIALS SCIENCE AND TECHNOLOGY
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser
- (2014) Parisa Farahmand et al. OPTICS AND LASER TECHNOLOGY
- Improvement of strategies and parameters for multi-axis laser cladding operations
- (2014) A. Calleja et al. OPTICS AND LASERS IN ENGINEERING
- Cold spray coating: review of material systems and future perspectives
- (2014) A. Moridi et al. SURFACE ENGINEERING
- Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
- (2014) Douglas C. Hofmann et al. Scientific Reports
- In situ synthesized TiB–TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility
- (2013) Mitun Das et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fabrication of Biomedical Implants using Laser Engineered Net Shaping (LENS™)
- (2013) Mitun Das et al. Transactions of the Indian Ceramic Society
- Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process
- (2012) Ruifeng Li et al. APPLIED SURFACE SCIENCE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
- (2012) Almir Heralić et al. OPTICS AND LASERS IN ENGINEERING
- Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd:YAG laser
- (2012) Yuwen Sun et al. OPTICS AND LASERS IN ENGINEERING
- Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications
- (2012) T. Baldridge et al. OPTICS AND LASERS IN ENGINEERING
- Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes
- (2011) M. Naveed Ahsan et al. JOURNAL OF LASER APPLICATIONS
- Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
- (2011) Mari Koike et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanics and energy analysis on molten pool spreading during laser solid forming
- (2010) Jun Yu et al. APPLIED SURFACE SCIENCE
- FEM modeling and experimental verification for dilution control in laser cladding
- (2010) J.T. Hofman et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Integrated Sustainable Life Cycle Design: A Review
- (2010) Karthik Ramani et al. JOURNAL OF MECHANICAL DESIGN
- Direct laser processing of bulk lead zirconate titanate ceramics
- (2010) Sheldon A. Bernard et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
- (2010) Baolong Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Modeling of Heat Transfer and Fluid Flow in the Laser Multilayered Cladding Process
- (2010) Fanrong Kong et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Fabrication of compositionally and structurally graded Ti–TiO2 structures using laser engineered net shaping (LENS)
- (2009) Vamsi Krishna Balla et al. Acta Biomaterialia
- Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization
- (2008) Shengfeng Zhou et al. APPLIED SURFACE SCIENCE
- Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis
- (2008) Fujun Wang et al. APPLIED SURFACE SCIENCE
- Application of dimensional analysis to selective laser melting
- (2008) Maarten van Elsen et al. RAPID PROTOTYPING JOURNAL
- Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants
- (2007) Mangal Roy et al. Acta Biomaterialia
- Research on molten pool temperature in the process of laser rapid forming
- (2007) Tan Hua et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now