Additive-manufactured sensors for biofuel analysis: copper determination in bioethanol using a 3D-printed carbon black/polylactic electrode

Electrolysis Activation of Fused Filament Fabrication 3D Printed Electrodes for Electrochemical and Spectroelectrochemical Analysis

(2019) Denise M Wirth et al.   ANALYTICAL CHEMISTRY

Salivary diagnostics on paper microfluidic devices and their use as wearable sensors for glucose monitoring

(2019) Lucas F. de Castro et al.   ANALYTICAL AND BIOANALYTICAL CHEMISTRY

Iron (III) determination in bioethanol fuel using a smartphone-based device

(2019) Afonso Filipe João et al.   MICROCHEMICAL JOURNAL

3D-printed Ag/AgCl pseudo-reference electrodes

(2019) Nasuha Rohaizad et al.   ELECTROCHEMISTRY COMMUNICATIONS

Single-step fabrication of an integrated 3D-printed device for electrochemical sensing applications

(2019) Vassiliki Katseli et al.   ELECTROCHEMISTRY COMMUNICATIONS

3D Printed Graphene Electrodes Modified with Prussian Blue: Emerging Electrochemical Sensing Platform for Peroxide Detection

(2019) Vera Katic et al.   ACS Applied Materials & Interfaces

Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform

(2019) Eduardo M. Richter et al.   ANALYTICAL CHEMISTRY

Comparison of real-world vehicle fuel use and tailpipe emissions for gasoline-ethanol fuel blends

(2019) Weichang Yuan et al.   FUEL

3D-printed flexible device combining sampling and detection of explosives

(2019) Rafael M. Cardoso et al.   SENSORS AND ACTUATORS B-CHEMICAL

Voltammetric determination of copper and tert-butylhydroquinone in biodiesel: A rapid quality control protocol

(2019) André L. Squissato et al.   TALANTA

3D printing nanocomposite gel-based thick electrode enabling both high areal capacity and rate performance for lithium-ion battery

(2019) Chuang Sun et al.   CHEMICAL ENGINEERING JOURNAL

3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids

(2019) Rafael M. Cardoso et al.   SENSORS AND ACTUATORS B-CHEMICAL

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

(2018) Rafael M. Cardoso et al.   ANALYTICA CHIMICA ACTA

A diamond/graphite nanoplatelets electrode for anodic stripping voltammetric trace determination of Zn(II), Cd(II), Pb(II) and Cu(II)

(2018) Zhaofeng Zhai et al.   APPLIED SURFACE SCIENCE

Determination of Pb, Cu and Fe in ethanol fuel samples by high-resolution continuum source electrothermal atomic absorption spectrometry by exploring a combination of sequential and simultaneous strategies

(2018) Jorge S. Almeida et al.   MICROCHEMICAL JOURNAL

Anodic stripping voltammetric determination of zinc at a 3-D printed carbon nanofiber–graphite–polystyrene electrode using a carbon pseudo-reference electrode

(2018) Kevin C. Honeychurch et al.   SENSORS AND ACTUATORS B-CHEMICAL

The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes

(2018) Hairul Hisham Bin Hamzah et al.   Scientific Reports

3D printable conductive materials for the fabrication of electrochemical sensors: A mini review

(2018) Hairul Hisham Hamzah et al.   ELECTROCHEMISTRY COMMUNICATIONS

In situ electrochemical determination of free Cu(II) ions in biodiesel using screen-printed electrodes: Direct correlation with oxidation stability

(2018) André L. Squissato et al.   FUEL

Screen-printed electrodes for quality control of liquid (Bio)fuels

(2018) André L. Squissato et al.   TRAC-TRENDS IN ANALYTICAL CHEMISTRY

3D Printed Graphene Electrodes’ Electrochemical Activation

(2018) Michelle P. Browne et al.   ACS Applied Materials & Interfaces

3D printed microfluidic devices with immunoaffinity monoliths for extraction of preterm birth biomarkers

(2018) Ellen K. Parker et al.   ANALYTICAL AND BIOANALYTICAL CHEMISTRY

Evaluation of graphite sheets for production of high-quality disposable sensors

(2018) Luiz André Juvêncio Silva et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets

(2018) Pãmyla L. dos Santos et al.   SENSORS AND ACTUATORS B-CHEMICAL

3D-printed flow system for determination of lead in natural waters

(2017) Elodie Mattio et al.   TALANTA

3D-printing technologies for electrochemical applications

(2016) Adriano Ambrosi et al.   CHEMICAL SOCIETY REVIEWS

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

(2016) Yong He et al.   ELECTROANALYSIS

Electrode Based on Nickel-containing SBA-15 for the Determination of Copper in Ethanol Biofuel

(2015) Sakae Y. Neto et al.   ELECTROANALYSIS

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

(2015) Omar A. Mohamed et al.   Advances in Manufacturing

On-site fuel electroanalysis: Determination of lead, copper and mercury in fuel bioethanol by anodic stripping voltammetry using screen-printed gold electrodes

(2014) Eduardo S. Almeida et al.   ANALYTICA CHIMICA ACTA

Stripping voltammetric determination of manganese in bioethanol

(2014) Fernanda F. Lima et al.   MICROCHEMICAL JOURNAL

Batch-injection stripping voltammetry of metals in fuel bioethanol

(2013) Thiago F. Tormin et al.   FUEL

A novel graphite–polyurethane composite electrode modified with thiol-organofunctionalized silica for the determination of copper ions in ethanol fuel

(2009) Ivana Cesarino et al.   FUEL

Copper determination in ethanol fuel samples by anodic stripping voltammetry at a gold microelectrode

(2008) Regina M. Takeuchi et al.   MICROCHIMICA ACTA