标题
Laser melting modes in metal powder bed fusion additive manufacturing
作者
关键词
-
出版物
REVIEWS OF MODERN PHYSICS
Volume 94, Issue 4, Pages -
出版商
American Physical Society (APS)
发表日期
2022-10-21
DOI
10.1103/revmodphys.94.045002
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Defects and anomalies in powder bed fusion metal additive manufacturing
- (2022) Amir Mostafaei et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- The interplay between vapour, liquid, and solid phases in laser powder bed fusion
- (2022) I. Bitharas et al. Nature Communications
- Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing
- (2022) Yuze Huang et al. Nature Communications
- Quantitative study on the dynamics of melt pool and keyhole and their controlling factors in metal laser melting
- (2022) Ming Wei et al. Additive Manufacturing
- <italic>Operando</italic> monitoring microstructures and defects in laser fusion additive manufacturing of metals
- (2022) Cang Zhao et al. Kexue Tongbao/Chinese Science Bulletin
- Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks
- (2021) Qiming Zhu et al. COMPUTATIONAL MECHANICS
- Keyhole mode induced simultaneous improvement in strength and ductility of Sc modified Al-Mn alloy manufactured by selective laser melting
- (2021) Jinglin Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy
- (2021) Aiden A. Martin et al. Applied Materials Today
- Universal scaling laws of keyhole stability and porosity in 3D printing of metals
- (2021) Zhengtao Gan et al. Nature Communications
- Evaluation of pore re-opening after HIP in LPBF Ti–6Al–4V
- (2021) Topi Kosonen et al. POWDER METALLURGY
- Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
- (2021) S.L. Sing et al. PROGRESS IN MATERIALS SCIENCE
- Material-structure-performance integrated laser-metal additive manufacturing
- (2021) Dongdong Gu et al. SCIENCE
- A critical look at the prediction of the temperature field around a laser-induced melt pool on metallic substrates
- (2021) Yi Shu et al. Scientific Reports
- The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing
- (2021) Brian J. Simonds et al. Applied Materials Today
- Laser-based powder bed fusion additive manufacturing of pure copper
- (2021) Suraj Dinkar Jadhav et al. Additive Manufacturing
- Resolution and geometric limitations in laser powder bed fusion additively manufactured GRCop-84 structures for a lower hybrid current drive launcher
- (2021) A.H. Seltzman et al. FUSION ENGINEERING AND DESIGN
- In situ characterization of laser-generated melt pools using synchronized ultrasound and high-speed X-ray imaging
- (2021) Jared Gillespie et al. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA
- In situ absorption synchrotron measurements, predictive modeling, microstructural analysis, and scanning probe measurements of laser melted Ti-6Al-4V single tracks for additive manufacturing applications
- (2021) Nicholas Derimow et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing
- (2020) Vivek Thampy et al. Scientific Reports
- Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing
- (2020) P. Agrawal et al. Additive Manufacturing
- Precise Measurements of Thermophysical Properties of Liquid Ti–6Al–4V (Ti64) Alloy On Board the International Space Station
- (2020) Markus Mohr et al. ADVANCED ENGINEERING MATERIALS
- Closing the science gap in 3D metal printing
- (2020) Andrew T. Polonsky et al. SCIENCE
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- Metal 3D printing as a disruptive technology for superalloys
- (2020) Chinnapat Panwisawas et al. Nature Communications
- Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: a correlation between in situ pyrometry and ex situ X-ray radiography
- (2020) Jean-Baptiste Forien et al. Additive Manufacturing
- Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process
- (2020) Ziheng Wu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Helium bubble nucleation in Laser Powder Bed Fusion processed 304L stainless steel
- (2020) Juan Hou et al. JOURNAL OF NUCLEAR MATERIALS
- Energy-Coupling Mechanisms Revealed through Simultaneous Keyhole Depth and Absorptance Measurements during Laser-Metal Processing
- (2020) Troy R. Allen et al. Physical Review Applied
- An Experimental Approach for the Direct Measurement of Temperatures in the Vicinity of the Keyhole Front Wall during Deep-Penetration Laser Welding
- (2020) Ronald Pordzik et al. Applied Sciences-Basel
- The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures
- (2020) Y.N. Hu et al. MATERIALS & DESIGN
- Design and Tailoring of Alloys for Additive Manufacturing
- (2020) T. M. Pollock et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
- (2020) Niloofar Sanaei et al. PROGRESS IN MATERIALS SCIENCE
- Controlling grain nucleation and morphology by laser beam shaping in metal additive manufacturing
- (2020) Tien T. Roehling et al. MATERIALS & DESIGN
- Grain structure evolution in transition-mode melting in direct energy deposition
- (2020) Dong-Rong Liu et al. MATERIALS & DESIGN
- Metallurgy, mechanistic models and machine learning in metal printing
- (2020) T. DebRoy et al. Nature Reviews Materials
- In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing
- (2020) Yunhui Chen et al. Applied Materials Today
- Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging
- (2020) Xuxiao Li et al. Additive Manufacturing
- Hybrid directed energy deposition for fabricating metal structures with embedded sensors
- (2020) Michael Juhasz et al. Additive Manufacturing
- New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion
- (2020) Thomas Voisin et al. ACTA MATERIALIA
- A conservative level set method on unstructured meshes for modeling multiphase thermo-fluid flow in additive manufacturing processes
- (2020) Stephen Lin et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Axial force radiometer for primary standard laser power measurements using photon momentum
- (2020) Paul A Williams et al. METROLOGIA
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- Evaporation Model for Keyhole Dynamics During Additive Manufacturing of Metal
- (2020) Lu Wang et al. Physical Review Applied
- Data-driven characterization of thermal models for powder-bed-fusion additive manufacturing
- (2020) Wentao Yan et al. Additive Manufacturing
- Invited Review Article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing
- (2020) Zackary Snow et al. Additive Manufacturing
- Defect structure process maps for laser powder bed fusion additive manufacturing
- (2020) Jerard V. Gordon et al. Additive Manufacturing
- A critical insight into lack-of-fusion pore structures in additively manufactured stainless steel
- (2020) Majid Laleh et al. Additive Manufacturing
- Layer-wise engineering of grain orientation (LEGO) in laser powder bed fusion of stainless steel 316L
- (2020) Karl A. Sofinowski et al. Additive Manufacturing
- Predictive analytical modelling and experimental validation of processing maps in additive manufacturing of nitinol alloys
- (2020) Jia-Ning Zhu et al. Additive Manufacturing
- In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
- (2019) Sarah J. Wolff et al. Scientific Reports
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing
- (2019) Jianchao Ye et al. ADVANCED ENGINEERING MATERIALS
- Dynamics of pore formation during laser powder bed fusion additive manufacturing
- (2019) Aiden A. Martin et al. Nature Communications
- Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
- (2019) Andrew M. Kiss et al. ADVANCED ENGINEERING MATERIALS
- Geometrical metrology for metal additive manufacturing
- (2019) R.K. Leach et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Pore elimination mechanisms during 3D printing of metals
- (2019) S. Mohammad H. Hojjatzadeh et al. Nature Communications
- Bulk-Explosion-Induced Metal Spattering During Laser Processing
- (2019) Cang Zhao et al. Physical Review X
- Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
- (2019) Nadia Kouraytem et al. Physical Review Applied
- Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission
- (2019) Sergey A. Shevchik et al. IEEE Transactions on Industrial Informatics
- In-Process monitoring of porosity during laser additive manufacturing process
- (2019) Bin Zhang et al. Additive Manufacturing
- Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation
- (2019) Mohamad Bayat et al. Additive Manufacturing
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Operando X-ray diffraction during laser 3D printing
- (2019) Samy Hocine et al. Materials Today
- Melt pool geometry and morphology variability for the Inconel 718 alloy in a laser powder bed fusion additive manufacturing process
- (2019) Luke Scime et al. Additive Manufacturing
- Solidification-driven orientation gradients in additively manufactured stainless steel
- (2019) Andrew T. Polonsky et al. ACTA MATERIALIA
- SLM lattice structures: Properties, performance, applications and challenges
- (2019) Tobias Maconachie et al. MATERIALS & DESIGN
- A review of critical repeatability and reproducibility issues in powder bed fusion
- (2019) L. Dowling et al. MATERIALS & DESIGN
- Simulation of melt pool behaviour during additive manufacturing: Underlying physics and progress
- (2019) Peter S. Cook et al. Additive Manufacturing
- Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy
- (2019) Salah Eddine Brika et al. Additive Manufacturing
- Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion
- (2019) Christian Tenbrock et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
- (2018) Qilin Guo et al. ACTA MATERIALIA
- Fluid and particle dynamics in laser powder bed fusion
- (2018) P. Bidare et al. ACTA MATERIALIA
- Liquid metals: fundamentals and applications in chemistry
- (2018) T. Daeneke et al. CHEMICAL SOCIETY REVIEWS
- Analysis and possible estimation of keyhole depths evolution, using laser operating parameters and material properties
- (2018) Remy Fabbro et al. JOURNAL OF LASER APPLICATIONS
- Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
- (2018) Nicholas P. Calta et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- X-ray phase contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy
- (2018) Masanori Miyagi et al. OPTICS EXPRESS
- Ultrafast X-ray imaging of laser–metal additive manufacturing processes
- (2018) Niranjan D. Parab et al. JOURNAL OF SYNCHROTRON RADIATION
- Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting
- (2018) Shi-Hai Sun et al. SCRIPTA MATERIALIA
- Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal
- (2018) Brian J. Simonds et al. Physical Review Applied
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- The effect of powder oxidation on defect formation in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. ACTA MATERIALIA
- Uncertainty quantification and management in additive manufacturing: current status, needs, and opportunities
- (2017) Zhen Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selective Laser Melting of Pure Copper
- (2017) Toshi-Taka Ikeshoji et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components
- (2017) Maurizio Iebba et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Portable, high-accuracy, non-absorbing laser power measurement at kilowatt levels by means of radiation pressure
- (2017) Paul Williams et al. OPTICS EXPRESS
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V
- (2017) Ross Cunningham et al. Materials Research Letters
- Is the energy density a reliable parameter for materials synthesis by selective laser melting?
- (2017) K. G. Prashanth et al. Materials Research Letters
- Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
- (2017) Ting Qi et al. MATERIALS & DESIGN
- In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
- (2017) Cang Zhao et al. Scientific Reports
- Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
- (2017) Sonny Ly et al. Scientific Reports
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Multiscale Modeling of Powder Bed–Based Additive Manufacturing
- (2016) Matthias Markl et al. Annual Review of Materials Research
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes
- (2016) Mahesh Mani et al. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
- (2016) Ross Cunningham et al. JOM
- Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing
- (2016) Mohammad H. Farshidianfar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
- (2016) Nesma T. Aboulkhair et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Multiprocess 3D printing for increasing component functionality
- (2016) E. MacDonald et al. SCIENCE
- Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design
- (2016) Andrew T. Gaynor et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
- (2016) Ali Foroozmehr et al. MATERIALS & DESIGN
- Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
- (2016) Jingjing Yang et al. MATERIALS & DESIGN
- Calculation of laser absorption by metal powders in additive manufacturing
- (2015) C. D. Boley et al. APPLIED OPTICS
- Costs, benefits, and adoption of additive manufacturing: a supply chain perspective
- (2015) Douglas Thomas INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metrology Needs for Metal Additive Manufacturing Powders
- (2015) John A. Slotwinski et al. JOM
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
- (2015) Swee Leong Sing et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- Simultaneous X-ray diffraction and phase-contrast imaging for investigating material deformation mechanisms during high-rate loading
- (2015) M. Hudspeth et al. JOURNAL OF SYNCHROTRON RADIATION
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Temperature-dependent 780-nm laser absorption by engineering grade aluminum, titanium, and steel alloy surfaces
- (2014) Alexander M. Rubenchik et al. OPTICAL ENGINEERING
- Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
- (2013) I. Yadroitsev et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation
- (2013) Wenda Tan et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Interaction time and beam diameter effects on the conduction mode limit
- (2012) Eurico Assuncao et al. OPTICS AND LASERS IN ENGINEERING
- Additive manufacturing: rapid prototyping comes of age
- (2012) Ian Campbell et al. RAPID PROTOTYPING JOURNAL
- Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera
- (2012) M. Doubenskaia et al. SURFACE & COATINGS TECHNOLOGY
- Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure
- (2011) Koji Hirano et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Modeling of humps formation during deep-penetration laser welding
- (2010) E. H. Amara et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Thermocapillary actuation by optimized resistor pattern: bubbles and droplets displacing, switching and trapping
- (2010) Bertrand Selva et al. LAB ON A CHIP
- Time-resolved analysis of cavitation induced by CW lasers in absorbing liquids
- (2010) J.C. Ramirez-San-Juan et al. OPTICS EXPRESS
- A pragmatic model for selective laser melting with evaporation
- (2009) F. Verhaeghe et al. ACTA MATERIALIA
- Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry
- (2008) Yujie Wang et al. Nature Physics
- Ultrafast X-Ray Phase-Contrast Imaging of the Initial Coalescence Phase of Two Water Droplets
- (2008) Kamel Fezzaa et al. PHYSICAL REVIEW LETTERS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More