Application of response surface methodology in the optimization of photocatalytic removal of environmental pollutants using nanocatalysts

Optimization of Cr(VI) reduction by zero-valent bimetallic nanoparticles using the response surface modeling approach

(2011) Kunwar P. Singh et al.   DESALINATION

Central Composite Design Optimization of Biological Dye Removal in the Presence of Macroalgae Chara sp.

(2010) Ali R. Khataee et al.   CLEAN-Soil Air Water

Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode

(2010) Ali R. Khataee et al.   DESALINATION

Reductive removal of Cr(VI) by starch-stabilized Fe0 nanoparticles in aqueous solution

(2010) L. Alidokht et al.   DESALINATION

Photocatalytic degradation of an anthraquinone dye on immobilized TiO2 nanoparticles in a rectangular reactor: Destruction pathway and response surface approach

(2010) A.R. Khataee et al.   DESALINATION

Optimization of process parameters for electrochemical nitrate removal using Box–Behnken design

(2010) Miao Li et al.   ELECTROCHIMICA ACTA

Bleaching of Congo red in the presence of ZnS nanoparticles, with dopant of Co2+ion, as photocatalyst under UV and sunlight irradiations

(2010) H.R. Pouretedal et al.   ENVIRONMENTAL TECHNOLOGY

Central Composite Design for the Modeling of the Phenol Adsorption Process in a Fixed-Bed Reactor

(2010) F. Oughlis-Hammache et al.   JOURNAL OF CHEMICAL AND ENGINEERING DATA

Photocatalytic treatment of a dye solution using immobilized TiO2 nanoparticles combined with photoelectro-Fenton process: Optimization of operational parameters

(2010) Ali R. Khataee et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Optimization of parameters on photocatalytic degradation of chloramphenicol using TiO2 as photocatalyist by response surface methodology

(2010) Junwei Zhang et al.   JOURNAL OF ENVIRONMENTAL SCIENCES

Optimization of photocatalytic treatment of dye solution on supported TiO2 nanoparticles by central composite design: Intermediates identification

(2010) A.R. Khataee et al.   JOURNAL OF HAZARDOUS MATERIALS

Photocatalytic degradation of organic dyes in the presence of nanostructured titanium dioxide: Influence of the chemical structure of dyes

(2010) A.R. Khataee et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL

Comparative photocatalytic degradation of two dyes on immobilized TiO2 nanoparticles: Effect of dye molecular structure and response surface approach

(2010) M. Fathinia et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL

Optimization of biological treatment of a dye solution by macroalgae Cladophora sp. using response surface methodology

(2010) A.R. Khataee et al.   Journal of the Taiwan Institute of Chemical Engineers

Optimizing photocatalytic degradation of phenol by TiO2/GAC using response surface methodology

(2010) Jin-Chung Sin et al.   KOREAN JOURNAL OF CHEMICAL ENGINEERING

Amoxicillin degradation at ppb levels by Fenton's oxidation using design of experiments

(2010) Vera Homem et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Degradation of the antibiotic oxolinic acid by photocatalysis with TiO2 in suspension

(2010) Ana L. Giraldo et al.   WATER RESEARCH

TiO2/H2O2 mediated photocatalytic transformation of UV filter 4-methylbenzylidene camphor (4-MBC) in aqueous phase: Statistical optimization and photoproduct analysis

(2009) V.A. Sakkas et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Photocatalytic treatment of indoor air: Optimization of 2-propanol removal using a response surface methodology (RSM)

(2009) Daniel Vildozo et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Optimization of activated carbon fiber preparation from Kenaf using K2HPO4 as chemical activator for adsorption of phenolic compounds

(2009) Soheil Aber et al.   BIORESOURCE TECHNOLOGY

Optimization by factorial design of copper (II) and toxicity removal using a photocatalytic process with TiO2 as semiconductor

(2009) María C. Yeber et al.   CHEMICAL ENGINEERING JOURNAL

A Study of Photocatalytic Processes Involving the Degradation of the Organic Load and Amoxicillin in Hospital Wastewater

(2009) Ayrton F. Martins et al.   CLEAN-Soil Air Water

TiO2 nanofibre assisted photocatalytic degradation of Reactive Blue 19 dye from aqueous solution

(2009) A. Rezaee et al.   ENVIRONMENTAL TECHNOLOGY

Photocatalytic removal of C.I. Basic Red 46 on immobilized TiO2nanoparticles: Artificial neural network modelling

(2009) A.R. Khataee   ENVIRONMENTAL TECHNOLOGY

Crystallite phase-controlled preparation, characterisation and photocatalytic properties of titanium dioxide nanoparticles

(2009) A.R. Khataee et al.   Journal of Experimental Nanoscience

Minimization of organic content in simulated industrial wastewater by Fenton type processes: A case study

(2009) Ivana Grčić et al.   JOURNAL OF HAZARDOUS MATERIALS

Photocatalytic degradation of three azo dyes using immobilized TiO2 nanoparticles on glass plates activated by UV light irradiation: Influence of dye molecular structure

(2009) A.R. Khataee et al.   JOURNAL OF HAZARDOUS MATERIALS

Photocatalytic degradation using design of experiments: A review and example of the Congo red degradation

(2009) Vasilios A. Sakkas et al.   JOURNAL OF HAZARDOUS MATERIALS

Application of response surface methodology for optimization of peroxi-coagulation of textile dye solution using carbon nanotube–PTFE cathode

(2009) Mahmoud Zarei et al.   JOURNAL OF HAZARDOUS MATERIALS

Photoelectrocatalytic degradation of ethylene by a combination of TiO2 and activated carbon felts

(2009) Sheng-ying Ye et al.   JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY

Chemometric tools in electroanalytical chemistry: Methods for optimization based on factorial design and response surface methodology

(2009) César Ricardo Teixeira Tarley et al.   MICROCHEMICAL JOURNAL

Photocatalytic activities of Ion doped TiO2 thin films when prepared on different substrates

(2009) Maosheng Yao et al.   THIN SOLID FILMS

Biosorption of Cr(VI) from Water Using Biomass of Aeromonas hydrophila: Central Composite Design for Optimization of Process Variables

(2008) D. Ranjan et al.   APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY

Decolouration of Orange II solutions by TiO2 and ZnO active layers screen-printed on ceramic tiles under sunlight irradiation

(2008) E. Rego et al.   APPLIED CATALYSIS A-GENERAL

Multivariate experimental design for the photocatalytic degradation of imipramine

(2008) P. Calza et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Photocatalytic degradation of methylparaben by TiO2: Multivariable experimental design and mechanism

(2008) Yixin Lin et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Adsorption modelling of textile dyes by sepiolite

(2008) Sílvia C.R. Santos et al.   APPLIED CLAY SCIENCE

Removal of Cu(II) ions by biosorption onto powdered waste sludge (PWS) prior to biological treatment in an activated sludge unit: A statistical design approach

(2008) M. Yunus Pamukoglu et al.   BIORESOURCE TECHNOLOGY

Using the Box-Benkhen technique to statistically model phenol photocatalytic degradation by titanium dioxide nanoparticles

(2008) Srimanta Ray et al.   CHEMICAL ENGINEERING JOURNAL

Advanced Oxidation of Direct Red (DR 28) by Fenton Treatment

(2008) Filiz Ay et al.   ENVIRONMENTAL ENGINEERING SCIENCE

Modeling and Optimization of Heterogeneous Photo-Fenton Process with Response Surface Methodology and Artificial Neural Networks

(2008) M. B. Kasiri et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

OPTIMISATION OF REACTIVE DYE DEGRADATION BY LACCASE USING BOX–BEHNKEN DESIGN

(2008) R. O. Cristóvão et al.   ENVIRONMENTAL TECHNOLOGY

Photocatalytic decolouration of Orange II by ZnO active layers screen-printed on ceramic tiles

(2008) J. Marto et al.   JOURNAL OF HAZARDOUS MATERIALS

Optimization of the azo dye Procion Red H-EXL degradation by Fenton's reagent using experimental design

(2008) Carmen S.D. Rodrigues et al.   JOURNAL OF HAZARDOUS MATERIALS

Application of Doehlert matrix to determine the optimal conditions of electrochemical treatment of tannery effluents

(2008) Samiha Hammami et al.   JOURNAL OF HAZARDOUS MATERIALS

Decolorization of C.I. Acid Blue 9 solution by UV/Nano-TiO2, Fenton, Fenton-like, electro-Fenton and electrocoagulation processes: A comparative study

(2008) A.R. Khataee et al.   JOURNAL OF HAZARDOUS MATERIALS

Application of response surface methodology (RSM) for optimization of nutrient supplementation for Cr (VI) removal by Aspergillus lentulus AML05

(2008) Shweta Sharma et al.   JOURNAL OF HAZARDOUS MATERIALS

The optimization of Cr(VI) reduction and removal by electrocoagulation using response surface methodology

(2008) Tugba Ölmez   JOURNAL OF HAZARDOUS MATERIALS

Screen-printing of TiO2 photocatalytic layers on glazed ceramic tiles

(2008) P. São Marcos et al.   JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY

Reticulated macroporous ceramic foam supported TiO2 for photocatalytic applications

(2008) Gustav Plesch et al.   MATERIALS LETTERS

Optimization of hydroxyl radical formation using TiO2 as photocatalyst by response surface methodology

(2008) S EREMIA et al.   TALANTA

Optimization of Pb(II) biosorption by Robinia tree leaves using statistical design of experiments

(2008) Javad Zolgharnein et al.   TALANTA

Response surface methodology (RSM) as a tool for optimization in analytical chemistry

(2008) Marcos Almeida Bezerra et al.   TALANTA

Experimental design methodology applied to electro-Fenton treatment for degradation of herbicide chlortoluron

(2007) Aida Kesraoui Abdessalem et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Heterogeneous photocatalytic removal of toluene from air on building materials enriched with TiO2

(2007) Kristof Demeestere et al.   BUILDING AND ENVIRONMENT

Optimization of C.I. Acid Red 14 azo dye removal by electrocoagulation batch process with response surface methodology

(2007) A. Aleboyeh et al.   CHEMICAL ENGINEERING AND PROCESSING

Response surface optimization of the photocatalytic decolorization of a simulated dyestuff effluent

(2007) M.S. Secula et al.   CHEMICAL ENGINEERING JOURNAL

Photocatalyzed degradation of flumequine by doped TiO2 and simulated solar light

(2007) J. Nieto et al.   JOURNAL OF HAZARDOUS MATERIALS