- Home
- Publications
- Publication Search
- Publication Details
Title
Aluminum-Based Cast In Situ Composites: A Review
Authors
Keywords
Al<sub>2</sub>O<sub>3</sub>, AMC, casting, in situ composites, TiB<sub>2</sub>, TiC, Mg<sub>2</sub>Si, MMC
Journal
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Volume 24, Issue 6, Pages 2185-2207
Publisher
Springer Nature
Online
2015-02-20
DOI
10.1007/s11665-015-1424-2
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites
- (2014) Kangle Tian et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Abrasive Wear Behavior of In Situ TiC Reinforced with Al-4.5%Cu Matrix
- (2014) Anand Kumar et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Synthesis of submicrometer-sized TiC particles in aluminum melt at low melting temperature
- (2014) Zhiwei Liu et al. JOURNAL OF MATERIALS RESEARCH
- Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part II: Enhancing the practical aluminum foundry alloys using the improved Al–5wt%TiB2 master composite upon dilution
- (2014) Tongmin Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part I: An improved halide salt route to fabricate Al–5wt%TiB2 master composite
- (2014) Zongning Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Wear Behavior of In-Situ Al–AlN Metal Matrix Composites
- (2014) Sandeep Fale et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites
- (2013) H.B. Michael Rajan et al. Archives of Civil and Mechanical Engineering
- Influence of neodymium addition on microstructure, tensile properties and fracture behavior of cast Al-Mg2Si metal matrix composite
- (2013) Xiaofeng WU et al. JOURNAL OF RARE EARTHS
- Wear behaviours of Pb added Mg–Al–Si composites reinforced with in situ Mg2Si particles
- (2013) Bünyamin Çiçek et al. MATERIALS & DESIGN
- Improvement of yield strength of LM24 alloy
- (2013) Yijie Zhang et al. MATERIALS & DESIGN
- Effect of hot extrusion on wear properties of Al–15wt.% Mg2Si in situ metal matrix composites
- (2013) N. Soltani et al. MATERIALS & DESIGN
- On friction stir butt welding of Al+12Si/10wt%TiC in situ composite
- (2013) Belete Sirahbizu Yigezu et al. MATERIALS & DESIGN
- Effect of high magnesium content on microstructure of Al–7Si alloy
- (2013) A. Mandal et al. MATERIALS LETTERS
- Mechanical properties of in-situ TiB2/A356 composites
- (2013) Mingliang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite
- (2013) Niloofar Soltani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Feasible process for producing in situ Al/TiC composites by combustion reaction in an Al melt
- (2013) Young-Hee Cho et al. METALS AND MATERIALS INTERNATIONAL
- Microstructure and dry sliding wear behavior of cast Al–Mg2Si in-situ metal matrix composite modified by Nd
- (2013) Xiao-Feng Wu et al. RARE METALS
- Effect of ultrasonic on morphology of primary Mg2Si in in-situ Mg2Si/Al composite
- (2013) Jia-tao ZHANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Modeling the abrasive wear characteristics of in-situ synthesized Al–4.5%Cu/TiC composites
- (2013) Anand Kumar et al. WEAR
- Nucleation Criteria for the Formation of Aluminum Nitride in Aluminum Matrix by Nitridation
- (2013) Sandeep Fale et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Fabrication of Al–Si–Mg functionally graded materials tube reinforced with in situ Si/Mg2Si particles by centrifugal casting
- (2012) Xuedong Lin et al. COMPOSITES PART B-ENGINEERING
- Fabrication of in situ AlN-TiN/Al inoculant and its refining efficiency and reinforcing effect on pure aluminum
- (2012) Kui Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties
- (2012) E. Georgatis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Dry sliding wear behaviour of in situ Al–TiB2 composites
- (2012) K. Niranjan et al. MATERIALS & DESIGN
- The effect of Fe-rich intermetallics on the microstructure, hardness and tensile properties of Al–Mg2Si die-cast composite
- (2012) M. Emamy et al. MATERIALS & DESIGN
- Wear Behaviour of Squeeze-Cast Al 2014 Alloy and In-Situ 5 vol% TiB2/2014 Composite
- (2012) J. Xue et al. MATERIALS TRANSACTIONS
- Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in situ TiB2p/Al–12Si–4Cu composites
- (2011) Zhiwei Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Impact behavior of in situ TiB2/Al composite at various temperatures
- (2011) Feifei Wang et al. JOURNAL OF MATERIALS SCIENCE
- Mechanism and kinetic model of in-situ TiB2/7055Al nanocomposites synthesized under high intensity ultrasonic field
- (2011) Dengbin Chen et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- The effect of solution temperature on the microstructure and tensile properties of Al–15%Mg2Si composite
- (2011) A. Malekan et al. MATERIALS & DESIGN
- Mechanical and wear behaviors of Al–12Si–XMg composites reinforced with in situ Mg2Si particles
- (2011) Yavuz Sun et al. MATERIALS & DESIGN
- The microstructure, hardness and tensile properties of Al–15%Mg2Si in situ composite with yttrium addition
- (2011) M. Emamy et al. MATERIALS & DESIGN
- Fatigue crack initiation and propagation in A356 alloy reinforced with in situ TiB2 particles
- (2011) Feifei Wang et al. MATERIALS & DESIGN
- The influence of pure Na on the microstructure and tensile properties of Al-Mg2Si metal matrix composite
- (2011) M. Emamy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A study on microstructure and mechanical properties of Al 6061–TiB2 in-situ composites
- (2011) C.S. Ramesh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of in situ formed ZrB2 particles on microstructure and mechanical properties of AA6061 metal matrix composites
- (2011) I. Dinaharan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites
- (2011) C.S. Ramesh et al. WEAR
- Characterization of microstructure and precipitation behavior in Al-4Cu-xTiB2 in-situ composite
- (2011) Nikhil Charbhai et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Precipitation kinetics in Al-Si-Mg/TiB2 in-situ composites
- (2011) Sree Harsha Nandam et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- In situ Al2O3 particle-reinforced Al and Cu matrix composites synthesized by displacement reactions
- (2010) Bin Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis and characterization of in situ Al–AlN composite by nitrogen gas bubbling method
- (2010) S.S. Sreeja Kumari et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Production of in situ aluminum–titanium diboride master alloy formed by slag–metal reaction
- (2010) Ahmad Changizi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites
- (2010) Hongming Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and tensile properties of in situ TiCp/Al–4.5wt.% Cu composites obtained by direct reaction synthesis
- (2010) Y.F. Liang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of mushy state rolling on age-hardening and tensile behavior of Al–4.5Cu alloy and in situ Al–4.5Cu–5TiB2 composite
- (2010) I.G. Siddhalingeshwar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High temperature wear behavior of Al–4Cu–TiB2 in situ composites
- (2010) S. Kumar et al. WEAR
- Synthesis of Al -TiC in-situ composites: Effect of processing temperature and Ti:C ratio
- (2010) Ranjit Bauri TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- The influence of room temperature and cryogenic temperature rolling on the aging and wear behaviour of Al–4Cu–5TiB2 in situ composites
- (2009) S. Kumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature
- (2009) G. Naveen Kumar et al. MATERIALS & DESIGN
- Development of Al 6063–TiB2 in situ composites
- (2009) C.S. Ramesh et al. MATERIALS & DESIGN
- Functionally Graded Al Alloy Matrix In-Situ Composites
- (2009) S. Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Modification of Cast Al-Mg2Si Metal Matrix Composite by Li
- (2009) R. Hadian et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Synthesis of TiC composite by salt route and grain refinement of aluminium alloy
- (2008) A. Sharma INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Fabrication of in situ aluminum–alumina composite with glass powder
- (2008) Majid Hoseini et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures
- (2008) S. Natarajan et al. MATERIALS & DESIGN
- The effect of Li on the tensile properties of cast Al–Mg2Si metal matrix composite
- (2008) R. Hadian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on abrasive and erosive wear behaviour of Al 6063/TiB2 in situ composites
- (2008) K. Sivaprasad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ageing behaviour of A356 alloy reinforced with in-situ formed TiB2 particles
- (2008) A. Mandal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wear behaviour of near eutectic Al–Si alloy reinforced with in-situ TiB2 particles
- (2008) A. Mandal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Temperature on the Wear Behavior of Al-7Si-TiB2 In-Situ Composites
- (2008) S. Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Sliding wear behaviour of T6 treated A356–TiB2 in-situ composites
- (2008) A. Mandal et al. WEAR
- Equal channel angular pressing of Al–5wt% TiB2 in situ composite
- (2007) K.R. Ravi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A statistical analysis on erosion wear behaviour of A356 alloy reinforced with in situ formed TiB2 particles
- (2007) S. Kumar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites
- (2007) S. Kumar et al. WEAR
- In situ synthesis of Al–TiCp composites by reacting K2TiF6 and particulate graphite in molten aluminium
- (2006) Y. Birol JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication and dry sliding wear behavior of in situ Al–K2ZrF6–KBF4 composites reinforced by Al3Zr and ZrB2 particles
- (2006) Song-Li Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now