Heat-assisted slurry sampling GFAAS method for determination of lead in food standard reference materials

A valid method based on heat-assisted slurry sampling graphic furnace atomic absorption spectrometry (HASS-GFAAS) was developed for the accurate determination of trace Pb in food standard reference materials (SRMs). The HASS technique significantly improved Pb recovery and precision compared to conventional slurry sampling techniques. The optimized HASS procedure was performed as follows: first, the sample (particle size <= 150 mu m) was diluted with 0.05% (v/v) Triton X-100 containing 2% HNO3 and 1% H2O2 followed by heating for 20 min at 120 degrees C on a heating block. Next, the obtained slurry was sonicated in an autosampler cup, and finally, the slurry was introduced into a graphite tube and analyzed by the GFAAS with a Pb electrodeless discharge lamp (EDL). Calibration with aqueous standard solutions was used for Pb determination in food samples. The characteristic mass and limit of detection for Pb based on the integrated absorbance for a 2% (m/v) sample were 12 +/- 0.6 pg and 0.003 mg kg(-1), respectively. The accuracy (95.1-102% recovery) and good precision (0.1-3.6%) of this procedure are illustrated by the results obtained for the 12 food reference materials. The, proposed method is suitable for determination of trace Pb in solid food samples. (C) 2015 Elsevier Inc. All rights reserved.